LIMITLESS DigiClock LIM-DCLK User manual

WHAT’S INCLUDED
• (1) DigiClock
• (1) 36” Type-C to USB Cable
• (1) USB Wall Adapter
• (1) CR2016 Coin Battery (Installed)
• (1) User Manual
All rights reserved. Limitless DigiClock™,
DigiClock ™, and Limitless™ are trademarks of
Limitless Innovations, Inc. Design and
specifications subject to change without
notice. Products may vary from images shown.
Accessories sold separately.
LimitlessInnovations.com
[e-mail]
[phone]
Limitless Innovations, Inc.
4800 Metalmaster Way
McHenry, IL 60050
© Limitless Innovations, Inc.
SAFETY INFORMATION WARNINGS
By using the DigiClock, you hereby
agree that Limitless Innovations, Inc.,
an Illinois corporation and its aliates
(“Limitless”) shall have no liability for
any losses associated with property
damage, personal injury or loss of life
that are incurred by you or by any third
party in connection with or relating in
any manner whatsoever to your use of
the DigiClock. By using the DigiClock,
you hereby agree at all times to comply
fully with all safety warnings, operating
instructions and general safety
information in this user manual. By
using the DigiClock, you further agree
to hold harmless Limitless, (and
Limitless’ ocers, directors, shareholders
and employees) in connection with any
losses sustained by you (including,
without limitation, losses arising in
whole or in part from property damage,
personal injury or loss of life) relating in
any manner whatsoever to your use of
the DigiClock.
• The DigiClock is NOT a toy and
should be kept away from children.
• Do NOT use the DigiClock near a
magnetic or electric field.
• Do NOT use the DigiClock in
direct sunlight or extreme heat
for extended periods of time.
• Do NOT use the DigiClock if it has
been damaged and/or modified.
• Do NOT subject the DigiClock to
harsh chemicals.
• Do NOT submerge the DigiClock
or its accessories in water.
• Do NOT store the DigiClock
where temperatures will exceed
140° F (60° C).
• Do NOT insert any foreign objects
into the openings or port of the
DigiClock.
• Do NOT charge the DigiClock in
high humidity conditions.
• Do NOT attempt to disassemble,
repair, or open the DigiClock or its
accessories in any way.
• Do NOT paint or apply coatings to
the DigiClock as you might aect
moving parts or damage internal
components.
• Batteries should be recycled or
disposed of, as per state and local
guidelines.
To view the complete
user manual, please visit:
LimitlessInnovations.com/DigiClock
DigiClock™
Quick Start Guide
TECH SPECS
Model: LIM-DCLK-XXX
2x USB Output: 5V/2A (Max)
Type-C Input: 5V/2A
Size: 6.22” x 3.07” x 0.51”
Weight: 0.23 lb

WHAT’S INCLUDED
• (1) DigiClock
• (1) 36” Type-C to USB Cable
• (1) USB Wall Adapter
• (1) CR2016 Coin Battery (Installed)
• (1) User Manual
All rights reserved. Limitless DigiClock™,
DigiClock ™, and Limitless™ are trademarks of
Limitless Innovations, Inc. Design and
specifications subject to change without
notice. Products may vary from images shown.
Accessories sold separately.
LimitlessInnovations.com
[e-mail]
[phone]
Limitless Innovations, Inc.
4800 Metalmaster Way
McHenry, IL 60050
© Limitless Innovations, Inc.
SAFETY INFORMATION WARNINGS
By using the DigiClock, you hereby
agree that Limitless Innovations, Inc.,
an Illinois corporation and its aliates
(“Limitless”) shall have no liability for
any losses associated with property
damage, personal injury or loss of life
that are incurred by you or by any third
party in connection with or relating in
any manner whatsoever to your use of
the DigiClock. By using the DigiClock,
you hereby agree at all times to comply
fully with all safety warnings, operating
instructions and general safety
information in this user manual. By
using the DigiClock, you further agree
to hold harmless Limitless, (and
Limitless’ ocers, directors, shareholders
and employees) in connection with any
losses sustained by you (including,
without limitation, losses arising in
whole or in part from property damage,
personal injury or loss of life) relating in
any manner whatsoever to your use of
the DigiClock.
