LG WD-1250ERD User manual

Washing Machine
OWNER'S MANUAL
WD-1250ARD
WD-1250ERD
Thank you for buying a
LG Fully Au oma ic Washing machine.
Please read your owner's manual carefully, i provides
ins ruc ions on safe ins alla ion, use and main enance.
Re ain i for fu ure reference.
Record he model and serial numbers of your washing
machine.

roduct Feature
P
ontents
C
2
Warnings ......................................................................................................................3
Specifica ion...................................................................................................................5
Ins alla ion......................................................................................................................6
Care before washing....................................................................................................12
Adding de ergen ..........................................................................................................13
Func ion ....................................................................................................................15
How o use washer ......................................................................................................16
Main enance ................................................................................................................26
Troubleshoo ing guide .................................................................................................30
Terms of Warran y .......................................................................................................34
Direct Drive System
The advanced Brushless DC mo or direc ly drives he drum wi hou
bel and pulley.
Water Circulation
Sprays de ergen solu ion and wa er on o he load over and over.
Clo hes are soaked more quickly and horoughly during wash cycle.
The de ergen suds can be removed more easily by he wa er shower during rinse
cycle. The wa er circula ion sys em uses bo h wa er and de ergen more efficien ly.
Tilted Drum and Extra Large Door Opening
Til ed drum and ex ra large opening make i possible o load
and unload clo hing more easily.
Steam Washing and Refresh
S eam Washing fea ures upgraded washing performance wi h low energy and
wa er consump ion. Refresh cycle removes wrinkles from dry clo hes.
RollerJets
Washing ball enhances he wash performance and reduces damage
o he clo hing. The je s spray and help umble clo hes o enhance
washing performance while main aining fabric care.
Automatic Wash Load Detection
Au oma ically de ec s he load and op imizes he washing ime.
Built-in Heater
In ernal hea er helps o main ain wa er empera ure a i s op imum level for selec ed
cycles.
Child Lock
The Child lock preven s children from pressing any bu on o change he se ings
during opera ion.
추가선택, 예약,

arnings
W
3
For your sa ety, the in ormation in this manual must be ollowed to minimize
the risk o ire or explosion, electric shock, or to prevent property damage,
personal injury, or loss o li e.
!
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
• Do no ins all or s ore he washer where i will
be exposed o he wea her.
• Do no amper wi h con rols.
• Do no repair or replace any par of he washer
or a emp any servicing unless specifically
recommended in he user-main enance
ins ruc ions or published user-repair ins ruc ions
ha you unders and and have he skills o carry
ou .
• Keep he area undernea h and around your
appliances free of combus ible ma erials such as
lin , paper, rags, chemicals, e c.
• Close supervision is necessary if his appliance
is used by or near children or infirm persons.
Do no allow hem o play on, wi h, or inside his
or any o her appliance.
• Keep washer away from fire.
• Do no leave he washer door open.
An open door could en ice children o hang on
he door or crawl inside he washer.
• Never reach in o washer while i is moving. Wai
un il he drum has comple ely s opped.
• The laundry process can reduce he flame
re ardan of fabrics.
• Do no wash or dry ar icles ha have been
cleaned in, washed in, soaked in, or spo ed wi h
combus ible or explosive subs ances (such as
wax, oil, pain , gasoline, degreasers, dry
cleaning solven s, kerosene, e c.) which may
igni e or explode. Oil may remain in he ub af er
a whole cycle resul ing in fire during drying. So,
do no load oiled clo hes.
• Always follow he fabric care ins ruc ions
supplied by he garmen manufac urer.
• Do no slam he washer door closed or ry o
force he door open when locked. This could
resul in damage o he washer.
• To minimize he possibili y of elec ric shock,
unplug his appliance from he power supply or
disconnec he washer a he household
dis ribu ion panel by removing he fuse or
swi ching off he circui breaker before
a emp ing any main enance or cleaning.
• Never a emp o opera e his appliance if i is
damaged, malfunc ioning, par ially
disassembled, or has missing or broken par s,
including a damaged cord or plug.
• Dryer is in ended for only drying ex ile ma erial.
• If he washer has been exposed o wa er, call an
au horized service provider o avoid any risk of
fire or elec ric shock.
GROUNDING INSTRUCTIONS
This appliance mus be grounded. In he even of malfunc ion or breakdown, grounding will reduce he risk
of elec ric shock by providing a pa h of leas resis ance for elec ric curren . This appliance is equipped wi h
a cord having an equipmen -grounding conduc or and grounding plug. The plug mus be plugged in o an
appropria e ou le ha is properly ins alled and grounded in accordance wi h all local codes and ordinance.
• Do no use an adap er or o herwise defea he grounding plug.
• If you don’ have he proper ou le , consul an elec rician.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce he risk of fire, elec ric shock, or injury o persons when using
he washer, follow basic precau ions, including he following:
SAVE THESE INSTRUCTIONS
WARNING :Improper connec ion of he equipmen -grounding conduc or can resul in risk of elec ric
shock. Check wi h a qualified elec rician or serviceman if you are in doub as o whe her he appliance is
properly grounded. Do no modify he plug provided wi h he appliance - if i does no fi he ou le , have a
proper ou le ins alled by a qualified elec rician.

