ORBELLE 314 User manual

1
MADE IN CHINA
SEE MORE PRODUCTS AT:
CONVERTIBLE CRIB
STYLE NO :#314
ORBELLE TRADE INC 347
CLINTON STREET HEMPSTEAD
N.Y.11550 516-481-1500
Read all instructions before assembling crib.
Carefully remove and lay out all parts.
Familiarize yourself with all diagrams to
facilitate the assembly of your crib.
Check parts and the enclosed hardware bag
with the hardware parts list to be sure all
are included and quantities are correct.
.
Failure to assemble the crib in the manner
recommended could make the crib hazardous.
Warning:Never use this product if there are any
loose or missing fasteners, loose joints,broken
parts, or torn mesh/fabric. check before
assembly and periodically during use.
Do not return to store,call ORBELLE for
replacement 516-481-1500 or email
[email protected]
.
ASSEMBLY INSTRUCTION
Read all insturctions before use of the changing
table.Save instructions for future use.
For the changing table,the maximum weight of
the child is 30lbs,any child over 30lbs, pls don’t
use .
Toddler bed
Day bed
Adult bed
MANUFACTURE DATE:OCT 2011
ALL DIAGRAMS ARE FOR ILLUSTRATION ONLY.
WWW.ORBELLE.COM

2
.Read all instructions before assembling crib, keep instructions for future use.
.Upon completion of assembly be sure all screws, bolts and fastening devices have been
securely tightened. A frequent check should be made.
.Infants can suffocate in gaps between a mattress too small or too thick and product sides , on
soft bedding never add a mattress, pillow,comforter,or padding.
.CAUTION:
Any mattress used in this crib must be at least 27-1/4inches(690mm) by 51-5/8
inches(1310mm),with a thickness not exceeding 6 inches(150mm), the
dimensions of the
be taken from seam to seam or edge to edge where
appropriate.
.Failure to follow these warnings and the instructions could result in serious injury
or death.
.Never use plastic shipping bag or other plastic film as mattress covers not sold and intended for
that purpose, they can cause suffocation .
.Strings can cause strangulation! Never place items with a string around a child’s neck,such
pacifier cords. Never suspend strings over product or
attach strings to toys.
.Never use this product if there are any loose or missing fasteners, loose joints,broken parts , or
torn mesh/fabric. check before assembly and periodically during use.
Contact ORBELLE for replacement parts and instructional literature if needed.
.Never substitute parts, the product including side rails, must be fully erected prior to use.
.Discontinue use of the product when child is able to climb out or reaches the height
of 35in.
.When child is able to pull to standing posi tion,set mattress/base to lowest adjustment position
and remove bumper pads, large toys ,and other objects that could serve as steps for climbing
out. A child can trap parts of the body or clothing on loose fasteners .
.Never use a water mattress with this product.
.If refinishing,use a non-toxic finish specified for children’s products.
.To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to
sleep, unless otherwise advised by your physician.
WARNING
.Never place product near window where cords from blinds or drapes can strangle
a child.
MADE IN CHINA
(900mm) .
mattress shall
as hood strings or
.Infants can suffocate on soft bedding .
.Never add a pillow or comforter .
.Never place additional padding under an infant .
.To help prevent strangulation tighten all fasteners .
.A child can trap parts of the body or clothing on loose fasteners .
.Follow warnings on all products in a crib .
See head panel & mattress support of the product for warnings.
Replace teething rail if damaged,cracked or loose.