• The DigiClock is NOT a toy and
should be kept away from children.
• Do NOT use the DigiClock near a
magnetic or electric field.
• Do NOT use the DigiClock in
direct sunlight or extreme heat
for extended periods of time.
• Do NOT use the DigiClock if it has
been damaged and/or modified.
• Do NOT subject the DigiClock to
harsh chemicals.
• Do NOT submerge the DigiClock
or its accessories in water.
• Do NOT store the DigiClock
where temperatures will exceed
140° F (60° C).
• Do NOT insert any foreign objects
into the openings or port of the
DigiClock.
• Do NOT charge the DigiClock in
high humidity conditions.
• Do NOT attempt to disassemble,
repair, or open the DigiClock or its
accessories in any way.
• Do NOT paint or apply coatings to
the DigiClock as you might aect
moving parts or damage internal
components.
• Batteries should be recycled or
disposed of, as per state and local
guidelines.
To view the complete
user manual, please visit:
LimitlessInnovations.com/DigiClock
DigiClock™
Quick Start Guide
TECH SPECS
Model: LIM-DCLK-XXX
2x USB Output: 5V/2A (Max)
Type-C Input: 5V/2A
Size: 6.22” x 3.07” x 0.51”
Weight: 0.23 lb

WHAT’S INCLUDED
• (1) DigiClock
• (1) 36” Type-C to USB Cable
• (1) USB Wall Adapter
• (1) CR2016 Coin Battery (Installed)
• (1) User Manual
All rights reserved. Limitless DigiClock™,
DigiClock ™, and Limitless™ are trademarks of
Limitless Innovations, Inc. Design and
specifications subject to change without
notice. Products may vary from images shown.
Accessories sold separately.
LimitlessInnovations.com
[e-mail]
[phone]
Limitless Innovations, Inc.
4800 Metalmaster Way
McHenry, IL 60050
© Limitless Innovations, Inc.
SAFETY INFORMATION WARNINGS
By using the DigiClock, you hereby
agree that Limitless Innovations, Inc.,
an Illinois corporation and its aliates
(“Limitless”) shall have no liability for
any losses associated with property
damage, personal injury or loss of life
that are incurred by you or by any third
party in connection with or relating in
any manner whatsoever to your use of
the DigiClock. By using the DigiClock,
you hereby agree at all times to comply
fully with all safety warnings, operating
instructions and general safety
information in this user manual. By
using the DigiClock, you further agree
to hold harmless Limitless, (and
Limitless’ ocers, directors, shareholders
and employees) in connection with any
losses sustained by you (including,
without limitation, losses arising in
whole or in part from property damage,
personal injury or loss of life) relating in
any manner whatsoever to your use of
the DigiClock.
• The DigiClock is NOT a toy and
should be kept away from children.
• Do NOT use the DigiClock near a
magnetic or electric field.
• Do NOT use the DigiClock in
direct sunlight or extreme heat
for extended periods of time.
• Do NOT use the DigiClock if it has
been damaged and/or modified.
• Do NOT subject the DigiClock to
harsh chemicals.
• Do NOT submerge the DigiClock
or its accessories in water.
• Do NOT store the DigiClock
where temperatures will exceed
140° F (60° C).
• Do NOT insert any foreign objects
into the openings or port of the
DigiClock.
• Do NOT charge the DigiClock in
high humidity conditions.
• Do NOT attempt to disassemble,
repair, or open the DigiClock or its
accessories in any way.
• Do NOT paint or apply coatings to
the DigiClock as you might aect
moving parts or damage internal
components.
• Batteries should be recycled or
disposed of, as per state and local
guidelines.
To view the complete
user manual, please visit:
LimitlessInnovations.com/DigiClock
DigiClock™
Quick Start Guide
TECH SPECS
Model: LIM-DCLK-XXX
2x USB Output: 5V/2A (Max)
Type-C Input: 5V/2A
Size: 6.22” x 3.07” x 0.51”
Weight: 0.23 lb

WHAT’S INCLUDED
• (1) DigiClock
• (1) 36” Type-C to USB Cable
• (1) USB Wall Adapter
• (1) CR2016 Coin Battery (Installed)
• (1) User Manual
All rights reserved. Limitless DigiClock™,
DigiClock ™, and Limitless™ are trademarks of
Limitless Innovations, Inc. Design and
specifications subject to change without
notice. Products may vary from images shown.