arnings
W
4
To minimize the risk o ire in a tumble dryer, the ollowing should be observed:
• I ems ha have been spo ed or soaked wi h vege able or cooking oil cons i u e a fire
hazard and should no be placed in a umble dryer.
Oil-affec ed i ems can igni e spon aneously, especially when exposed o hea
sources Such as in a umble dryer. The i ems become warm, causing an oxida ion
reac ion in he oil. Oxida ion crea es hea . If he hea canno escape, he i ems can
become ho enough o ca ch fire. Piling, s acking or s oring oil-affec ed i ems can
preven hea from escaping and so crea e a fire hazard.
If i is unavoidable ha fabrics ha con ain vege able or cooking oil or have been
con amina ed by hair care produc s be placed in a umble dryer hey should firs be
washed in ho wa er wi h ex ra de ergen - his will reduce, bu no elimina e, he
hazard. Washed in ho wa er wi h ex ra de ergen - his will reduce, bu no
elimina e, he hazard.
• I ems ha have been previously cleaned in, washed in, soaked in or spo ed wi h
pe rol/gasoline, dry-cleaning solven s or o her flammable or explosive subs ances
should no be placed in a umble dryer.
Highly flammable subs ances commonly used in domes ic environmen s include
ace one, dena ured alcohol, pe rol/gasoline, kerosene, spo removers (some
brands), urpen ine, waxes and was removers.
• I ems con aining foam rubber (also known as la ex foam) or similarly es ured
rubber. like ma erials should no be dried in a umble dryer on a hea se ing.
Foam rubber ma erials can, when hea ed, produce fire by spon aneous combus ion.
• Fabric sof eners or similar produc s should no be used in a umble dryer o elimina e
he effec s of s a ic elec rici y unless his prac ice is specifically recommended by he
manufac urer of he fabric sof ener or produc .
• Undergarmen s ha con ain me al reinforcemen s should no be placed in a umble
dryer.
Damage o he umble dryer can resul if me al reinforcemen s come loose during
drying. When available a drying rack could be used for such i ems.
• Plas ic ar icles such as shower caps or babies wa erproof napkin covers should no
be placed in a umble dryer.
• Rubber-backed ar icles, clo hes fi ed wi h foam rubber pads, pillows, galoshes and
rubber-coa ed ennis shoes should no be placed in a umble dryer.

