Linak BLE2LIN002 User manual

The Bluetooth®Adapter allows you to adjust your LINAK
product wirelessly from an app or Bluetooth®hand control.
Simply plug the Bluetooth®Adapter in your HOMELINE®
control box or HOMELINE product and download the app:
Your application can now be adjusted via your smartphone
or tablet. The Bluetooth®Adapter is a very compact unit
requiring a minimum of space. No mounting is needed, just
plug in the adapter and you are ready.
The Adapter
The Adapter ............................................................... 3
Connect to bed ........................................................... 4
How to download the App for Android......................... 4
How to download the App for iOS ............................... 4
How to put the adapter in pairing mode ...................... 5
Pairing Bluetooth ........................................................ 6
Buttons....................................................................... 7
Table of contents
234
LINAK Bluetooth®Adapter for bed
iPod touch, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S.
and other countries.
“Made for iPod touch”, “Made for iPhone,” and “Made for iPad” mean that
an electronic accessory has been designed to connect specifically to iPod touch,
iPhone, or iPad, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please note that
the use of this accessory with iPod touch, iPhone or iPad may affect wireless
performance.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Ascion, LLC is under license. Other trademarks and
trade names are those of their respective owners.
Connect the Bluetooth®Adapter to the CBH Advanced or
the TD3 simply by plugging it in. The Bluetooth®Adapter is
a very compact unit requiring a minimum of space.
No mounting is needed, just plug in the adapter and you
are ready.
Connect to bed
Step 1:
Please use your Android device to log into Google Play Store.
Step 2:
Type “Bed Control” in the search column.
Step 3:
Select the “Bed Control” app best suited for your product.
If your product supports memory positions, select the “Bed
Control Memory” app.
Step 4:
Click install to download the app to your device.
How to download the App for Android:
Step 1:
Please use your Apple device to log into App store.
Step 2:
Type “Bed Control” in the search column.
Step 3:
Select the “Bed Control” app best suited for your product.
If your product supports memory positions, select the “Bed
Control Memory” app.
Step 4:
Click install to download the app to your device.
How to download the App for iOS:
Made for
• iOS devices with Bluetooth®4.0 or newer
• iOS devices with iOS 9.0 or newer
• Android devices with Bluetooth®4.0 or newer
• Android devices with 5.0 or newer

Select back or leg
Select which part to operate back or leg. Backrest (A) and
leg rest (B)
UP (C)
Moves the selected part up
Down (D)
Moves the selected part down
Synchronous drive up and down (E), (F)
Moves both back and leg up or down at the same time –
independent of the selected part
Light (G), (H)
Turns on or off the under bed light. The light box must be
purchased as an accessory.
Buttons
678
AB
C
D
E
F
G
H
I
Turns light on
Turns light off
Leg rest
Moves the back
rest and leg
rest up at the
same time
Moves the back
rest and leg
rest down at
the same time
Back rest
Moves the selected
part up
Moves the
selected part down
Stored positions
(up to 4 available)
Go to search screen
Settings
Copyright© LINAK .2016.12 . MA-M9-02-645 .LINAK A/S reserves the right to make technical alterations
Plug the Bluetooth Adapter into a powered HOMELINE®
control box or a TD3.
How to put the adapter in pairing mode
The pairing mode will last 3 minutes and is indicated with a
blue flashing LED light that is visible through the transparent
plastic. (It can take up to 10 seconds before pairing mode
starts).
Storing positions (I)
4 stored positions can be directly accessed by pressing the
corresponding button
Storing positions
Via the settings page 4 positions are possible to store.
Simply press the button and the actual position is stored.
Via the bed control page the bed moves to this position
when the corresponding icon is pressed.
Switch bed
To select another connected bed, press the Bluetooth icon
in the top right corner of the screen.Then select a connected
bed from the list or scan to find new devices.
Renaming bed
The paired application can be renamed in the Android app
on the settings screen. The iOS version does not support
renaming the device, so the new name will only be saved
in the app.
When the Bluetooth®Adapter is plugged into a powered
TD3 or CBH Advanced, it will be in pairing mode for 3
minutes. A blue blinking LED will indicate this.
You pair your device to the Bluetooth®Adapter in the app.
Enable Bluetooth on your smartphone or tablet. Open the
Bed Control app or Bed Control Memory app and a “search
bed” page will be available.
When searching; All devices will be called BLE2LIN followed
by a 4-digit number.
A list of Bluetooth Adapters and previously connected
Bluetooth Adapters will appear, tap the adapter you want to
connect to.Your device is now paired to the adapter and the
app will display the operation page.
The Bluetooth Adapter automatically reestablish the
connection to the paired devices once they are within range
and turned on.
The only difference between Bed Control and Bed Control
Memory is that there is no memory positions displayed in
Bed Control.
Pairing Bluetooth
Download the software you want in App Store or Google
Play store and follow the instructions in the programs.