Accessories sold separately.
LimitlessInnovations.com
[e-mail]
[phone]
Limitless Innovations, Inc.
4800 Metalmaster Way
McHenry, IL 60050
© Limitless Innovations, Inc.
SAFETY INFORMATION WARNINGS
By using the DigiClock, you hereby
agree that Limitless Innovations, Inc.,
an Illinois corporation and its aliates
(“Limitless”) shall have no liability for
any losses associated with property
damage, personal injury or loss of life
that are incurred by you or by any third
party in connection with or relating in
any manner whatsoever to your use of
the DigiClock. By using the DigiClock,
you hereby agree at all times to comply
fully with all safety warnings, operating
instructions and general safety
information in this user manual. By
using the DigiClock, you further agree
to hold harmless Limitless, (and
Limitless’ ocers, directors, shareholders
and employees) in connection with any
losses sustained by you (including,
without limitation, losses arising in
whole or in part from property damage,
personal injury or loss of life) relating in
any manner whatsoever to your use of
the DigiClock.
• The DigiClock is NOT a toy and
should be kept away from children.
• Do NOT use the DigiClock near a
magnetic or electric field.
• Do NOT use the DigiClock in
direct sunlight or extreme heat
for extended periods of time.
• Do NOT use the DigiClock if it has
been damaged and/or modified.
• Do NOT subject the DigiClock to
harsh chemicals.
• Do NOT submerge the DigiClock
or its accessories in water.
• Do NOT store the DigiClock
where temperatures will exceed
140° F (60° C).
• Do NOT insert any foreign objects
into the openings or port of the
DigiClock.
• Do NOT charge the DigiClock in
high humidity conditions.
• Do NOT attempt to disassemble,
repair, or open the DigiClock or its
accessories in any way.
• Do NOT paint or apply coatings to
the DigiClock as you might aect
moving parts or damage internal
components.
• Batteries should be recycled or
disposed of, as per state and local
guidelines.
To view the complete
user manual, please visit:
LimitlessInnovations.com/DigiClock
DigiClock™
Quick Start Guide
TECH SPECS
Model: LIM-DCLK-XXX
2x USB Output: 5V/2A (Max)
Type-C Input: 5V/2A
Size: 6.22” x 3.07” x 0.51”
Weight: 0.23 lb

WHAT’S INCLUDED
• (1) DigiClock
• (1) 36” Type-C to USB Cable
• (1) USB Wall Adapter
• (1) CR2016 Coin Battery (Installed)
• (1) User Manual
All rights reserved. Limitless DigiClock™,
DigiClock ™, and Limitless™ are trademarks of
Limitless Innovations, Inc. Design and
specifications subject to change without
notice. Products may vary from images shown.
Accessories sold separately.
LimitlessInnovations.com
[e-mail]
[phone]
Limitless Innovations, Inc.
4800 Metalmaster Way
McHenry, IL 60050
© Limitless Innovations, Inc.
SAFETY INFORMATION WARNINGS
By using the DigiClock, you hereby
agree that Limitless Innovations, Inc.,
an Illinois corporation and its aliates
(“Limitless”) shall have no liability for
any losses associated with property
damage, personal injury or loss of life
that are incurred by you or by any third
party in connection with or relating in
any manner whatsoever to your use of
the DigiClock. By using the DigiClock,
you hereby agree at all times to comply
fully with all safety warnings, operating
instructions and general safety
information in this user manual. By
using the DigiClock, you further agree
to hold harmless Limitless, (and
Limitless’ ocers, directors, shareholders
and employees) in connection with any
losses sustained by you (including,
without limitation, losses arising in
whole or in part from property damage,
personal injury or loss of life) relating in
any manner whatsoever to your use of
the DigiClock.
• The DigiClock is NOT a toy and
should be kept away from children.
• Do NOT use the DigiClock near a
magnetic or electric field.