5
pecification
S
Inlet Hose
20%
__ _ 1200rpm 60°C
Normal
DOORLOCK
Washing
1:12
EST.TIME
REMAINING
Name : Fron loading washing machine
Power supply : 220-240V~, 50Hz
Size : 635mm(W) x 720mm(D) x 925(H)
Weigh : 80kg
Wash capaci y : 12kg(2200W)
Dry capaci y : 7kg(2200W)
Max. Wa : 2200W
Spin speed : No Spin/400/800/1000/1200
Wa er consump ion : 113ℓ(10.3ℓ/kg)
Permissible wa er pressure : 0.3 - 10kgf/cm2(30~1000kPa)
❋The appearance and specifica ions may be varied wi hou no ice o improve he
uni s quali y.
Inle hose(1EA) Spanner
 Accessories

6
nstallation
I
1. To preven in ernal damage during
ranspor , he special 4 bol s are locked.
Before opera ing he washer, remove
he bol s along wi h he rubber bungs.
• If hey are no removed, i may cause heavy
vibra ion, noise and malfunc ion.
3. Take ou he 4 bol s along wi h he rubber
bungs by sligh ly wis ing he bung. Keep
he 4 bol s and he spanner for fu ure use.
• Whenever he appliance is ranspor ed, he
ransi bol s mus be refi ed.
The appliance is fi ed wi h ransi bol s o preven in ernal damage during ranspor .
• Packing and all transit bolts must be
removed before using the washer.
󳢹When unpacking the base, be sure
to remove the additional packing
support in the middle of the base
packing.
2. Unscrew he 4 bol s wi h
he spanner supplied.
4. Close he holes wi h he caps supplied.
 Transit bolts
Install or store where it will not be exposed to temperat res below freezing or exposed to the
weather.
Properly gro nd washer to conform with all governing codes and ordinances.
The base opening m st not be obstr cted by carpeting when the washing machine is installed on a
carpeted floor.
In co ntries where there are areas which may be s bject to infestation by cockroaches or other
vermin, pay partic lar attention to keeping the appliance and its s rro ndings in clean condition at
all times.
Any damage which may be ca se by cockroaches or other vermin will not be covered by the
appliance g arantee.
 Removing transit bolts
Base Packing
Washer
Packing Suppor

7
nstallation
I
Level loor :
Allowable slope under en ire washer is 1°
Power outlet :
Mus be wi hin 1.5 me ers of ei her side of loca ion
of washer. Do no overload he ou le wi h more han
one appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear / 2cm : righ & lef side)
Do no place or s ore laundry produc s on op of
washer a any imes.
They can damage he finish or con rols.
 Installation place requirement
 Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
• Before placing the washer on tiles, apply a rubber mat under the feet.
• ever try to correct any unevenness in the floor with pieces of wood, cardboard or
similar materials under the washer.
• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning
stove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker or
stove,must be inserted between the two appliance.
• The washer must not be installed in rooms where the temperature can drop below 0°C.
• Please ensure that when the washer is installed, it is easily accessible for the engineer in
the event of a breakdown.
• With the washer installed adjust all four feet using the transit bolt spanner provided
ensuring the appliance is stable, and a clearance of approximately 20mm is left between
the top of the washer and the underside of the work-top.
Washer
approx.
2cm
Drain Hose
Laundry
Tub

