LG NP8350B User manual

Please read this manual carefully before
operating your speaker and retain it for future
reference.
ENGLISH | OWNER’S MANUAL
Model : NP8350 / NP8350B
NP8350W / NP8350D
NA9350
SMART Hi-Fi AUDIO
Wireless Multi-room
Copyright © 2015-2017 LG Electronics Inc. All Rights Reserved.
www.lg.com

1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
NOTICE: For safety marking information including
product identication and supply ratings, please
refer to the main label on the bottom or rear of the
apparatus.
For models using an adapter
Only use the AC adapter supplied with this device.
Do not use a power supply from another device or
another manufacturer. Using any other power cable
or power supply may cause damage to the device
and void your warranty.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In
case of an emergency, the Power Plug must remain
readily accessible.
Check the specication page of this owner’s
manual to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in electric shock or re.
Periodically examine the cord of your device, and if
its appearance indicates damage or deterioration,
unplug it, discontinue use of the device, and have
the cord replaced with an exact replacement part
by an authorized service center. Protect the power
cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door,
or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the
device.
CAUTION:
yThe apparatus should not be exposed to water
(dripping or splashing) and no objects lled with
liquids, such as vases, should be placed on the
apparatus.
yNo naked ame sources, such as lighted candles,
should be placed on the apparatus.
yTo avoid re or electric shock, do not open the
unit. Contact to qualied personnel only.
yDo not leave the unit in a place near the heating
appliances or subject to direct sunlight, moisture,
or mechanical shock.
yTo clean the unit, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the
surface of the unit.
yDo not use volatile liquids such as insecticide
spray near the unit. Wiping with strong pressure
may damage the surface. Do not leave rubber
or plastic products in contact with the unit for a
long period of time.
yDo not place the unit over the vehicle’s air bag.
When the air bag deploys, it may result in injury.
Before using in the car, x the unit.
yDo not leave the unit on an unstable place such
as high shelves. It may fall down because of the
vibration of the sound.

Getting Started 3
Getting Started
1
Removal of waste batteries and accumulators
(Product with embedded battery ONLY)
In case this product contains a battery incorporated
within the product which cannot be readily
removed by endusers, LG recommends that only
qualified professionals remove the battery, either
for replacement or for recycling at the end of this
product’s working life. To prevent damage to the
product, and for their own safety, users should
not attempt to remove the battery and should
contact LG Service Helpline, or other independent
service providers for advice. Removal of the battery
will involve dismantling of the product case,
disconnection of the electrical cables/
contacts, and careful extraction of the battery cell
using specialized tools.
If you need the instructions for qualified
professionals on how to remove the battery
safely, please visit http://www.lge.com/global/
sustainability/environment/take-back-recycling.
CAUTION: Internal lithium battery in the unit
should not be replaced by user because of danger
of explosion if battery is incorrectly replaced ,and
must be replaced with the same type battery by
expert.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery should not be exposed
to excessive heat such as sunshine, re or the like.
CAUTION when using this product in
environments of low humidity
yIt may cause static electricity in environments of
low humidity.
yIt is recommended to use this product after
touching any metal object which conducts
electricity.

Table of Contents4
Table of Contents
1 Getting Started
2 Safety Information
6 Main Features
6 Accessories
6 Introduction
7 Product Overview
2 Connecting
8 Charging the Unit
8 – Checking the charging status
8 Initial Multi-Room Setup
8 – Wireless connection
(Standard Wireless Connection)
9 Installing “Music Flow Player” App
10 – Starting with Music Flow Player app
11 Connecting the speaker to your Home
Network
11 – Simple Connection (EZ Setup)
12 – Connecting the speaker to your
Network via the Wi-Fi Setup Method
(Android)
15 – Connecting the speaker to your
Network via the Wi-Fi Setup Method
(iOS)
19 Connecting the speakers to your Home
Network (Additional)
19 – Connecting the additional speaker to
your network with a LAN cable
21 – Connecting the additional speaker
to your network via the Wi-Fi Setup
Method (Android)
23 Using the Bridge
23 – Use as a root device (wired to the
home router)
24 – Use as a wireless extender
26 Using Media Server for PC
26 – Music Flow PC Software for windows
27 – Nero MediaHome 4 Essentials for
Mac OS
3 Operating
28 Basic Operations
28 – Using 1/! button
28 Enjoying the Music with Music Flow Player
app
29 – Overview of Home menu
30 – Overview of the side menu
30 – Playing a song
32 – Overview of Playback
33 – Group Playback
35 – Seamless playback
36 Setting the Speaker with Music Flow
Player app
37 – Overview of setting menu
37 – [General] Menu
38 – [Speakers] Menu
38 – [Alarms/Sleep Timer] Menu
39 – [Account management] Menu
39 – [Time Zone] Menu
39 – [Advanced Settings] Menu
41 – [Chromecast] Menu
42 – [Version Info.] Menu
42 – [Open source licenses] Menu
42 Using a Bluetooth Wireless Technology
42 – About Bluetooth
42 – Bluetooth profiles
42 – Listening to Music of a Bluetooth
Device
44 Listening to Music from Your External
Device
44 Standby mode
44 – Standby mode
44 – Network standby mode
45 Reset the Speaker
45 – Resetting the speaker
45 – Resetting the Music Flow R1
4 Troubleshooting
46 Troubleshooting
46 – General
47 – Network
48 – Application and PC Software

Table of Contents 5
1
2
3
4
5
5 Appendix
49 File requirement
49 Trademarks and Licenses
50 About Status LED’s Condition
51 Specifications
52 Handling the Speaker
52 Important Information Relating to
Network Services
53 TERMS OF USE
Some of the content in this manual may dier from Music Flow Player app depending on the
application’s version.

