LIFX Neon Flex Specification sheet

Download the
LIFX app to begin.
Get started

I'm not reading this whole thing
1 Turn on your LIFX light
2 Download and login to
the LIFX app
3 Press the + button to add
your product.
Technical Stu:
You'll need a device running iOS 14.0+ or Android
8.0+ and a 2.4 GHz Wi-Fi internet connection.
Not sure what that is? See the page ‘Your Wi-Fi’.
We get it—Don't worry, these are the basics...

Connect all the pieces
in this kit together
securely then plug it
into your power outlet.
Want install tips & videos?
Text here annoyingly small?
How do I turn it on?
Be safe! Make sure you read the
cautions notes.
S C A N F O R
SETUP VIDEOS,
INSPIRATION
PICS, DIGITAL
MANUALS &
MORE

Press the button
for 5 seconds. You
might do this if the
flex isn't lighting up
or counting pieces.
This puts it back
to original factory
settings.
Need to
reset?
Press the button on the
control in for 2-3 seconds.
A light will run down the full
length of the Neon Flex as it
detects it. If it was connected
before you plugged in the
controller, it will automatically
run this count.
Did you connect your
flex after powering
the control?

Cautions:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
• Do not mount or place near
gas or electric heaters,
fireplace, candles, or other
similar sources of heat.
• Do not secure the wiring
of the product with staples
or nails, or place on sharp
hooks or nails.
• Do not use this product for
other than its intended use.
• Do not hang ornaments or
other objects from the cord,
wire, or flex.
• Do not close doors or
windows on the product or
extension cords as this may
damage the wire insulation.
• Do not use with an extension
cord unless the plug can be
fully inserted. Do not alter or
replace the plug.
• This product should be
installed out of the reach of
children.
• Do not secure Neon Flex
using nails, staples or other
sharp, conducting materials
that could pierce the casing.
• DO NOT DAMAGE THE WIRE.
Warning: To avoid risk of
shock, always make sure the
product is unplugged from
the electrical outlet before
assembling, disassembling,
installing, relocating, extending,
servicing or cleaning it.

1 Power on your LIFX light
2 Open the Apple Home App
3 Use the camera on your iOS
device to scan the Homekit
QR code on the back of this
manual.
Open the Apple Home App and
click or “add accessory”.
Setting up using Apple Home™
on iOS?
Keep your user manual for the HomeKit
QR code in the future.
OR

With Apple HomeKit technology, you
can control your home’s lighting,
locks, and more from your iPhone®,
iPad®, HomePod mini®, Apple
Watch®, or Mac®.
Apple, Apple
Home, Apple
Watch, HomeKit,
HomePod,
HomePod mini,
iPad, iPad Air,
iPhone, and tvOS
are trademarks
of Apple Inc.,
registered in the
U.S. and other
countries and
regions.
Technical Requirements:
To control this HomeKit-enabled accessory, the
latest version of iOS or iPadOS is recommended.
An internet / data connection is required while
setting up Apple HomeKit as you will need to
connect your LIFX product to your Wi-Fi access
point / router. Controlling this HomeKit-enabled
accessory automatically and away from home
requires a HomePod, HomePod mini, or Apple
TV set up as a home hub. It is recommended
that you update to the latest software and
operating system.
Use of the Works with Apple badge means
that an accessory has been designed to work
specifically with the technology identified
in the badge and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards.

Your Wi-Fi:
LIFX lights connect to your 2.4 Ghz Wi-Fi
frequency network, which all routers can be set
up for. This oers better range and stability for
devices. You may also have a 5 Ghz connection,
so if you’re not sure which is which, check the
current Wi-Fi you’re connected to by pressing the
Wi-Fi icon on your phone while connected and
look at the listed details to find the frequency.
Connection troubles?
Wi-Fi waves can be interrupted by materials like
concrete or mirrors. If your signal is weak, try moving
your product near your router for setup as it will
need a stable connection to complete. If you have
lots of devices connected to your router, check the
recommended amount. Some routers can handle
many devices, others can only support a few.
802.11 b/g/nRouter WPA2 security compatible

Quick FAQS
How do I reset a light if I need to?
To take a light back to it’s original settings, turn it o
and on at the switch 5 times, at a rate of about one
switch a second (not too fast). The lights will cycle
through four colors and stop on white when the reset
has been successful. This is how you would remove a
light from a network to then add it to a new one.
I’ve set up a new network / changed my password,
how do I re-connect my lights ?
If you’ve changed your Wi-Fi password or set up a
new router with a new password, you’ll need to reset
your lights (as above) and reconnect them with the
new Wi-Fi information and security. If you’ve moved
house but your network is named the same and has
the same password, your lights are all ready to go!
Need more help?
Visit the LIFX Help Center at support.lifx.com