8
nstallation
I
▶ Water supply pressure must be between
30kPa and 1000kPa
(0.3~10kgf/cm2)
▶ D n’t strip r cr ssthread when c nnecting Inlet h se t the valve.
▶ If the water supply pressure is m re than 1MPa, a dec mpressi n
device sh uld be installed.
• Two rubber seals are supplied wi h he wa er inle hoses hese
are in order o preven wa er leaks.
• Check wa er igh ness of washing machine connec ions by
urning he ap comple ely on.
• Periodically check he condi ion of he hose and replace he
hose if necessary.
• Make sure ha here is no kink on he hose and ha i is no
crushed.
▶ When y ur washer has tw valves,
• The Inle hose which has red connec or is for he ho wa er ap.
• If he washer has wo valves, he energy is saved by using ho
valve.
 Washing Machine is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
 Connecting water supply hose
1. Do no use an ex ension cord or double adap er.
2. If he supply cord is damaged, i mus be replaced by he manufac urer or i s service agen s or
similarly qualified person in order o avoid a hazard.
3. Always unplug he machine and urn off he wa er supply af er use.
4. Connec he machine o an ear hed socke in accordance wi h curren wiring regula ions.
5. The appliance mus be posi ioned so ha he plug is easily accessible.
• Repairs o he washing machine mus only be carried ou qualified personnel. Repairs carried ou by
inexperienced persons may cause injury or serious malfunc ioning. Con ac your local service cen er
• Do no ins all your washing machine in rooms where empera ures below freezing may occur. Frozen hoses
may burs under pressure. The reliabili y of he elec ronic con rol uni may be impaired a empera ures below
freezing poin .
• If he appliance is delivered in he win er mon hs and empera ures are below freezing : S ore he washing
machine a room empera ure for a few hours before pu ing i in o opera ion.
 Electrical connection
CAUTION concerning the Power Cord
Mos appliances recommend hey be placed upon a dedica ed circui ; ha is, a single ou le circui
which powers only ha appliance and has no addi ional ou le s or branch circui s. Check he
specifica ion page of his owner's manual o be cer ain.
Do no overload wall ou le s. Overloaded wall ou le s, loose or damaged wall ou le s, ex ension cords,
frayed power cords, or damaged or cracked wire insula ion are dangerous. Any of hese condi ions
could resul in elec ric shock or fire. Periodically examine he cord of your appliance, and if i s
appearance indica es damage or de eriora ion, unplug i , discon inue use of he appliance, and have
he cord replaced wi h an exac replacemen par by an au horized servicer.
Pro ec he power cord from physical or mechanical abuse, such as being wis ed, kinked, pinched,
closed in a door, or walked upon. Pay par icular a en ion o plugs, wall ou le s, and he poin where
he cord exi s he appliance.
CAUTION

9
nstallation
I
 Normal Tap without thread & screw type inlet hose
 Normal Tap without thread & one touch type inlet hose
1.Unscrew he fixing screw o
a ach he ap.
2.Push he connec or up ill he
rubber packing is in igh con ac
wi h he ap. Then igh en he 4
screws.
3.Push he wa er supply hose
ver ically upwards so ha he
rubber packing wi hin in he
hose can adhere comple ely o
he ap and hen igh en i by
screwing i o he righ .
1.Un igh en he upper connec or
screw.
2.Push he upper connec or up ill
he rubber packing is in igh
con ac wi h he ap. Then
igh en he 4 screws.
3. Connec he wa er supply hose
o he middle connec or,
pushing he pla e down.
• Your machine comes wi h only
cold wa er connec ion.
• Make sure ha here are no
kinks in he hose and ha i is
no crushed.
• Make sure ha he rubber seal
is inside he hose connec or.
Upper
Connec or Rubber
packing
Middle
connec or
Fixing screw
Guide pla e
Connec or
Rubber seal
Hose connec or
Used the horizontal tap
Horizon al ap
Ex ension ap
Square ap
Rubber packing
Upper
Connec or
Middle
connec or
Pla e
Upper
Connec or
Wa er supply
hose
• In case he diame er of he ap is
large remove he guide pla e.
• Turn he middle connec or no
o have wa er leaked.
• To separa e he wa er supply
hose from he middle connec or
shu off he ap. Then pull he
inle hose down, pushing he
pla e down.

10
nstallation
I
 Installation of drain hose
max. 100cm
min. 60cm
Hose
Re ainer
Laundry ub
Tie
s rap
max. 100cm
min. 60cm
• The drain hose end should no be placed higher
han 100 cm above he floor.
• Proper securing of he drain hose will pro ec he
floor from damage due o wa er leakage.
• When he drain hose is oo long, do no force
back in o he washer. This will cause abnormal
noise, malfunc ion, and wa er leakage.
• When ins alling he drain hose o a sink,
secure i igh ly wi h a s ring.
• Proper securing of he drain hose will
pro ec he floor from damage due o
wa er leakage should he drain hose
become loose.
This equipmen is no designed for mari ime use or for use mobile ins alla ions such as
caravans, aircraf e c.
Turn off he s opcock if he machine is o be lef for any leng h of ime (e.g. holiday),
especially if here is no floor drain(gully) in he immedia e vicini y.
When disposing of he appliance, cu off he mains cable, and des roy he Plug.
Disable he door lock o preven young children being rapped inside.
Packaging ma erial (e.g. Films, S yrofoam) can be dangerous for children. There is a risk
of suffoca ion ! Keep all packaging well away from children
max. 100 cm
min. 60 cm
abou 105 cm
abou 145 cm
abou 100 cm
max. 100 cm
abou 105 cm
abou 145 cm
abou 100 cm
min. 60 cm