• Do NOT use the DigiClock in
direct sunlight or extreme heat
for extended periods of time.
• Do NOT use the DigiClock if it has
been damaged and/or modified.
• Do NOT subject the DigiClock to
harsh chemicals.
• Do NOT submerge the DigiClock
or its accessories in water.
• Do NOT store the DigiClock
where temperatures will exceed
140° F (60° C).
• Do NOT insert any foreign objects
into the openings or port of the
DigiClock.
• Do NOT charge the DigiClock in
high humidity conditions.
• Do NOT attempt to disassemble,
repair, or open the DigiClock or its
accessories in any way.
• Do NOT paint or apply coatings to
the DigiClock as you might aect
moving parts or damage internal
components.
• Batteries should be recycled or
disposed of, as per state and local
guidelines.
To view the complete
user manual, please visit:
LimitlessInnovations.com/DigiClock
DigiClock™
Quick Start Guide
TECH SPECS
Model: LIM-DCLK-XXX
2x USB Output: 5V/2A (Max)
Type-C Input: 5V/2A
Size: 6.22” x 3.07” x 0.51”
Weight: 0.23 lb

HOW TO USECONTROL PANEL
Setting the Clock:
1. Press and hold the Mode Button for 2
seconds to enter the time setting mode.
2. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Time Setting Sequence:
Setting & Using the Alarm:
1. Press the Minus (-) Button to turn the
Alarm on/o. You should see the “AL”
Alarm Indicator on the Digital Display
when the Alarm is activated.
2. With the alarm turned on, click the
Mode (M) Button to view the current
alarm time setting.
3. Press and hold the Mode (M) Button for
2 seconds to enter the alarm time
setting mode.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Alarm Time Setting Sequence:
Turning O the Alarm
The alarm will ring for 2 minutes before
the automatic shut-o triggers.
1. Snooze the Alarm
a. Press the Snooze Button to
enter the Snooze mode. The
“AL” Alarm Indicator will blink.
b. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o
Snooze mode.
2. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o the
alarm.
COMPONENTS
Mirrored Digital Display
“AL” Alarm Indicator
12-Hour PM Indicator
Light Sensor
Mode Button (M)
Plus Button (+)
Minus Button (-)
Snooze Button
Keyhole
Backup Battery Slot
Removable Base
USB Output 1
USB Output 2
Type-C Input
Adjusting the Brightness:
Click the Plus (+) Button to adjust
the brightness.
Brightness Levels:
Light Sensitivity Function:
There is a built-in light sensor that can
automatically adjust the brightness of the
Digital Display based on the environment.
Press and hold the Plus (+) Button to turn
this feature on/o.
Night Mode:
This feature will automatically adjust
the brightness of the Digital Display
to the Dark brightness level at the
programmed time.
1. Double click the Mode Button to enter
the Night Mode selection.
2. Press the Plus (+) or Minus (-) Button to
turn the Night Mode on/o.
3. With Night Mode turned on, press and
hold the Mode (M) Button to enter the
Night Mode time setting.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Night Mode Time Setting Sequence:
NOTE: The Light Sensitivity Function and
Night Mode cannot be used at the same
time.
Charging a Mobile Device:
Plug a USB cable into one of the USB-A
Outputs & into a device. The device will
begin to charge.
Backup Battery:
The CR2016 Coin Battery is pre-installed
in the Backup Battery Slot to enable the
alarm-save in case of a power outage.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
MSingle Click:
Check Alarm Time
Double Click:
Night Mode
Press & Hold (2 Seconds):
Enter Time Setting Mode
+Single Click:
Adjust the Brightness
Press & Hold:
Turn On/O Light Sensitivity Mode
In Time Setting Mode:
Single Click:
Increase the Value By 1
Press & Hold:
Increase the Value 8 / Second
–Single Click:
Turn On/O the Alarm
In Time Setting Mode:
Single Click:
Decrease the Value By 1
Press & Hold:
Decrease the Value 8 / Second
Hours Minutes Snooze Duration
24-Hour 12-Hour Hours Minutes
Bright Medium Dark
PMAL
Start Hour Start Minute End Hour End Minute
3
11
9
10
8
4
5
6
7
12
13
14
21

HOW TO USECONTROL PANEL
Setting the Clock:
1. Press and hold the Mode Button for 2
seconds to enter the time setting mode.
2. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Time Setting Sequence:
Setting & Using the Alarm:
1. Press the Minus (-) Button to turn the
Alarm on/o. You should see the “AL”
Alarm Indicator on the Digital Display
when the Alarm is activated.
2. With the alarm turned on, click the
Mode (M) Button to view the current
alarm time setting.
3. Press and hold the Mode (M) Button for
2 seconds to enter the alarm time
setting mode.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Alarm Time Setting Sequence:
Turning O the Alarm
The alarm will ring for 2 minutes before
the automatic shut-o triggers.
1. Snooze the Alarm
a. Press the Snooze Button to
enter the Snooze mode. The
“AL” Alarm Indicator will blink.
b. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o
Snooze mode.
2. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o the
alarm.
COMPONENTS
Mirrored Digital Display
“AL” Alarm Indicator
12-Hour PM Indicator
Light Sensor
Mode Button (M)
Plus Button (+)
Minus Button (-)
Snooze Button
Keyhole
Backup Battery Slot
Removable Base
USB Output 1
USB Output 2
Type-C Input
Adjusting the Brightness:
Click the Plus (+) Button to adjust
the brightness.
Brightness Levels:
Light Sensitivity Function:
There is a built-in light sensor that can
automatically adjust the brightness of the
Digital Display based on the environment.
Press and hold the Plus (+) Button to turn
this feature on/o.
Night Mode:
This feature will automatically adjust
the brightness of the Digital Display
to the Dark brightness level at the
programmed time.
1. Double click the Mode Button to enter
the Night Mode selection.
2. Press the Plus (+) or Minus (-) Button to
turn the Night Mode on/o.
3. With Night Mode turned on, press and
hold the Mode (M) Button to enter the
Night Mode time setting.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Night Mode Time Setting Sequence:
NOTE: The Light Sensitivity Function and
Night Mode cannot be used at the same
time.
Charging a Mobile Device:
Plug a USB cable into one of the USB-A
Outputs & into a device. The device will
begin to charge.
Backup Battery:
The CR2016 Coin Battery is pre-installed
in the Backup Battery Slot to enable the
alarm-save in case of a power outage.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
MSingle Click:
Check Alarm Time
Double Click:
Night Mode
Press & Hold (2 Seconds):
Enter Time Setting Mode
+Single Click:
Adjust the Brightness
Press & Hold:
Turn On/O Light Sensitivity Mode
In Time Setting Mode:
Single Click:
Increase the Value By 1
Press & Hold:
Increase the Value 8 / Second
–Single Click:
Turn On/O the Alarm
In Time Setting Mode:
Single Click:
Decrease the Value By 1
Press & Hold:
Decrease the Value 8 / Second
Hours Minutes Snooze Duration
24-Hour 12-Hour Hours Minutes
Bright Medium Dark
PMAL
Start Hour Start Minute End Hour End Minute
3
11
9
10
8
4
5
6
7
12
13
14
21

HOW TO USECONTROL PANEL
Setting the Clock:
1. Press and hold the Mode Button for 2
seconds to enter the time setting mode.
2. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Time Setting Sequence:
Setting & Using the Alarm:
1. Press the Minus (-) Button to turn the
Alarm on/o. You should see the “AL”
Alarm Indicator on the Digital Display
when the Alarm is activated.
2. With the alarm turned on, click the
Mode (M) Button to view the current
alarm time setting.
3. Press and hold the Mode (M) Button for
2 seconds to enter the alarm time
setting mode.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Alarm Time Setting Sequence:
Turning O the Alarm
The alarm will ring for 2 minutes before
the automatic shut-o triggers.
1. Snooze the Alarm
a. Press the Snooze Button to
enter the Snooze mode. The
“AL” Alarm Indicator will blink.
b. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o
Snooze mode.
2. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o the
alarm.
