LifeSpan Kids KOKO User manual

KOKO TENT
OWNER'S MANUAL
IMPORTANT:
The owner’s manual contains safety, assembly, use and maintenance instructions .The product must be assembled by an adult who
has read and understood these instructions. Keep the packaging away from children and dispose of all packaging before use.
For the installer and your children’s safety, it is important to fully read and understand the instructions and safety hazards before
commencing the assembly of the product.
WARNING!
•Keep away from fire.
•The disassembled tepee
contains small parts
which pose a choking
hazard to children
under 3.

2
TABLE OF CONTENTS
1. GENERAL SAFETY INSTRUCTIONS 3
1.1. PURPOSE 3
1.2. RISK OF INJURIES 3
1.3. PRODUCT DAMAGE 3
1.4. ASSEMBLY ADVICE 3
2. PARTS 4
3. ASSEMBLY INSTRUCTIONS 5
4. WARRANTY 8

3
1. GENERAL SAFETY INSTRUCTIONS
1.1 PURPOSE
This product is intended for indoor, home, domestic use only. It is not suitable for commercial or medical
use.
1.2 RISK OF INJURIES
•Do not use the product if it is damaged or defective. If it is damaged or defective, please contact a
qualified technician.
•Check the product before each use. Defective parts must be changed immediately as they can
impair the function and the safety of the product.
•No more than one person to use the product at the same time.
•Use the product only on even and non-slip surfaces. Keep sufficient space around for safety.
1.3 PRODUCT DAMAGE
•Do not make alterations to the product. Only use original spare parts. Only qualified technicians
should carry out repairs –improper repairs can lead to danger for the user. Use this product only as
described in this manual.
1.4 ASSEMBLY ADVICE
•The assembly of the product must be done carefully and by an able-bodied adult. If in any doubt,
ask a technically qualified person.
•Before you start with the assembly, read the instructions carefully.
•Remove all packaging materials and lay down all parts on an open space. This gives you an
overview and simplifies the assembly procedure.
•Check with the parts list that all parts are available. Dispose of the packaging material when the
assembly is completed.
•Beware that when using tools or doing technical work, there is always a risk of injuries. Assemble
the product with care.

4
•Create a danger free environment; for example, do not let tools lay around the workspace. Store the
packaging material in a way that cannot cause any danger.
•After installing the product according to the instruction manual, ensure all screws, bolts and nuts are
correctly installed and tightened and that all joints are secure.
•Place the tent on a level surface at least 2 m from any structure or obstruction.
2. PARTS LIST
No.
Qty.
Image
A
4
B
3
C
6
D
1

5
3. ASSEMBLY INSTRUCTIONS
Step 1:
1. Attach 2x Part A and 2x B together with 4x Part C.
A
C
B
A
B

6
Step 2:
1. Slip 1x Part D into 1x Part B.
2. Connect the Part B through both Part A using 2x Part C.
B
D
C

7
Step 3:
1. Wrap the bottom of Part D around Part B rods and secure the sides of Part D onto Part A.

8
4. WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come
with guarantees that cannot be excluded under the Australian Consumer law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. Full details of your consumer rights may be found at
www.consumerlaw.gov.au
Please visit our website to view our full warranty terms and conditions:
http://www.lifespankids.com.au/Warranty-Policy-Kids
Please send all warranty and support inquiries through our ticketing system via the email address:
[e-mail].