Light-Point DARK W1 User manual

A. Insert the lamp head into the lamp body
B. Connect the cable female and male connector.
A. Straighten the thread, insert it into the thread groove of
the slide block, and then attach the silicone pad.
B. Then insert the slider into the wall mount.
Open the box and identify the various lamp accessories.
A. Fix the wall mount on the wall and mark the drilling
points for the screws.
B. Drill into the marked drilling points using a Ø6mm drill bit.
C. Fix the installation colloidal particles in the installation hole
D. Useascrewdrivertoxtheatheadcrosstappingscrewsto
the wall.
Installthelampbody,plasticcover,wallmount,atgasket,spring
washers, cylindrical head hexagon screws, with 5mm spanner to
lock them successively.
Plug in the power, touch the center of the lamp holder to light up,
long press to adjust brightness.
The lamp has a memory function, meaning it can remember your
last light intensity when turned off and on again
1
Installation instructions
Lamp body: 1pcs Lamp head: 1pcs Plastic cover: 1pcs
Wall mount: 1pcs Sliding block: 1pcs
FLAT gasket: 1pcs
Plastic anchors: 4pcs
Screw: 1pcs
Screw: 4pcs Spanner: 8mm, 5mm
& 2mm
Spring washer: 1pcs
2
3030 3939
1818
3535
AB C D
3
654
Silicone pad

DARK W1
User Instructions
LIGHT-POINT.COM
DARK is quintessentially an example of the
maxim “form follows function”. Precision
workmanship, high-quality materials and
precisely worked details such as the seamlessly
integrated hinge design gives the collection its
elegance.
The tapered angles give the lamp a more
3-dimensional expression, which has over the
years become the iconic signature for LIGHT-
POINT products.
DARK
Collection
General use
· The product is designed for indoor use only.
· The lamp gets hot after prolonged use, therefore, do not cover the
product.
Cleaning instructions
·Before cleaning, ensure that the power supply is switched off.
·Wipe surface of lamp shade with a soft cloth.
·Do not use any abrasive cleaning tools such as steel wool, scouring
sponges or stiff brushes.
·Never use strong cleaning agents such as white spirit, household
glass cleaner or cellulose thinners.
Safety precautions
·The appliance should be installed, connected and tested by
qualiedelectricianandinaccordancewithlocalregulations.
·Turn off the power supply before installation or maintenance
of the lamp, and make sure that the cables are not squeezed or
damaged by sharp edges during installation.
·The lamp should not be covered by insulation blankets or similar
materials.
International warranty
Your product has gone through rigorous testing in order to live up to
the highest quality standards. It therefore carries a 7-year warranty
from the date of the original retail purchase receipt, covering defects
in materials and workmanship when used normally in accordance with
the published LIGHT-POINT guidelines.
These guidelines include but are not limited to information contained
in technical specications, safety instructions and quick start guides.
LIGHT-POINT is not responsible for damage arising from failure to
follow instructions relating to the use of the product.
LIGHT-POINT is a registered trademark of NORDIC LIVING GROUP.
For more information, please visit
LIGHT-POINT.COM