Libtor T270-A1 User manual

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 1 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
T260Sseries Router
user manual
Product Version
Page
V1.5
Product name: T270
Total:43
T270 series router
user manual
The manual is suitable for the following model :
Model
Product type
T270-A1
WCDMA/HSDPA/HSUPA/HSPA+/GSM/GPRS/EDGE router
T270-B1
CDMA/EVDO router
T270-DE1
TD-LTE/FDD-LTE/WCDMA
/TD-SCDMA/GSM/GPRS/EDGE router
T270-DE2
TD-LTE/FDD-LTE/WCDMA
/TD-SCDMA/WVD0/CDMA20001X/GSM router

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 2 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
Copyright owned and kept by Shenzhen Libtor Technology Co,Ltd (2008-2016).
Any Company and Individual mustn’t use and copy the part and complete content and
broadcast in any form without permission from company.
Trade mark declaration
Libtor and Other Libtor trademarks are owned and controlled by Shenzhen LIBTOR
Technology Co.ltd
The Trademark and Registered trademark mentioned above are owned by related
person.
Notice
Regarding to product version updating and the other reasons, this file’s content will
be updating based on research and development results .It is only used for instruction
unless otherwise stipulated .All declarations, information and suggestions included in
this files can’t make up with any forms of guarantee.

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 3 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
Content
Chapter 1: Product specification ……………………………………………….5
1.1 Product description …………………………………………………………..5
1.2 Connector description…………………………………………………………6
Chapter 2 Setting preparation…………………………………………………..9
2.1 connecting equipment………………………………………………………….9
2.1.1 Set computer ‘s IP address………………………………………………..9
2.1.2 Connection by WiFi ………………………………………………………9
2.1.3 Confirm computer connection with router ………………………………...9
2.2 router login ……………………………………………………………………10
2.2.1 login …………………………………………………………………………10
2.2.2 enter web setting …………………………………………………………….10
2.3 T270 storage function …………………………………………………………11
Chapter 3 Working mode ……………………………………………………….17
3.1.3Gwireless router mode ……………………………………………………….17
3.2 Wire connection standard router mode ………………………………………...18
3.2.1 Static internet connection mode …………………………………………….18
3.2.2 Dynamic internet connection way………………………………………….19
3.2.3 PPPoE internet connection way ……………………………………………19
3.3 Wireless AP+ Customer end bridge mode ……………………………………20
3.4 wireless AP+Customer end mode……………………………………………….23
Chapter 4 …………………………………………………………………………..23
4.1 Wireless safety ………………………………………………………………….24

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 4 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
4.1.1 Open system …………………………………………………………………..24
4.1.2 WPA …………………………………………………………………………..25
4.1.3 WPA-PSK …………………………………………………………………..26
4.1.4 WPA2-PSK ………………………………………………………………….27
4.1.5 WPAPSKWPA2PSK ……………………………………………………….27
Charpter5 System service …………………………………………………………28
5.1 Virtual service ………………………………………………………………….28
5.2 Serial Port ………………………………………………………………….......29
5.3 SMS service …………………………………………………………………....30
5.4 Web Ads Certification …………………………………………………….…...31
Charpter 6 Admin……………………………………………………………….…32
6.1 Equipment function …………………………………………………………..32
6.2 Software updating ………………………………………………………….….32
6.3 Default to factory value …………………………………………………….…33
6.4 Password management………………………………………………………...33
Supplement ……………………………………………………………………….34
T270 Serial Port manual sepcification ……………………………………………35
T270 as customer end and realize serial data transmission………………………..36
T270 is used as server and realize remote data transsimission ……………………39
The use of T260S Virtual Server (port mapped)…………………………………..42

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 5 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
Chapter 1: Product specification
T270 industrial wireless router communication products which are based on 3G and
4G internet requirements and developed by Shenzhen LBITOR Technology co.ltd.
They are mainly applied for data transmission of industrial users and support for
transparent data transmission, picture transmission , equipment monitoring and
Wireless router internet functions.
T270 use 32 bit processor , it can process protocols and a large amount of data with
a high speed . It also can match with many types of industrial module for 3G /4G
internet .(3G:WCDMA/EVDO/TD-SCDMA, 4G:TD-LTE/FDD-LTE ) .Providing
10/100M ethernet network interface ,WIFI wireless connector ,serial port ,USB
connector for connecting many kinds of terminal equipments .
Supporting Web configuration, easy management and remote message control .
1.1 Product description

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 6 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
1.2 Connector description

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 7 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
Front side :
1:indicator ( details listed below)
3: USB connector (USB2.0&USB3.0)
4: Reset button
4:SIM/UIM card slot
Back side :
1: 3G/4G Antenna (3G/4G ATN1, 3G/4G/GPS ANT2)
2: WiFi Antenna (WIFI ANT1,WIFI ANT2)
3: UART connector: default type is R232 connector. You need to customized if you
need R485 connector.
4: LAN1/LAN2: RJ45 connector, LAN1 can be used as WAN port if LAN1 is in the
standard router mode.
5: DC connector: 2.1mm standard round-head connector and 5.08 connection line port
with self lock, Inner”+”.Outer:”-“，the Voltage Output is 6-35V，the power is larger
than 10W。
Indicator state specification
Name
State
Description
System
light(SYS)
Constant
light
Constant light when power supplied, It shows power supply
is normal.
Flash
slowly
The light state will change from constant light to flash
slowly which it takes about ten seconds when connect
electricity
Flash
quickly
1.The SYS light will flash quickly when it approach preset
cashflow value.
2.The SYS light will flash quickly when press reset button
for 5 seconds. Then system will restart later.
Connection
Internet light
(LINK)
Constant
light
Connection successful
Flash
slowly
Normal connection
Power
off
No connection