Getting Started6
Getting Started
1
Main Features
Made for iPod/iPhone/iPad or
Android device
Enjoys music from iPod/iPhone/iPad or Android
device with simple connection.
Portable In
Listens to music from your portable device.
Music Flow Player application
Listens to music stored on your smart device.
You can control this speaker with your iPod touch/
iPhone/iPad or Android device via Music Flow
Player app. This speaker and your smart device
must be connected to the same network. Visit
Apple “App Store”or Google“Play Store” or use the
QR code shown below to search for “Music Flow
Player” app. For detailed information, refer to page
9.
(Apple iOS)
(Android OS)
yDepending on the application’s version and the
settings of smart device, Music Flow Player app
may not be operated normally.
ySome smart devices may not be compatible with
this speaker.
Accessories
Please check and identify the supplied accessories.
AC adapter (1)
Introduction
Symbol used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.

Getting Started 7
Getting Started
1
Product Overview
a 1/! (Standby/On)
bF (Function): Selects the function and input
source.
c
-/+ (Volume)
d (Play/Pause) : Starts playback or pauses
playback.
e
Speaker
f (Wi-Fi): Connects initial Music Flow product
to your network wirelessly. (page 12)
g (Add): Adds additional Music Flow products
to your network. (In case one or more Music
Flow products are connected)
h (Portable Input): Connects the external
device.
i
DC IN 12V: Connects the supplied AC adapter.

2 Connecting
Connecting8
Connecting
2
Charging the Unit
This unit uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
> Caution
Checking the charging status
Charging : 1/! button turns red.
Fully charged : 1/! button turns white.
How to check the battery life:
when the unit is turned on, press the 1/!
1/! (White) : More than 60 %
1/! (Amber) : More than 15 %
1/! (Amber Blinking) : Less than 15 %
, Note
Initial Multi-Room
Setup
Wireless connection (Standard
Wireless Connection)
Music Flow products oer music streaming service
within home router’s Wi-Fi coverage.
Connect one of the your speaker to the home
router wirelessly.
Then you can connect the additional Music
Flow products (Optional) to your home network
wirelessly. Refer to“Connecting the speakers to
your Home Network (Additional)”on page 19.
Wireless signal

Connecting 9
Connecting
2
Installing “Music Flow
Player” App
Through Apple “App Store” or
Google “Play Store”
1. Tap the Apple “App Store” icon or Google “Play
Store” icon.
2. Type in“Music Flow Player” in the search bar and
tap “Search”.
3. Select “Music Flow Player” in the search result list
to download.
yMusic Flow Player app will be available in
version of the software as follow;
Android O/S : Ver 4.0 (or later)
iOS O/S : Ver 6.0 (or later)
yDepending on the device, “Music Flow
Player” app may not work.
, Note
Through QR code
Install “Music Flow Player” app through QR code.
Scan the QR code using the scanning application.
(Apple iOS)
(Android OS)
yMake sure that your smart device is
connected to the internet.
yMake sure that your smart device has a
scanning application. If you don’t have,
download it from Apple“App Store” or
Google “Play Store”.
, Note

Connecting10
Connecting
2
Starting with Music Flow
Player app
When you launch Music Flow Player app for the
rst time, the terms of use and Chromecast Service
appear on the screen.
1. Check the contents of terms of use and select
[Accept].
2. Check the contents of Chromecast Service and
select [Accept].
3. Select [Connect product] to install the speaker
you’ve purchased.
Refer to“Connecting the speaker to your Home
Network” on page 11.
If you want to return to the terms of use
screen, initialize the Music Flow Player app on
the smart device’s setting menu.
, Note

Connecting 11
Connecting
2
Connecting the
speaker to your Home
Network
Please refer to the documentation for your network
device for further instructions.
Preparation
yMake sure that wireless network environment
using a router is installed at your home.
yMake sure that the speaker and the smart device
are connected to the same router.
Requirements
yWireless router
ySmart device (Android or iOS)
yMake sure that DHCP’s server is activated on
wireless router.
yIf you cannot connect the speaker with your
router, go to setting of the router and then
make sure that “Allow wireless client to see
each other and access my local network”
box is unchecked.
, Note
Simple Connection (EZ Setup)
Preparation
yFor Simple Connection, Wi-Fi network condition
is needed.
yMake sure that the Bluetooth setting on your
smart device in on.
ySimple Connection is supported by
Bluetooth Ver 4.0 (or higher).
yIf Simple Connection screen is not displayed
on the screen, connect the unit by the other
way. Please refer to “Connecting the speaker
to your Network via the Wi-Fi Setup Method”
(page 12 or page 15)
, Note
1. Plug in the desired device, and tap [Next].
2. App searches for the speaker and connects it
automatically, Tap [Next].