11
nstallation
I
Concrete floors
Wooden floors (Suspended floors)
• The ins alla ion surface mus be clean, dry and level.
• Ins all washer on a fla hard floor.
Tile floors (Slippery floors)
• Posi ion each foo on he Tread Ma e and level he machine o sui . (Cu Tread Ma e in o 70x70 mm
sec ions and s ick he pieces on o he dry ile where machine is o be placed.)
※※
Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
• Wooden floors are par icularly suscep ible o vibra ion.
• To preven vibra ion we recommend you place rubber cups under each foo ,
a leas 15mm hick under he washer, secured o a leas 2 floor beams wi h
screws.
• If possible ins all he washer in one of he corners of he room, where he floor is more s able.
※※
Insert the rubber cups to reduce vibration.
※※
Rubber cups ( p/no. 4620ER4002B ) can be purchased from the L spare parts department.
Important!
• Proper placemen and levelling of he washer ensures long, regular and reliable opera ion.
• The washer mus be absolu ely horizon al and s and firmly in posi ion.
• I mus no “Seesaw” across corners under load.
• The ins alla ion surface mus be clean, free from floor wax and o her lubrican coa ings.
• Do no le he fee of he washer ge we . If fee of he washer ge we , slipping may occur.
Rubber Cup
※
It can be purchased from
hardware suppliers.
 Level adjustment
1. Adjus ing he washing machine level properly preven s excessive
noise and vibra ion.
Ins all he appliance on a solid and level floor surface, preferably in
a corner of he room.
2. If he floor is uneven, adjus he adjus able fee as required. (do
no inser pieces of wood e c. under he fee )
Make sure ha all four fee are s able and res ing on he floor and
hen check ha he appliance is perfec ly level. (use a spiri level)
※※
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
❊ Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the
machine should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
NOTE
Timber or suspended type flooring may contribute to
excessive vibration and unblance errors.
NOTE
In the case that the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.

12
are before washing
C
1. Care Labels
Look for a care label on your clo hes. This will ell you abou he fabric con en of your garmen and
how i should be washed.
2. Sorting
To ge he bes resul s, Sor clo hes in o loads ha can be washed wi h he same wash cycle.
Wa er empera ure and spin speed and differen fabrics need o be washed in differen ways.
Always sor dark colors from pale colors and whi es. Wash separa ely as dye and lin ransfer can
occur causing discolora ion of whi e e c. If possible, do no wash heavily soiled i ems wi h ligh ly
soiled one.
Soil (Heavy, Normal, Ligh ) Separa e clo hes according o amoun of soil.
Color (Whi e, Ligh s, Darks) Separa e whi e fabrics from colored fabrics.
Lin (Lin producers, Collec ors) Wash lin producers and lin collec ors
separa ely.
3. Caring before loading
 Caring before washing
 Before the first washing
 Combine large and small items in a load. Load large items first. Large items sho ld not be more than half
the total wash load.
Do not wash single items. This may ca se an o t-of-balance load. Add one or two similar items.
• Check all pocke s o make sure ha hey
are emp y. I ems such as nails, hair clip,
ma ches, pens, coins and keys can damage
bo h your washer and your clo hes.
• Close zippers, hooks and s rings o
make sure ha hese i ems don’
snag on o her clo hes.
• Pre rea dir and s ains by brushing a li le
de ergen dissolved in wa er on o s ains like
collars and cuffs o help shif dir .
• Check he folds of he flexible gaske (gray) and
remove any small ar icles,if any.
• Check inside of he drum and remove any lef
i ems in i for nex wash cycle.
• Remove any clo hing or i ems on he flexible
gaske o preven clo hing and he gaske
damages.
Selec a cycle (COTTON 60°C, add a half load of de ergen ) allow he uni o wash
wi hou clo hing. This will remove residues and wa er from he drum ha may have been lef
during manufac uring.

