Lilin IM05108H User manual

INFRARED ILLUMINATOR
IM05108H/05308H/05608H
INSTRUCTION MANUAL
66-IM0510HCSE
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com

IMPORTANT SAFEGUARDS
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
shock to persons.
accompanying the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

FRONT FASCIA
BOTTOM CHASSIS
DAY/NIGHT OUTPUT
POWER CABLE
BRACKET
PA RT DESCRIPTION & DI MENSION
1
1
2
3
4
5
6
REAR COVER
LIGHT SENSOR
SEALING CAP (LIGHT SENSOR
SENSITIVITY ADJUST)
SEALING CAP (IR POWER ADJUST)
7
8
9
172
165
242
7
102.5
73
132
192.5
1
2
3
4
5
6
177
186.5
ψ9.5
80
Unit : mm
9 8

2
IN STALLAT ION
1. Attach the illuminator bracket to the pan and tilt unit, ceiling mount(FIG.1) or wall mount
(FIG.2).
FIG.1 FIG.2
2. Connect the power cable to AC100~240V(FIG.3).
Earth
Neutral
Live
Yellow/Green
(Green)
Blue
(White)
Brown
(Black)
FIG.3
If used power cable is like two wire combine, please put them separately on
"Live" and "Neutral".
Notice
3. If want to adopt ICR(IR Cut Filter Removable) of Day & Night camera to reach
synchronization action with illuminator, please connect the Day/Night output cable to
input of the camera. The White wire connect to “ ” , and Black wire connect to “ ” (GND).
IR illuminator will be triggered “Off”with 5V output voltage and IR illuminator will be
triggered “On”with 0V output voltage.
＋ －

FIG.4
” ”＋
” ”－
White
Black
For the security, if not used Day/Night output, please use the adhesive tape to
wrap the connections.
Notice
4. Adjust the horizontal alignment by loosening the bracket bolts to match the camera field
of view.
FIG.5 FIG.6
5. Adjust the vertical alignment by loosening the side bolts(one on each side of the main
body) to maximize the results.
FIG.7 FIG.8
3

6. To adjust light sensor sensitivity, first remove the sealing cap. Then adjust the
potentiometer to turn the IR illuminator on when the lighting conditions are lighter or
darker. Adjust further clockwise to make the IR illuminator turn on when it’s lighter and
counterclockwise when it’s darker.
FIG.9
To disable the light sensor adjust the sensitivity fully clockwise. This should
make the IR illuminator turn on all the time.
Notice
7. To adjust the IR power, first unscrew the sealing cap. Then adjust the power potentiometer
clockwise to increase the power and counterclockwise to turn the IR power down.
Please refer to FIG.9.
4
Lo Hi
Once all adjustments have been carried out, make sure that the sealing caps
are properly closed so as to ensure the hermetic seal of the product.
Notice

Maximum Radiant Distance
Infrared
LED
Quantity
Model No.
Power Input Voltage
Beam Angle
Power
Power On
Day/Night Output Voltage
Wave Length
Mounting
Construction
Operation Temperature
Dimensions
IP Rating
Maximum Power Consumption
Weight
AC100~240V
INFRARED ILLUMINATOR
24 Units
Sensor Auto Control, Adjustable Control Point
A d j u s t a b l e F r o m 26W to 55W
D C 5 V / D C 0 V
850nm
Ceiling & Wall
Aluminum & Polycarbonate
55W
-20 C ~ +50 C° ° ° °(-4 F ~ +122 F)
Main Body: 172mm(W) x 242mm(H) x 102.5mm(D),
Bracket: 165mm(W) x 192.5mm(H) x 132mm(D)
2100g
IP67
5
SPECIFICATIONS
Design and specifications are subject to change without notice.
IM05108H
10°
250M
IM05308H
30°
200M
IM05608H
60°
150M
66-IM0510HCSE-1

INFRARED ILLUMINATOR
IM05108H/05308H/05608H
INSTRUCTION MANUAL
66-IM0510HCSE
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com