Lighthouse elite L/HEMINI200R User manual

Specifications
Rechargeable 200 Lumen
LED Mini Slimline Torch
Product code: L/H EMINI200R
1.5 hours
200 Lumens
COB LED
IP64
Water resistant
1M
Impact resistant
Battery
3.7v Polymer Li-ion 500mAh
Charge time
approx 2 hours
Brightness
Light source
Run time
30M
Beam distance
37g
Weight
Dimensions
USB charging lead
Supplied with
123 x 25 x 12mm
This versatile pocket inspection torch utilises
the latest technology in portable lighting,
allowing an extremely bright light to be
encased in a lightweight and slimline
compact unit.
The powerful 200 lumen COB LED features
three light settings:
• White light - Solid dimmable
• Red light - Solid
• Red light - Strobe
A strong magnet in the base enables the
torch to be fixed to metalwork. The cleverly
designed pocket clip allows for the torch to be
attached to clothing or a belt. A recess on the
rear enables fixing to a substrate via a screw.
An ideal companion for use in all trades and
around the home or car. The compact design
makes it an ideal leisure torch offering
minimal storage space and weight.
Battery Recharging
The torch must be fully charged for a
minimum of 2 hours before being used for
the first time, this will ensure that the battery
gives its best performance now and on future
re-charging cycles.
The charging cable is for recharging the
battery only. It cannot be used to directly
power the light.
Failure to recharge the light every 3 months
may permanently damage or reduce the
performance of the light. The battery charge
does not have to be fully depleted before
recharging.
Using the Charging Lead
Plug the USB charger lead into the micro
USB charging socket on the side of the torch.
Plug the other end of the lead into any USB
charging outlet.
While on charge the charging indicator lamp
will glow red and will turn blue when the
battery is fully charged (approximately
2 hours).
Please note the following
1) For best performance Li-ion batteries
should not be stored for prolonged periods
without being charged at regular intervals.
2) It is recommended to keep the battery in a
state-of-charge of 40-50 percent when
placing in storage. If in doubt, keep the
light in a higher charged state in a cool
place.
3) Self-discharge rate is approximately
10% per month.
148 x 210mm

Cleaning
Clean the light using a soft cloth
dampened with a soap and water solution.
Do not immerse or submerge the light in
water or any other fluid.
Maintenance
There are no serviceable parts inside this
light. Opening or visible attempts to repair
the light will void any guarantee.
LED bulbs should not wear out under
normal conditions and do not need to be
replaced.
Never attempt to open a battery,
as liquid may be ejected, if
accidental contact occurs flush
the affected area with water. If
the liquid comes into contact
with the eyes flush with water
and seek medical help. Liquid
ejected from batteries may cause
irritation or burns.
Li-ion batteries are formulated from
environmentally sensitive materials
and must be disposed of properly.
Please return these batteries to your
local recycling centre where they will
be recycled or disposed of properly.
Never attempt to incinerate
batteries as they may leak or
explode.
One-Year Home Use Limited Guarantee
Lighthouse guarantees this product to the
original purchaser for a period of ONE
YEAR against any defects in material or
workmanship but shall not cover damage
caused by misuse, abuse, alteration, or
accident. This product is intended for
home use only and the guarantee will not
cover products used for commercial
purposes.
Operating Instructions
The inspection light output functions
are controlled by a sequential switch on
the front of the light:
• Press and release the button to turn on
white light.
• Press and release button again to turn on
red light.
• Press and release button again to change
to flashing red light.
• Alternatively press and hold the button for
two seconds to turn on red light skipping
the white light stage.
The white light has a dimmable function:
• With the white light turned on, press and
hold the button down to increase or
decrease brightness. The light will flash
to indicate when it has reached the
highest or lowest level. Release the
button when the desired light output is
reached.
Under optimum conditions, with a full
charge, the light can normally be used for
1.5 hours.
To achieve the best performance from your
LED Mini Slimline Torch, always switch the
light off when the battery power begins to
run low, and recharge immediately.
www.lighthouse-torches.com
Lighthouse Torches, Phoenix House, 3 White Lodge Business Estate, Hall Road, Norwich, Norfolk, NR4 6DG
148 x 210mm