13
dding detergent
A
• Main wash only ➔
• Pre Wash + Main Wash ➔
• Do no exceed he maximum fill line.
Close he dispenser drawer slowly.
Overfilling can cause early dispensing
of he fabric sof ener which could s ain
clo hes.
• Do no leave he fabric sof ener in he
de ergen drawer for more han 2 days.
(Fabric sof ener could harden)
• Sof ener will au oma ically be added
during he las rinse cycle.
• Do no open he drawer when wa er is
supplied.
• Solven s(benzene, e c) are no
allowable.
1. The Dispenser Drawer
2. Adding Fabric Softener
 Adding detergent and fabric softener
Do not pour fabric softener
directly on the cloths
NOTE
( )
( )
( )
( )
( )

dding detergent
A
14
• The detergent sh uld be used acc rding t the
instructi n f the detergent manufacture.
• If t much detergent is used, t many suds
can ccur and this will decrease the washing
result r cause heavy l ad t the m t r.
• Use p wder detergent nly f r the fr nt
l ading washer.
❇ If suds ccur t much, pleas reduce the
detergent am unt.
• De ergen usage may need o be adjus ed
for wa er empera ure, wa er hardness,
size and soil level of he load. For bes
resul s, avoid oversudsing.
4. Water softener
• A wa er sof ener, such as An i limescale
(Clagon) can be used o cu down on he
use of de ergen in ex remely hard wa er
areas. Dispense according o he amoun
specified on he packaging.
Firs add de ergen and hen he wa er
sof ener.
• Use he quan i y of de ergen as for sof
wa er.
❋ Tips
Full load : according to
manu acturer’s recommendation.
Part load : 3/4 o the normal
amount.
Minimum load : 1/2 o ull load.
• De ergen is flushed from he dispenser
a he beginning of he cycle.
1) Open he door and Table s in o he
drum.
3. Detergent dosage
5. Using the Tablets
2) Load he laundry in o he drum.
3) Close he door.

15
unction
F
 Recommended courses according to the laundry type
❋ Water Temperature : Selec he wa er empera ure o he wash cycles.
Always follow garmen manufac ure’s care label or ins ruc ions
when laundering.
❋ Intensive : When washing full load or heavily soiled laundry, you can increase
effec iveness by choosing in ensive op ion.
❋ Pre Wash : If he laundry is heavily soiled, “Pre Wash” op ion is recommended.
Pre Wash is available in Co on, Syn he ic , Co on Quick and Baby Care
Program.
Cotton
Synthetic
Baby Care
Allergy Care
Re resh
Delicate
Hand Wash
/Wool
Quick 30
Cotton
Quick
Color fas garmen s
(shir s, nigh dresses,
pajamas...)and ligh ly soiled whi e
co on (underwear...)
- Pre Wash
- Rinse+Spin
- Less S eam
- Eco S eam
- Turbo S eam
- In ensive
- Turbo S eam
- In ensive
- Rinse+Spin
- In ensive
- Turbo S eam
- Rinse+Spin
- In ensive
- Pre Wash
- Rinse+Spin
- Less S eam
- Eco S eam
- Turbo S eam
- In ensive
Polyamide, Acrylic,
Polyes er.
Delica e laundry easily
damaged.
For clean wash hrough
elimina e allergy source.
“Hand Wash” marked laundry
or machine washable woolens.
Colored Landry which is
ligh ely soiled fas .
Co on Which is ligh ly
soiled.
60˚C
(Cold,
30˚C, 40˚C,
95˚C)
40˚C (Cold,
30˚C, 60˚C)
60°C
40°C, 95°C)
–
–
40˚C
(Cold, 30˚C)
30°C
(Cold,40˚C)
30˚C
(Cold, 40˚C)
40˚C
(Cold, 30˚C)
Ra ing
5.0kg
6.0kg
5.0kg
5 i ems
4.0kg
3.0kg
5.0kg
Ra ing
Maximum
Load
Additional
Option
Proper
Temp.
(Option)
Fabric Type
Program
Ligh ly soiled baby wear
Co on mixed, Polye er mixed
Dress shir s, blouses (I jus makes
wrinkled clo hes easy o iron)