COMPONENTS
Mirrored Digital Display
“AL” Alarm Indicator
12-Hour PM Indicator
Light Sensor
Mode Button (M)
Plus Button (+)
Minus Button (-)
Snooze Button
Keyhole
Backup Battery Slot
Removable Base
USB Output 1
USB Output 2
Type-C Input
Adjusting the Brightness:
Click the Plus (+) Button to adjust
the brightness.
Brightness Levels:
Light Sensitivity Function:
There is a built-in light sensor that can
automatically adjust the brightness of the
Digital Display based on the environment.
Press and hold the Plus (+) Button to turn
this feature on/o.
Night Mode:
This feature will automatically adjust
the brightness of the Digital Display
to the Dark brightness level at the
programmed time.
1. Double click the Mode Button to enter
the Night Mode selection.
2. Press the Plus (+) or Minus (-) Button to
turn the Night Mode on/o.
3. With Night Mode turned on, press and
hold the Mode (M) Button to enter the
Night Mode time setting.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Night Mode Time Setting Sequence:
NOTE: The Light Sensitivity Function and
Night Mode cannot be used at the same
time.
Charging a Mobile Device:
Plug a USB cable into one of the USB-A
Outputs & into a device. The device will
begin to charge.
Backup Battery:
The CR2016 Coin Battery is pre-installed
in the Backup Battery Slot to enable the
alarm-save in case of a power outage.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
MSingle Click:
Check Alarm Time
Double Click:
Night Mode
Press & Hold (2 Seconds):
Enter Time Setting Mode
+Single Click:
Adjust the Brightness
Press & Hold:
Turn On/O Light Sensitivity Mode
In Time Setting Mode:
Single Click:
Increase the Value By 1
Press & Hold:
Increase the Value 8 / Second
–Single Click:
Turn On/O the Alarm
In Time Setting Mode:
Single Click:
Decrease the Value By 1
Press & Hold:
Decrease the Value 8 / Second
Hours Minutes Snooze Duration
24-Hour 12-Hour Hours Minutes
Bright Medium Dark
PMAL
Start Hour Start Minute End Hour End Minute
3
11
9
10
8
4
5
6
7
12
13
14
21

HOW TO USECONTROL PANEL
Setting the Clock:
1. Press and hold the Mode Button for 2
seconds to enter the time setting mode.
2. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Time Setting Sequence:
Setting & Using the Alarm:
1. Press the Minus (-) Button to turn the
Alarm on/o. You should see the “AL”
Alarm Indicator on the Digital Display
when the Alarm is activated.
2. With the alarm turned on, click the
Mode (M) Button to view the current
alarm time setting.
3. Press and hold the Mode (M) Button for
2 seconds to enter the alarm time
setting mode.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Alarm Time Setting Sequence:
Turning O the Alarm
The alarm will ring for 2 minutes before
the automatic shut-o triggers.
1. Snooze the Alarm
a. Press the Snooze Button to
enter the Snooze mode. The
“AL” Alarm Indicator will blink.
b. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o
Snooze mode.
2. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o the
alarm.
COMPONENTS
Mirrored Digital Display
“AL” Alarm Indicator
12-Hour PM Indicator
Light Sensor
Mode Button (M)
Plus Button (+)
Minus Button (-)
Snooze Button
Keyhole
Backup Battery Slot
Removable Base
USB Output 1
USB Output 2
Type-C Input
Adjusting the Brightness:
Click the Plus (+) Button to adjust
the brightness.
Brightness Levels:
Light Sensitivity Function:
There is a built-in light sensor that can
automatically adjust the brightness of the
Digital Display based on the environment.
Press and hold the Plus (+) Button to turn
this feature on/o.
Night Mode:
This feature will automatically adjust
the brightness of the Digital Display
to the Dark brightness level at the
programmed time.
1. Double click the Mode Button to enter
the Night Mode selection.
2. Press the Plus (+) or Minus (-) Button to
turn the Night Mode on/o.
3. With Night Mode turned on, press and
hold the Mode (M) Button to enter the
Night Mode time setting.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Night Mode Time Setting Sequence:
NOTE: The Light Sensitivity Function and
Night Mode cannot be used at the same
time.
Charging a Mobile Device:
Plug a USB cable into one of the USB-A
Outputs & into a device. The device will
begin to charge.
