·······················Disc Tray Open / Close
······························Power On / O
USB Port ··················Connect a USB device.
DC IN 12 V 01 A ······· Connect to AC Adaptor.
LAN ·························Connect to Internet.
HDMI OUT (TO TV)················ Connect to TV.
Front Panel Rear Panel
TV Connection
With
HDMI IN
TV
bSet the input selector to HDMI on the TV.
cFollow the instructions on the TV screen using
remote control.
aConnect the HDMI jack on the player to the
HDMI jack on the TV using a HDMI cable.
After initial setup, Home menu appears on the TV
screen. Enjoy various functions on the player.
For more information, download the online owner’s
manual. http://www.lg.com
Controller App
1 Home Menu2
+
Download the LG AV Remote App to your device.
To enjoy online services, the player should
be connected to internet through wired or
wireless connection.
Specication
AC adapter
yModel : WA-12M12FU
yManufacturer :
Asian Power Devices Inc.
yInput : 100-120 V~
50-60 Hz 0.5 A Max.
yOutput : 12 V 01 A
Dimensions
(W x H x D)
Approx.
270 mm x 43 mm x 195 mm
(10.62 inch x 1.69 inch x
7.68 inch)
Net Weight (Approx.) 0.84 kg (1.85 lb)
Bus Power Supply
(USB) 5 V 0500 mA
Design and specications are subject to change without
notice.
Replacement of battery
AAA(R03)
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping,
and handling) upon email request to opensource@lge.
com. This oer is valid for three (3) years from the date on
which you purchased the product.
WARNING: This product contains chemicals known to
the State of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
FCC Compliance Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and
receiver.
yConnect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation. Any changes or modications in construction
of this device which are not expressly approved by the
party responsible for compliance could void the user’s
authority to operate this equipment.
Additional Information