Regulations &
Compliance.
Changes & modification
Changes or modifications made to this
device may void certification of the
device. Changes or modifications made
to this unit not expressly approved by the
party responsible for compliance could
void the user‘s authority to operate the
equipment.
Frequency Information
Frequency Range (Europe & Australia):
2412-2472 MHz;
Maximum radio-frequency power
transmitted: 18.75 dBm;
Modulation type : IEEE 802.11 b/g/n20
Installation requirements
& recommendation
This device should only be installed in light
fittings and fixtures that are designed
to accept each fitting. Lamps, fittings
and fixtures that are designed to accept
smaller or lower wattage light bulbs
may result in the LIFX bulb operating
below its optimal capacity. For optimal
performance it is recommended that LIFX
bulbs be fitted into fixtures that provide
sucient air flow through and around
the bulb. It is recommended that the LIFX
bulb be installed away from other devices
designed to receive or transmit radio
signals. It is recommended LIFX bulb/s
be installed and operated at a minimum
distance of 30 cm from the body. For
lamps with a weight significantly higher
than that of lamps for which they are a
replacement, attention should be drawn
to the fact that the increased weight may
reduce the mechanical stability of certain
luminaires and may impair contact
making and lamp retention.
Interference
LIFX has been designed to minimise
interference with other radio, broadcast
or receiving devices. The manufacturer
is not responsible for any interference
caused as a result of modifications to
the product or by failure to adhere to
the recommendations in this document
and at support.lifx.com. This device
generates radio frequency energy and,
if not installed in accordance with the
“recommended installation requirements”
may cause harmful interference to
radio communication devices. If the
device is causing radio interference it is
recommended that the user try:
a. relocating the device to a dierent place;
b. adjust the antenna on the receiving
device;
c. consult a technician experienced in radio
interference.

Notices
• This device is not intended for use with
emergency exits
• Only use the control provided with or
specified by these instructions to control
this lamp. This lamp will not operate
properly when connected to a standard
(incandescent) dimmer or dimming
control.
LIFX is not designed for use in:
• Excessively hot environments (e.g. close
to ovens, radiators, heaters, etc.)
• Regions or countries other than that in
which the product was intended for
• Outdoor and wet areas, except where
the LIFX Product specifies that it is for
both Indoor and Outdoor use.
When using LIFX
• To avoid risk of shock, always make
sure the product is unplugged from
the electrical outlet before assembling,
disassembling, installing, relocating,
servicing or cleaning it.
• Do not open device, as this will void the
warranty
• If cleaning the product, use a soft dry
cloth, do not use cleaning agents
Limited Warranty
General
Feit Electric Co (“LIFX“) warrants the
LIFX bulb (the “Product“), and only the
Product, against defects in materials and
workmanship under normal use (“Defect”)
for a period of TWO YEARS (730 days)
from the date of retail purchase by the
original purchaser (“Warranty Period“).
Under this Limited Warranty, if a defect
arises and a valid claim is received by
LIFX within the Warranty Period, at its
option and to the extent permitted by
law, LIFX will either: 1. repair the Product
at no charge, using new or refurbished
replacement parts --or-- 2. exchange
the Product with a new or refurbished
Product.
In the event of a defect, to the extent
permitted by law, these are your sole
and exclusive remedies. A replacement
Product or part assumes the remaining
warranty of the original Product or
ninety (90) days from the date of
replacement or repair, whichever is
longer. When a Product or part of the
Product is exchanged, any replacement
item becomes your property and the
replaced item becomes LIFX‘s property.
Parts provided by LIFX in fulfilment of
its warranty obligation must be used in
Products for which warranty service is
claimed.
Exclusions & Limitations
This Limited Warranty applies only to
the Product manufactured by or for
LIFX that can be identified by the “LIFX
trademark, trade name, or logo axed
to it. The Limited Warranty does not apply