16
ow to use washer
H
• Press he Power( ) bu on o s ar .
• Press he Start/Pause( ) bu on.
• Ini ial condi ion
- Rinse : 3 times
- Water temperature : 60°C
- Spin : 1200 rpm
- Program : Cotton
• Press he Power( ) bu on o urn he
washer on.
• Selec he desired cycle wi h he
program dial and if required, make any
changes o he washing condi ions by
pressing he bu ons accordingly.
For selecting the each conditions, please
refer to the page17~page25
• Press he Start/Pause bu on o
commence he cycle.
1. Cotton automatically
selected upon power on.
2. Manual Selecting
20%
_ _ _ 1200rpm 60°CNormal
Washing
1:12
Time Left
3. Language Selection
• English is he defaul language.
Language can be changed only when
LCD is on. Power On and hen press
he Time delay and In ensive bu on
simul aneously for 3 seconds un il he
Selec a Language menu is displayed.
• Ro a ion of he program dial will cycle
hrough Spanish, Por uguese and hen
back o English.
Select a Language
English
Spanish
Portuguese

17
ow to use washer
H
Program
1. Power
2. Initial Program
Power
• Press he Power( ) bu on o urn
power on and off.
• To cancel he Time Delay func ion, he
Power( ) bu on mus be pressed.
• When he Power( ) bu on is pressed,
he washer is ready for Co on program.
And he o her ini ial condi ions as follows.
• So, if you wan o advance in o he
washing cycle wi hou changing he
program, jus press Start/Pause( )
bu on and hen he washer will proceed.
■ Initial program
- Cotton Program / Rinse:Normal / 60°C/
1200rpm
Cotton
Cotton Quick
Synthetic
Delicate
Hand Wash
/Wool
Quick 30
20%
_ _ _ 1200rpm 60°CNormal
Washing
1:12
Time Left
(1) (2) (3) (4) (5) (6) (7) (9)(8) (12) (13)(10) (11)
(1)Bu on: Power
(2)Dial: Program
(3)Bu on: S ar /Pause
(4)Bu on: Op ion
(5)Child lock
(6)Bu on: Rinse
(7)Bu on: Spin
(8)Tub Clean
(9)Bu on: Temp.
(10)Bu on: Time Delay
(11)Bu on: In ensive
(12)Bu on: Turbo S eam
(13)Dial: Dry
• 9 programs are available according o he
laundry ype.
• Dial lamp will ligh up o indica e selec ed
program.
• When Start/Pause( ) bu on is pressed,
he Co on program is au oma ically
selec ed.
- By urning he Program dial, he program is
selec ed in order of “Co on – Co on Quick
– Syn he ic – Delica e – Hand Wash/Wool
– Quick 30 – Refresh – Allergy Care –
Baby Care”.
For information regarding laundry type for
each program, please refer to page 15.

18
ow to use washer
H
Option
• By pressing he op ion bu on, only one
op ion func ion may be selec ed.
NOTE:
Depending on he selec ed program cycle,
no all Op ions may be selec able.
1. Pre Wash
• Use his op ion for loads ha need
pre rea men . This adds 16 minu es of pre
washing before draining.
- When using Pre Wash op ion, do no use
a liquid de ergen for he main wash.
Use powder for he main wash.
• Available in Co on, Syn he ic, Baby Care
and Co on Quick.
2. Rinse + Spin
• Use his op ion o rinse and hen spin
3. Less Steam
• When you wan o do a s eam wash for
only a small amoun of laundry, selec he
his op on.
4. Eco Steam
• When you wan o do a s eam wash o
reduce he elec rici y consump ion, selec
his op on.
1200rpmNormal
Pre Wash
Rinse + Spin
Less Steam
Eco Steam
Less
Steam
_ _ _
Start/Pause
• This Start/Pause bu on is used o s ar
wash cycle or pause he wash cycle.
• If emporary s op of wash cycle is needed,
press “Start/Pause” bu on.
• When in Pause, he power is urned off
au oma ically af er 4 minu es.
1. Start
2. Pause
Door Lock
• Ligh s whenever he door of he washer is
locked.
• The door can be unlocked af er a 2~3
minu e delay, pressing he S ar /Pause
bu on o s op he washer.
20%
_ _ _ 1200rpm 60°CNormal
Washing
1:12
Time Left

