LianFeng DS-208Y-1 User manual

OFFICE & DESK CHAIR
MODEL NO (DS-208Y-1)
Please read and keep for future reference. Before returning this chair
to Amazon, contain TECHNICAL SUPPORT AND AFTER-SALE SERVICE
at

2
WARNING
If any parts are missing damaged or worn, stop using this chair.
Ensure all screws are securely fastened.Do not use this chair
place for future use. Failure to secure screws or allowing
screws to become loose may result in personal injury. This
Do not use it as a step ladder. Do not sit on the armrest of
the product. This chair is for one person use weighing
200 LBS (90KG) or less. The dual wheel casters can cause
result in serious injury. Carefully unpack all parts
Please examine all packing material before
discarding it.
IMPORTANT:
LIANFENG

A
B
C
D
E
F
G
J
K
L
M
4
1
Seat
Backrest
Base
ITEM DESCRIPTION QUANTITY
Casters
Mechanism
Cylinder
Cylinder
Backrest
Base
Seat
Caster (x5)
Armrests (x2)
Armrests
Mechanism
Screws Screws Hex key (M5)
Hex key (M5)
O1
Hex key (M4)
1PC
Hex key (M4)
1PC
M6*30MM
Screws （M6*30MM)
M6*20MM
M6*15*1MM
10
Screws （M6*20MM)
N1Screws （M6*25MM)
10
1
2
1
1
1
5
1
B1 Base leg 1
A
J
NO
KLM
DEFG
C
BBase leg
B1
3
Washers
Washers （M6*15*1MM)
10PCS
Screws
M6*25MM
1PC
4PCS
10PCS
A
B
C
E
F
G
D

ASSEMBLY
Step 2
Step 1
4
•Insert the base leg (B1) into the base (B) as shown.
•Using the screws (N) and hex key (O) tighten the base leg
(B1) to the base(B) as shown.
• Press the casters(A) into the hole of the base (B) as shown.
• Insert the cylinder(C) into the base(B) as shown.
LIANFENG
B
B1
N
O
N
O
Screws
M6*25MM
Hex key
(M4)
X1
X1
A
B
C

K
J
M
Hex key
(M5)
Screws
M6*30MM
X4
X4
X1
M6*15*1MM
Washers
•Using the screws(J) and washers(K) tighten the seat (E) to the
backrest(G) with hex key(M).
E
G
M
J
K
5
Step 3
Step 4
ASSEMBLY
K
J
M
Hex key
(M5)
Screws
M6*30MM
X4
X4
M6*15*1MM
Washers
• Using the screws( ) and ghten the armrest(F)
to the seat(E) with hex key(M) as shown.
F
E
M
J
K
L R

K
J
M
Hex key
(M5)
Screws
M6*30MM
X2
X2
M6*15*1MM
Washers
to the backrest (G) with hex key(M) as shown.
F
G
K
J
M
• Using the screws( ) and washers (K) ghten the armrest(F)
6
ASSEMBLY
Step 5
Step 6
E
D
M
LL
M
Screws
M6*20MM
Hex key
(M5)
X4
X1
(D) to the seat (E) as shown.

7
ASSEMBLY
Step 7
C
• Align the central hole of mechanism(D) over the cylinder(C),
E
D

To Adjust the Seat Height
control handle
8
then pull up the control handle.
• To lower the seat, pull down the control handle while you’re seated.

Cleaning and maintenance
9
Care & Maintaince
• Periodically clean the seat cover using a vacuum
• Use a dry cloth to remove dirt.
• If required ,use a slightly damp cloth to clean soiled
areas ,then wipe dry with a dry cloth.
• Occasionally ,thoroughly wipe the frame with a
slightly damp cloth. Then dry the frame using a dry
cloth.
• Do not use strong cleaning agents or abrasives.
8.85kg/19.5lbs
Weight

10
Feedback
Thank you for your recent purchase of ourLIANFENG product .We hope
you will be pleased with both the product and service you received. If
not ,please give our helpful customer service team an opportunity to
improve your experience right away ;our team members are more
than happy to help .
Meanwhile ,we also welcome you to past a Product Review so that
others can benefit form your experience .As a growing business, we
and input .
To submit your review ,please follow the steps below :
①Log into your account on Amazon .com, click “Your Account “, and
then click “Your Orders”.
② Click on the specific LIANFENG product you purchased, and select
your experience more visible -it’s that easy !
We’re always looking for ways to improve ,so that thanks again for
your business,support ,and feedback.
Warm Regards.
LIANFENG Customer Support.