to any (a) LIFX products and services
other than the Product, (b) non- LIFX
hardware product, (c) consumables
(such as batteries), or (d) software, even
if packaged or sold with the Product or
embedded in the Product. Refer to the
licenses accompanying the software
for details of your rights with respect
to its use. LIFX does not warrant that
the operation of the Product will meet
your needs or requirements or be
uninterrupted or error free. LIFX is not
responsible for damage arising from
failure to follow instructions relating to the
Product‘s use or from failures resulting
from inadequate electrical supply or
internet access. This warranty does not
apply to a Product or part of the Product
that has been altered or modified (e.g. to
alter functionality or capability) by anyone
who is not a representative of LIFX or if
the Product is inserted or installed in a
casing not provided by LIFX. In addition,
this Limited Warranty does not apply to
Defects or damage caused by (a) use
with non-LIFX products; (b) accident,
abuse, misuse, flood, fire, earthquake
or other external causes or abnormal
conditions; (c) operating the product
outside the permitted or intended uses
or conditions described by LIFX or with
improper voltage or power supply; or
(d) service (including upgrades and
expansions) performed by anyone who
is not a representative of LIFX. Recovery
and reinstallation of software programs
and user data are not covered under this
Limited Warranty. This Limited Warranty
does not cover the cost of returning the
Product to LIFX; this is your responsibility.
No LIFX reseller, agent, or employee is
authorized to make any modification,
extension, or addition to this Limited
Warranty. If any term is held to be
illegal or unenforceable, the legality or
enforceability of the remaining terms shall
not be aected or impaired.
EXCLUSIVE WARRANTIES
THE WARRANTIES SET FORTH HEREIN ARE
THE EXCLUSIVE WARRANTIES PROVIDED
BY LIFX, AND EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ALL
OTHER WARRANTIES, WHETHER EXPRESS
OR IMPLIED WARRANTIES (INCLUDING
WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE
AND NON INFRINGEMENT) ARE HEREBY
EXCLUDED.
LIMITATION OF DAMAGES
EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, LIFX SHALL NOT BE
LIABLE FOR ANY INCIDENTAL, INDIRECT,
SPECIAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY USE OF THE
PRODUCT OR BREACH OF EXPRESS OR
IMPLIED WARRANTY OR CONDITION,
OR UNDER ANY OTHER LEGAL THEORY.
LIFX’S LIABILITY FOR DAMAGES
RESULTING FROM ANY USE OF THE

PRODUCT OR BREACH OF EXPRESS OR
IMPLIED WARRANTY OR CONDITION, OR
UNDER ANY OTHER LEGAL THEORY WILL
BE LIMITED TO THE ORIGINAL COST PAID
FOR OF THE DEFECTIVE PRODUCT.
Consumer Protection
Some states do not allow the exclusion or
limitation of incidental or consequential
damages, or allow limitations on how long
an implied warranty lasts, so the above
limitations or exclusions may not apply to
you. This warranty gives you specific legal
rights, and you may also have other rights
that vary by state to state.
Governing Law and Arbitration
This Limited Warranty shall be governed
by the laws of the State of California
without giving eect to any conflict
of laws principles that may provide
the application of the law of another
jurisdiction and without regard to
the Convention on Contracts for the
International Sale of Goods. Any claim
or dispute in connection with this Limited
Warranty shall be resolved in a cost
eective manner through binding non
appearance based arbitration. The
arbitration shall be initiated through an
established alternative dispute resolution
provider mutually agreed upon by the
parties. The alternative dispute resolution
provider and the parties must comply with
the following rules: a) the arbitration shall
be conducted by telephone, online and/
or be solely based on written submissions,
the specific manner shall be chosen by
the party initiating the arbitration; b) the
arbitration shall not involve any personal
appearance by the parties or witnesses
unless otherwise mutually agreed by the
parties; and c) any judgement on the
award rendered by the arbitrator may
be entered in any court of competent
jurisdiction. If the foregoing arbitration
clause does not apply for any reason,
you agree to submit to the personal
jurisdiction of the state courts located
within San Francisco County, California
and the federal courts in the Northern
District of California for the purpose of
litigating all such claims or disputes, which
courts shall have exclusive jurisdiction of
such claims or disputes. Notwithstanding
the foregoing, LIFX may seek injunctive
or other equitable relief to protect its
intellectual property rights in any court of
competent jurisdiction.

Australian Consumer Law
Our goods come with guarantees
that cannot be excluded under the
Australian Consumer Law. You are
entitled to a replacement or refund for
a major failure and compensation for
any other reasonably foreseeable loss
or damage. You are also entitled to
have the goods repaired or replaced
if the goods fail to be of acceptable
quality and the failure does not
amount to a major failure.
This product is distributed by:
Clever House Pty Ltd
For consumer inquiries please email
[e-mail]
visit www.cleverhouse.cc
FEIT ELECTRIC CO. is the
exclusive owner of rights and
interests in and to the mark
LIFX and the LIFX logo.
Covered by patents.
lifx.com/patents
© 2023
All rights reserved.
For more information visit lifx.com
Equipment :
This symbol on the product indicates
that this product shall not be treated
as household waste. Instead it shall be
sent to the applicable collection point for
the recycling of electronic equipment.
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health. For
more information about the recycling of
this product, please contact your local
city oce.

Chromaticity co-ordinates: coloured light
x < 0,270 or x > 0,530
y < – 2,3172 x2+ 2,3653 x – 0,2199
or y > – 2,3172 x2+ 2,3653 x – 0,1595
Product Details
Not suitable for use
under dust and moisture.
Reaches 100% brightness
in 1 second or less.
Minimum starting
temperature.
High quality LEDs rated
for 25,000 hours of use.
Connects to your routers
2.4GHz Wi-Fi band.

LIFX works diligently to ensure that LIFX products and their packaging materials
comply with all relevant regulations in the regions we supply. We will also provide
on request information regarding compliance if it is not immediately available
at the link below.
See lifx.com/compliance for notices for your region.
This is your
Apple HomeKit
QR code.