19
ow to use washer
H
1. Normal
2. Rinse+& Medic Rinse
3. Rinse Hold
Rinse
• By pressing he Rinse bu on, he Rinse
ype can be selec ed.
- Normal
- Rinse+
- Medic Rinse
- Normal+Hold
- Rinse++Hold
• Cotton (for full load), Synthetic, Allergy Care,
Cotton Quick, Baby Care performs 3 Rinses
• Cotton (for part load), Delicate, Hand
Wash/Wool, Quick 30 performs 2 Rinses.
• Used o addi ional rinse, which may assis
in removing races of de ergen residue.
• By selec ing Rinse+or Medic Rinse
func ion, he Rinse Time and he Rinse
wa er are increased.
• Medic Rinse hea s he wa er o 40 Deg in
he las rinse.
• Is selec ed by pressing he Rinse bu on
repea edly his func ion leaves clo hes in he
washer; suspended in he wa er af er a rinse
wi hou en ering in o spin.
• To proceed o a Drain or Spin func ion af er
a Rinse hold, press he Spin bu on for he
desired speed, hen press he S ar /Pause
bu on.
The matching indicator lamp will light up for
identification.
Child lock
If you choose o lock he bu ons on he
con rol assembly o preven ampering, his
func ion may be selec ed.
• Child lock can be se by pressing and
holding he Option and Rinse bu on
simul aneously. (Abou hree seconds)
• To deac iva e Child lock sys em, press
and hold he
Option and Rinse bu on
simul aneously again.
(Abou hree seconds)
• To change o he desired program, whils in
child lock mode.
1. Press and hold bo h
Option and Rinse
bu on o cancel he child lock.
(Abou hree seconds)
2. Press he Start/Pause bu on.
3. Selec he desired program and press he
Start/Pause bu on again.
• The child lock can be se a any ime and i
can be deac iva ed only by using child-lock
cancel process. Turning he power off and
opera ional errors will no affec child-lock.
_ _ _ 1200rpm 60°CNormal
Child lock is on.
1:12
20%
Time Left
_ _ _ 1200rpm 60°CNormal
Child lock is off.
20%
1:12
Time Left
Change
he desired
program
1200rpm
Rinse+ + Hold
Normal + Hold
Medic Rinse
Rinse+
Normal
Less
Steam Medic
Rinse
_ _ _

20
ow to use washer
H
1. Spin selection
Spin
• Spin speed is available according o he
program as follows.
- Cotton & Cotton Quick & Quick30
No Spin – 400 – 800 – 1000 – 1200
- Allergy Care & Baby Care & Synthetic
& Hand Wash/Wool
No Spin – 400 – 800 – 1000
- Delicate
No Spin – 400 – 800
• By pressing he Spin bu on, he spin
speed can be chosen.
2. No spin
• If “No Spin” is selec ed, he washer s ops
af er draining he wa er from he las spin.
The matching indicator lamp will light up for
identification.
Water Temperature
• By pressing he Temp. bu on, he
wa er empera ure can be selec ed.
- Cold
- 30˚C / 40˚C / 60˚C / 95˚C
• Wa er empera ure can be selec ed as
below according o he program.
- Cotton
Cold – 30°C – 40°C – 60°C – 95°C
- Synthetic
Cold – 30°C – 40°C – 60°C
- Cotton Quick & Delicate &
Hand Wash/Wool & Quick30
Cold – 30˚C – 40˚C
- Baby Care
40°C – 60°C – 95°C
The required temperature lamp will light up
for identification.
For the more detailed information, please
refer to the page15.
1200rpm
1000rpm
800rpm
400rpm
No spin
Less
Steam Medic
Rinse
400rpm _ _ _ 1200rpm
95°C
60°C
40°C
30°C
Cold
Normal
40°C
_ _ _