li'l pengyu Baby Bassinet BC218 User manual

Baby Bassinet
at [e-mail]
188 Grand Street Unit #143
New York, NY 10013
APSIS COMMERCE LLC

Baby Bassinet
1
Dear Li'l Pengyu customer,
Thank you for choosing our products!
All of our products are crafted with great attention to detail. We really appreciate
your trust and hope you'll be satisfied with your order. We are devoted to
answering your questions and listening to your feedback – please feel free to
contact us anytime at: [e-mail].
Your support means a lot to us! Li'l Pengyu will continuously strive to bring high-
quality products and serve our customers better.
Li'l Pengyu team

This bedside sleeper is designed for use only with adult beds that are between 16.5 and 24
inches from the floor to the top of adult mattresses.
A bedside sleeper is designed to provide a sleeping area for an infant until he or she begins
to push up on hands and knees or at approximately 5 months of age. Move your baby to another
sleeping product when your baby reaches this stage.
Entrapment Hazard--To prevent death from entrapment, the bedside sleeper must use the included
straps to anchor bedside sleeper to adult bed.
(1) There must be no more than a 0.5inch (13mm) gap between the bedside sleeper and the adult bed.
(2) Check tightness before each use by pulling the bedside sleeper in a direction away from the adult bed.
(3) If gap exceeds 0.5inch (13mm) , DO NOT use the product.
Do not fill the gap with pillows, blankets or other items.
Carefully read and follow the assembly instructions for bedside sleeper and crib use modes.
Check instruction manual for a list of required parts. Periodically check whether any part is
damaged or missing. Straps must be used in the bedside sleeper mode.
adjustment Steps
Bedside Opening Steps
S
Crib Height Guide
Care And Maintenance
BedRailInstallation
Baby Bassinet
Functional Units
Installation Steps
32

Wheel
Height
adjustment
button
1
2
3
31
2
Unpacking steps
Open the box
Take out the components, including: bed rail, bed frame,
bottom support, transverse tube, fool tubes and straps.
Height-adjustment steps
As shown in the figure below: There are height
adjustment buttons on both sides of the bassinet. Please
adjust the height of one side first and then adjust the
height of the other side.
Holding the edge of the bassinet in one hand
Press the adjustment button with the other hand
to adjust to the appropriate height
Follow the same steps to adjust the other side
Transverse
tubex1
Strapx2
Foot tube x 2
54
Indicator of
7 adjustable
heights

Firststep:Foottubeinstallation
Secondstep:Transversetubeinstallation
Thirdstep:Bottomsupportinstallation
Heightadjustmenttube
Foottube
Slot
1
1
1
1
1
2
1
2
3
2
2
3
and push down the height
adjustment tube for fixation
After instaling the
foot tube on one side,
follow the same steps
on the other side.
Insert the two ends of the bottom support into the slots inside the foot tube.
Make sure the two ends are fully inserted to the bottom.
First, turn the height
adjustment tube on one side
into a 90 degree angle, as
shown in the figure.
Insert the height
adjustment tube into the
foot tube.
There is a marble in the
foot tube. Press the marble
Bedrail
Velcro
Side
buckle
1
4
3
2
2
3
4
1
Place the bed rail in the bed frame.
Make sure that the side of the bed rail
with “LI’L PENGYU” logo is on the same
side as the side buckles.
Zip up around the bed rail
Buckle the protection cloth
cover of the side buckles.
Tighten the velcros at the bottom
Congratulations! The bassinet
installation (crib mode ) is
now completed.
76

4
3
3
2
1
1
2
3
4
Bedside opening steps
Push upwards to
separate the top border
Unbuckle the side buckles on both sides
and zip down
Flip the side opening down and
connect its buckles to the ones under
the bed rail
Push the buttons under the tube
7
6
5
1 2
3
4
6
4
3
5
1 2
7
7
the four wheels
Bedside sleepers shall never be used in an inclined position;
There shall never be a gap between the lower side of the
bedside sleeper and the mattress of the adult bed;
Check the tightness of the attachment system before each
use by pulling the bedside sleeper in a direction away from the
adult bed;
If there is any gap between the bedside sleeper and the adult
bed.DO NOT use the product.
Gaps should not be filled with pillows, blankets or other items.
The user shall not use other straps;
To prevent a suffocation hazard from entrapment, the bedside
sleep e shall be properly secured to the adult bed using
the straps
98

Users and guardians should read this instruction carefully before using the product and keep the manual for
future reference. The baby’s safety maybe affected if instructions are not followed correctly.
Be alert to the danger of fire or other strong heat sources near the crib (such as sparks, gas flame and so on) .
Please check the crib regularly to see if any accessories need to be replaced. Please feel free to ask the
customer care team for help. Do not use irregular replacement parts.
Please lock the crib in a fixed position when the baby is unattended.
Don't let the baby use the crib alone when the baby can sit up, kneel or climb.
Do not use this item anymore if the crib is loose or damaged.
Be sure to use the crib on a horizontal floor and make sure the baby is attended.
Please keep the crib far away from the window to prevent the potential hazard of a curtain.
Please keep the plastic cover away from the baby to avoid asphyxia.
The thickness of the selected sleeping pad ensures that when the sleeping surface is in the highest position,
the vertical height between the crib tube and the sleeping surface is at least 7.85 in.
The maximum load-bearing of the crib is 20lb.
Suitable age: 0-5months.
Assemble the product according to the manufacturer's instructions for both the bedside sleeper mode and
the crib mode.
To avoid death from the infant's neck being caught on the top rail, the top rail must not be higher than
the adult bed mattress, on the side that is next to the adult bed.
If a sheet is used with the pad, please use one that fits the dimension of the crib. 1110

To avoid the hazard of the baby's neck being
caught on the top rail on the side that is next
to the adult bed, the top rail must not be
higher than the adult bed mattress.
To avoid the risk of the baby being strangled,
the attachment system to the adult's bed shall
always be kept away from and outside of the crib.
After the crib is fixed firmly, the bottom support
of the adult bed should be flush against the bed frame.
1312