Backup Battery:
The CR2016 Coin Battery is pre-installed
in the Backup Battery Slot to enable the
alarm-save in case of a power outage.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
MSingle Click:
Check Alarm Time
Double Click:
Night Mode
Press & Hold (2 Seconds):
Enter Time Setting Mode
+Single Click:
Adjust the Brightness
Press & Hold:
Turn On/O Light Sensitivity Mode
In Time Setting Mode:
Single Click:
Increase the Value By 1
Press & Hold:
Increase the Value 8 / Second
–Single Click:
Turn On/O the Alarm
In Time Setting Mode:
Single Click:
Decrease the Value By 1
Press & Hold:
Decrease the Value 8 / Second
Hours Minutes Snooze Duration
24-Hour 12-Hour Hours Minutes
Bright Medium Dark
PMAL
Start Hour Start Minute End Hour End Minute
3
11
9
10
8
4
5
6
7
12
13
14
21

HOW TO USECONTROL PANEL
Setting the Clock:
1. Press and hold the Mode Button for 2
seconds to enter the time setting mode.
2. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Time Setting Sequence:
Setting & Using the Alarm:
1. Press the Minus (-) Button to turn the
Alarm on/o. You should see the “AL”
Alarm Indicator on the Digital Display
when the Alarm is activated.
2. With the alarm turned on, click the
Mode (M) Button to view the current
alarm time setting.
3. Press and hold the Mode (M) Button for
2 seconds to enter the alarm time
setting mode.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Alarm Time Setting Sequence:
Turning O the Alarm
The alarm will ring for 2 minutes before
the automatic shut-o triggers.
1. Snooze the Alarm
a. Press the Snooze Button to
enter the Snooze mode. The
“AL” Alarm Indicator will blink.
b. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o
Snooze mode.
2. Press the Mode (M), Plus (+), or
Minus (-) Button to turn o the
alarm.
COMPONENTS
Mirrored Digital Display
“AL” Alarm Indicator
12-Hour PM Indicator
Light Sensor
Mode Button (M)
Plus Button (+)
Minus Button (-)
Snooze Button
Keyhole
Backup Battery Slot
Removable Base
USB Output 1
USB Output 2
Type-C Input
Adjusting the Brightness:
Click the Plus (+) Button to adjust
the brightness.
Brightness Levels:
Light Sensitivity Function:
There is a built-in light sensor that can
automatically adjust the brightness of the
Digital Display based on the environment.
Press and hold the Plus (+) Button to turn
this feature on/o.
Night Mode:
This feature will automatically adjust
the brightness of the Digital Display
to the Dark brightness level at the
programmed time.
1. Double click the Mode Button to enter
the Night Mode selection.
2. Press the Plus (+) or Minus (-) Button to
turn the Night Mode on/o.
3. With Night Mode turned on, press and
hold the Mode (M) Button to enter the
Night Mode time setting.
4. Use the Plus (+) and Minus (-) Buttons
to adjust the values and the Mode (M)
Button to switch to the next sequence.
Night Mode Time Setting Sequence:
NOTE: The Light Sensitivity Function and
Night Mode cannot be used at the same
time.
Charging a Mobile Device:
Plug a USB cable into one of the USB-A
Outputs & into a device. The device will
begin to charge.
Backup Battery:
The CR2016 Coin Battery is pre-installed
in the Backup Battery Slot to enable the
alarm-save in case of a power outage.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
MSingle Click:
Check Alarm Time
Double Click:
Night Mode
Press & Hold (2 Seconds):
Enter Time Setting Mode
+Single Click:
Adjust the Brightness
Press & Hold:
Turn On/O Light Sensitivity Mode
In Time Setting Mode:
Single Click:
Increase the Value By 1
Press & Hold:
Increase the Value 8 / Second
–Single Click:
Turn On/O the Alarm
In Time Setting Mode:
Single Click:
Decrease the Value By 1
Press & Hold:
Decrease the Value 8 / Second
Hours Minutes Snooze Duration
24-Hour 12-Hour Hours Minutes
Bright Medium Dark
PMAL
Start Hour Start Minute End Hour End Minute
3
11
9
10
8
4
5
6
7
12
13
14
21