LG LS40 User manual

Service Manual
LG Electronics
(LS40, LS50)
All manuals and user guides at all-guides.com
all-guides.com

2
1010 Battery Pack
1. Push the battery latch in the direction shown below; then slide the battery pack out of the slot.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

3
1020 Hard Disk Drive
1M3.0 X L6.01SZZBA4085A1
EASpecificationFRU No.No.
1. Remove a screw as indicated in the picture, then pull the HDD Assy out in the direction shown below.
Remove the battery pack (1010) before replacing this part
1
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

4
2M2.0 X L8.01SZZBA4083A1
EASpecificationFRU No.No.
1030 Keyboard
1. Remove 2 screws.
Remove the battery pack (1010) before replacing this part
1
1
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

5
2. To remove three hooks, insert a (-) type screwdriver into a hook located at the lower end of keyboard, and pull it
up.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

6
1
3. Disconnect the keyboard connector.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com
all-guides.com

7
1. Pull up the retainer, and remover the connector using a (-) type screwdriver.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030)
1040 Retainer
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

8
1
3M2.0 X L8.81SZZBZ4020A1
EASpecificationFRU No.No.
1
1
1050 Fan Assembly
1. After removing a screw and the connector, pull up and remove the fan Assy using a (-) type screwdriver.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030) Retainer (1040)
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

9
1050 Fan Assembly
1. After removing a screw and the connector, pull up and remove the fan Assy using a (-) type screwdriver.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030) Retainer (1040)
3M2.0 X L8.81SZZBZ4020A1
QtyScrewFRU No.No.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

10
1
1060-1 Optical Disk Drive (14.1” Model)
1. Remove a screw, insert a screwdriver into the back side of ODD and push it out.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030) Retainer (1040)
1M2.0 X L5.01SZZBZ4014A1
QtyScrewFRU No.No.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

11
1060-2 Optical Disk Drive (15” Model)
1. Remove a screw, insert a screwdriver into the hole located at the rear of ODD and push it out.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030) Retainer (1040)
1M2.0 X L5.01SZZBZ4014A1
QtyScrewFRU No.No.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com
all-guides.com

12
1070 Wireless LAN Card
1. Remove two wireless LAN card connector, open card knob to take out the card.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030) Retainer (1040)
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

13
1
1
1080 MDC Modem Card
1. Remove two screws and insert a screwdriver below the modem. Pull it up to disassemble.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030) Retainer (1040)
2M2.0 X L3.51SZZBA4017B1
QtyScrewFRU No.No.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

14
11
11
1090 Display Module
1. Remove two screws.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030) Retainer (1040)
Wireless LAN Card (1070)
2M2.5 X L8.01SZZBA4039B1
QtyScrewFRU No.No.
2. Remove two hinge cover screws.
2M2.0 X L5.01SZZBZ4014A1
QtyScrewFRU No.No.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

15
11
3. Using a (-) type screwdriver from the back of the LCD, pull up the hinge cover with your finger. The more you
move the LCD to the back, the easier the hinge cover will pull out. Remove another hinge cover located on the
other side.
4. Remove two hinge screws.
2M2.5 X L8.01SZZBA4039B1
QtyScrewFRU No.No.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

16
5. Remove the LCD connector located at the upper end of MCD modem. You will see a tag designed to make the
work easier. Pull out the tag.
6. Remove the LCD cable.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com
all-guides.com

17
7. Hold the LCD with your both hands, and pull it up to remove.
See: Display Module disassembly in detail (1140)
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

18
QtyScrewFRU No.No.
2M2.0 X L3.01SZZBA4017A3
9M2.0 X L81SZZBA4083A1
2M2.0 X L151SZZBZ3010Z2
1100 Key Deck
1. Remove 14 screws (for 15” model) or 11 screws (for 14.1” model). The screw type is shown on the set for
your reference.
Remove the following parts in order before replacing this part
Battery Pack (1010) Keyboard (1030) Retainer (1040)
Fan Assembly (1050) Wireless LAN Card (1070) MDC Modem Card (1080)
Display Module (1090)
Screw Specification
11
11
11
1
1
1
2
2
3 3
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

19
QtyScrewFRU No.No.
2M2.0 X L3.01SZZBA4017A1
1
1
QtyScrewFRU No.No.
2M2.0 X L3.01SZZBA4041A1
3. Open ODD plate and remove two screws
2. Open the I/O port cover and remove two screws.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com

20
4. Remove the cable, hold the keyboard deck with your both hands and pull it out.
Removing and replacing a part (FRU)
All manuals and user guides at all-guides.com