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 8 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
LAN1、LAN
2 light
Constant
light
Already connected RJ45 port
Power
off light
Disconnect RJ45 port
Power light
(power)
Constant
light
Power supply normal
Power
off
No power supply
WIFI light
Constant
light
Establish WIFi network successfully
Power
off light
Close WIFI network
USB light
Constant
light
It can be normal use when system detect storage aleady
Power
off light
System can’t detect storage
Reset button use method
SYS light (SYS) will be flashing quickly when long press RESET button for 5 seconds , the
system resets successfully when router restarting.
Serial port’s usage
T270 only open UART1 as standard RS232 serial port for external use . (The URAT
connector can’t be used for external use if T270 add GPS function.)
Power connector
T260S offer 2.1 mm standard circle hole and 5.08 selflocked connect line port poewr supply
way. The inner part of electrodes is positive pole and the outer part of electrodes is
negative pole .Power supply voltage ranged from 5to 35 voltage .We suggest using 12
voltage to supply power. The power suppy should be equal or larger than 10 W.
Antenna connector

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 9 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
T260S has four SMA antenna connectors . It responds to 3G/4G. WIFI antenna accordingly.
User can choose suitable outer shape and antenna automatically. The Bigger antenna gain ,
the more effecter of wireless sending and receiving in theory . We advise using 3 -5DB
antenna gain under 3G/4G antenna. WiFi antenna’s choice is based on the requirement of
user coverage .Our Product support 15DB antenna gain at the maximum .
Chapter 2 Setting preparation
2.1 connecting equipment
You can connect your computer and router as below procedure.
2.1.1 Set computer ‘s IP address.
Before access to the web setting, we advise you to setting your computer into obtain
IP address and DNS IP address automatically. Router can assign IP address
automatically. If you want to assign static IP address to the computer , you need to set
your computer and router of LAN port IP address into a same subnet .( The default
IP address is 192.168.10.1 for LAN port of router , Subnet mask is 255.255.255.0)
2.1.2 Connection by WiFi
Check your Wifi router’s wireless internet connection, then click“connection”
button to create connection, Wifi password :12345678
2.1.3 Confirm computer connection with router
Pls use Ping order to confirm if the computer connect with router or not when your
computer monitor successfully connected with IP.
For example :Proceed Ping order under Windows XP environment :Ping192.168.10.1

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 10 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
If LCD display as below, it means computer and router successfully connected.
2.2 router login
2.2.1 login
Then login Web setting configuration of router .
Click http://192.168.10.1 in the address field of web browser , then click the user
name and password in pop-up window
The defaulted user name is admin and password is admin when you login at the first
time to use .
2.2.2enter Web setting
Enter web setting when you successfully login , Then you can set and management
router .

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 11 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
2.3 T270 storage function ：
1: T270 has different kinds storage connectors:
USB connector,TF connector. USB connector can insert U disk, mobile hard
disk,solid state disk and so on , TF connector can insert TF storage card ( support 64G
storage function at the maximium)
2: Enter Web stteing -Status- Shared file , then it can check current storage
information .

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 12 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
3.Storage function usage : We can manange T270 storage medium by FTP
protocols,open run menu and then click ftp:\\192.168.10.1 or you also can click
ftp:\\192.168.10.1 in location under resource manager and press “Enter”key, It
can access to T270 storage medium.Here, We can add.delete,create different types of
files and the same way with management local hard disks.
4.Access to T270 storage medium by mobile phone, you can use the function of ES
files browser and other tools, setting methods as below:
(1) Open ES file browser

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 13 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
(2) Click the menu on the top-left, Choose FTP

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 14 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
(3)Click 192.168.10.1 in the server under pop-up web setting ,the user name and
password are admin,Click “confirm”

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 15 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
(4)It can access to T270 storage medium,here, We can add, delete,modify the
content of storage card .

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 16 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 17 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
Chapter 3 Working mode
T270 offer 4 types of working mode :3G wireless router mode (defaulted), standard
wireless router mode. Wireless AP+wireless customer end bridge mode ,wireless
AP+Wireless customer end mode
3.1, 3Gwireless router mode
The default to T270 is 3G wireless router, Insert 3GSIM card , Router will search
3G internet automatically .You can also define the internet supplier what you want to.

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 18 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
server
3G/4G
network
APN
Dial
number
User
name
password
China mobile
com
TD-
SCDMA
cmnet
*99#
或*98*1#
card
card
China Telecom
CDMA200
0
Null
#777
Card
card
China Unicom
WCDMA
3G/4Gne
t
*99#
Null
Null
In this mode, 2 RJ45 router connectors are LAN port
3.2 Wire connection standard router mode
3.2.1 Static internet connection mode

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 19 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
Entering working mode to choose standard router mode, Choose the static IP address
under WAN setting windows. Click IP address and net mask ,gateway and DNS
which ISP provided. Then apply it .
3.2.2 Dynamic internet connection way
Entering working mode to choose standard router mode, Choose the dynamic IP
address under WAN setting windows. Click apply button ,then the router will obtain
ISP assigned parameter automatically .

T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd Page 20 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: [phone]-807 Fax:[phone]-804
Mail:[email protected]
3.2.3 PPPoE internet connection way
Entering working mode to choose standard router mode, Choose the PPPoE under
WAN setting and fill the user name,password that ISP offer . Click apply button ,
3.3 Wireless AP+ Customer end bridge mode
Choose this mode ,we can use T270 as a bridge connection for AP using, it’s used
as bridge connection of former grade wireless router .
1.Set your computer’s IP address into 192.168.10.100, entering Web by wire
connect LAN2 connector, enter Web ,Choose wireless AP+ Customber end
bridge mode .