Connecting12
Connecting
2
3. If the network password is set, security screen is
displayed. Type the password.
4. After typing password, tap [Next].
5. Tap [Finish] to finish making the connection.
Connecting the speaker to
your Network via the Wi-Fi
Setup Method (Android)
Connection overview
Broadband
service
Router

Connecting 13
Connecting
2
1. Plug the speaker into an electrical outlet.
The F(Function) LED starts to blink white.
2. On your smart device, launch Music Flow Player
app. Select [Connect product] to install the
speaker.
3. Select the product you want to connect and
tap [Next] on the screen.
4. Press the button on the side of the speaker.
Then F(Function) LED blinks white and red
alternately.
5. Then select [Next] on the screen.
6. If you have a password for your network, the
security screen appears on your smart device.
Enter your password.

Connecting14
Connecting
2
7. Then select [Next] on the screen.
8. Select [Finish] to complete the connection.
(If there is an update)
9. This application is checking the Version of
software of your speaker and then shows the
version.
Select [Next] after checking the version
information.
If the speaker fails to connect to your network
or its network connection operates abnormally,
place the speaker closer to your router and try
again.
, Note

Connecting 15
Connecting
2
Connecting the speaker to
your Network via the Wi-Fi
Setup Method (iOS)
Connection overview
Broadband
service
Router
1. Plug the speaker into an electrical outlet.
The F(Function) LED starts to blink white.
2. On your smart device, launch Music Flow Player
app. Select [Connect product] to install the
speaker.
3. Select the product you want to connect and
tap [Next] on the screen.

Connecting16
Connecting
2
4. Press the button on the side of the speaker.
Then F(Function) LED blinks white and red
alternately.
5. Then select [Next] on the screen.
6. On your iOS device, go to iOS setting -> Wi-
Fi setting and select“MusicFlow_Setup”to
connect.
yIf “MusicFlow_Setup” is not on the list, scan
for available Wi-Fi networks again.
yWhen your smart device is connected to
“MusicFlow_Setup”, you cannot use the
internet.
, Note

Connecting 17
Connecting
2
7. If you have a password for your network, the
security screen appears on your smart device.
Enter your password.
8. Then select [Next] on the screen.
9. Then select [Next] on the screen.
10. Select [Finish] to complete the connection.
If the speaker fails to connect to your network
or its network connection operates abnormally,
place the speaker closer to your router and try
again.
, Note

Connecting18
Connecting
2
Notes on Network Connection
yMany network connection problems during set
up can often be xed by re-setting the router.
After connecting the speaker to the home
network, quickly power o and/or disconnect
the power cable of the home network router or
cable modem. Then power on and/or connect
the power cable again.
yOur company is not responsible for any
malfunction of the speaker and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection or other
connected equipment.
yThe wireless network operate at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be
aected by interference from them.
yTurn o all unused network equipment in
your local home network. Some devices may
generate network trac.
yIf the speaker fails to connect to your network
or its network connection operates abnormally,
place the speaker closer to your router and try
again.
yDepending on your home network environment
and the performance of wireless router, it may
not work well to connect the speaker to your
wireless router.
yYou cannot connect the speaker to wireless
router which has hidden SSID.
yThe connection you’ve made may be
disconnected if you select other application or
change the setting of the connected speaker via
“Music Flow Player” app. In such a case, please
check the connection status.
yEven After connection of Music Flow Player app,
music may be output from your smart device. In
this case, select the connected speaker on the
playback screen.
yDepending on the speed of your network,
playback of online contents may not work well.
yWireless signal interference may lead to
disconnection of network or stopping playback.
yYou need to turn the speaker’s power o and on
again if you restart the router.
yYou need to perform a factory set and setup the
network connection for speaker, if you install
new router.
yIf you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed dierently.

Connecting 19
Connecting
2
Connecting the
speakers to your Home
Network (Additional)
You can enjoy the music with multiple speakers
and single smart device you have.
Requirements
yWireless router
ySmart device (Android or iOS)
yAnother speaker
Signal interference may lead to stop playback.
, Note
Connecting the additional
speaker to your network with a
LAN cable
Broadband service
Router
Speaker (Main)
Speaker (Add)
LAN cable
Connection overview
1. Connect the speaker (Main) to your network.
Refer to“Connecting the speaker to your Home
network” on page 11.
2. On your smart device, select the Music Flow
Player app. Tap the button.
3. Select the [Add Speaker] on the side menu.
You can also add another speaker by using
button on the screen of [Connected
Speakers].
, Note

Connecting20
Connecting
2
4. Select the product you want to connect and
tap [Next] on the screen.
5. Select [Wired connection] on the screen.
6. Connect one end of the LAN cable to the
speaker’s ETHERNET port and connect the other
end to your wireless router.
Wait a moment until the LED indicator stops
blinking and stays white.
7. Then select [Next] on the screen.
8. Select [Finish] to complete the connection.