3
e.Allen Wrench
1PC
a. 2-4/5”Allen head bolt
10PCS
A. Top Rail (2PCS)
B. Front Rail
Bottom (1PC)
CONNECTION HARDWARE
CRIB COMPONENTS
d.3/5”Allen head bolt
4 PCS
C. Back Rail
Bottom (1PC)
F. Left Back
Leg (1PC)
L. Right Crib Panel (1PC)
M. Metal Spring Support Platform (1PC)
G. Right Back
Leg (1PC)
H. Left front
Leg (1PC)
J. Right front
Leg (1PC)
f.Wood Dowel
2 PCS
E. The Stabilizer Bar (1PC)
K. Left Crib Panel (1PC)
b. 2”Allen head bolt
14PCS

STEP 1
STEP 2
G
Attach the right crib panel(L) to the
right front leg (J) and the right
back leg (G) by using allen head
bolts (a) . Then attach the left crib
panel (K) to the left front leg (H)
and the left back leg (F) by
using allen head bolts (a) .
Attach the Top rail
(A) and the back rail
bottom (C) to the left &
right back legs (F&G)
by using allen head
bolts (b).
Then attach the stabilizer
bar(E) to the left & right
crib panels(K&L) by using
allen head bolts (b) and
wood dowels (f).
a
a
e
a
a
a
J
L
b
b
b
b
b
F
G
A
C
e
E
L
K
b

5
STEP 3
d
M
F
H
J
G
Locate the metal spring (M) with tabs.
Be sure the smooth side of
metal spring (M) is faced
upward. Position the tabs
of metal spring (M) to mount
to the selected position onto
the legs. Inlert the bolts (d),
through the tabs and into
thread insets onto the legs,
then tighten securely with
Allen Wrench (e).
STEP 4
Attach the Top rail (A) and
the front rail bottom (B) to
the left & right front legs (H&J) by
using allen head bolts (b) .
H
J
B
d
d
b
b
b
b
b
b
A
e

6
CONVERT THE CRIB INTO TODDLER BED
1.Remove the top rail (A) and the front rail bottom (B).
3.Install the guard rail (D) as toddler bed by using allen head bolts(b) .
b
b
b
bD
J
H
WARNING !
·FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY
INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH
FROM ENTRAPMENT OR STRANGULATION.
·DO NOT PLACE BED NEAR WINDOW WHERE CORDS FROM BLINDS
OR DRAPES MAY STRANGLE A CHILD.
·DO NOT PLACE ITEMS WITH A STRING,CORD, OR RIBBON AROUND
A CHILD’S NECK,SUCH AS A HOOD,STRINGS OR PACIFIER CORDS.
·DO NOT SUSPEND STRINGS OVER A TODDLER BED FOR ANY
REASON.
·THE MATTRESS INTENDED FOR USE ON THE BED SHALL BE A
FULL-SIZE CRIB MATTRESS HAVING THE DIMENSIONS OF 51 5/8
IN.(1310MM) IN LENGTH AND 271/4IN.(690MM) IN WIDTH AND
THICKNESS OF 4 IN.(100MM) OR A GREATER THICKNESS AS
SPECIFIED BY THE MANUFACTURER.
·THE MINIMUM AGE OF THE INTENDED USER SHALL NOT BE LESS
THAN 15 MONTHS AND THE MAXIMUM WEIGHT SHALL NOT BE
GREATER THAN 50LBS (22.7KG).
FOR TODDLER BED USE
2.Install the mattress support to its lowest position.
TODDLER RAIL FOR CONVERTING TO TODDLER BED ARE NOT INCLUDED

7
Remove the top rail (A) and the front rail bottom (B) as shown.
Install the metal spring support platform (M) in its lowest position.
CONVERT THE CRIB INTO FULL SIZE BED
CONVERT THE CRIB INTO DAY BED
1.Remove the Metal Spring Support
Platform (M) .Then remove the crib
end (K&L) .
2.Use the front panel as foot board .
3.Use the rear panel as head board .
4.connect the front and rear panels
by a standard hollywood frame
provided by others.
(FRAME RAIL NOT INCLUDED TO CONVERT TO FULL
SIZE BED)
DO NOT RETURN TO STORE CALL OR EMAIL FOR REPLACEMENT
516-481-1500 or customerservice @ orbella.com