Linear Technology DC1555B Quick setup guide

1
dc1555bfa
DEMO MANUAL DC1555B
Description
LTC4365: High Voltage
UV, OV and Reverse Supply
Protection Controller
Demonstration circuit DC1555B isintended to demonstrate
the performance of the LTC4365 High Voltage Undervoltage
(UV), Overvoltage (OV) and Reverse Supply Protection
Controller.
The LTC4365 protects circuits from input voltages thatmay
be too high, too low or negative. It operates by controlling
the gates of two back-to-back connected MOSFETs to keep
the output in a safe range. The OV and UV protection levels
are adjusted by resistive dividers at the OV and UV pins.
Asserting the SHDN pin disables the MOSFETs and places
the LTC4365 in a low-current shutdown state. The FAULT
pin is asserted when the Controller is in shutdown mode L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.
perForMAnce sUMMArY
(TA= 25°C)
or when the input voltage is outside of the UV or OV level.
The LTC4365 can withstand DC voltages between –40V
and 60V and has a valid operating range of 2.5V to 34V.
The DC1555B includes the LTC4365 Controller, two back-
to-back connected power MOSFETs, three jumpers and
three LEDs to indicate the input and output voltages and
the FAULT pin signal.
Design files for this circuit board are available at
http://www.linear.com/demo
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
VIN Board Input Voltage Range –30 30 V
VIN(UVLO) Input Supply Undervoltage Lockout VIN Rising 1.8 2.2 2.4 V
IVIN Input Supply Current SHDN = 0V
SHDN = 2.5V
10
25
50
150
µA
µA
IVIN(R) Reverse Input Supply Current VIN = –40V, VOUT = 0V –1.2 –1.8 mA
ΔVGATE External N-Channel Gate Drive (GATE – VOUT) VIN = VOUT = 5V, IGATE = –1µA
VIN = VOUT = 12V to 34V, IGATE = –1µA
3
7.4
3.6
8.4
4.2
9.8
V
V
IGATE(UP) External N-Channel Gate Pull-Up current GATE = VIN = VOUT = 12V –12 –20 –30 µA
IGATE(FAST) External N-Channel Fast Gate Pull-Down Current Fast Shutdown, GATE = 20V, VIN = VOUT = 12V 31 50 72 mA
IGATE(SLOW) External N-Channel Gentle Gate Pull-Down Current Gentle Shutdown, GATE = 20V, VIN = VOUT = 12V 50 90 150 µA
VUV UV Input Threshold Voltage UV Falling →ΔVGATE = 0V 492.5 500 507.5 mV
VOV OV Input Threshold Voltage OV Rising →ΔVGATE = 0V 492.5 500 507.5 mV
tGATE(FAST) External N-Channel Fast Gate Turn-Off Delay CGATE = 2.2nF, UV or OV Fault 2 4 µs
tFAULT OV, UV Fault Propagation Delay Overdrive = 50mV, VIN = VOUT = 12V 1 2 µs
VSHDN SHDN Input Threshold SHDN Falling to ΔVGATE = 0V 0.4 0.75 1.2 V
Downloaded from Arrow.com.

2
dc1555bfa
DEMO MANUAL DC1555B
operAting principles
The LTC4365 monitors the input rail voltage and discon-
nects downstream circuits when the input voltage is too
low, too high or negative. The LTC4365 provides accurate
overvoltage and undervoltage comparators to ensure that
power is applied to the system only if the input supply
is within the allowable voltage window. Reverse supply
Demonstration circuit 1555B is easy to set up to evaluate
the performance of the LTC4365. Refer to Figures 1a and
1b for proper measurement equipment setup and follow
the procedure below.
Note that the circuit on the DC1555B is optimized for 12V
operation; The Si4230 FET limits overvoltage and reverse
voltage to 30V and –30V,respectively. Refer to the LTC4365
data sheet for applications optimized for other voltages.
Reverse Voltage Tests (Figure 1a)
1) Set JP1 to EN.
2) Set JP2 and JP3 to CONNECT LED.
3) Connect a power supply across VIN and GND in negative
configuration (connect positive rail to GND and negative
rail to VIN).
4) Connect voltmeters at the input and output andammeter
in series with supply.
5) Ramp supply down to –30V (referenced to GND).
6) Verify output voltage is between 0V and –0.5V, all LEDs
are off, and input current is <1.8mA. (FET leakage or
other board leakage paths can pull VOUT slightly nega-
tive, but it will be clamped by the internal protection
diode.)
7) Ramp supply back to 0V.
qUick stArt proceDUre
protection circuit automatically isolates the load from
negative input voltages.
During normal operation, a high voltage charge pump
enhances the gate of external N-channel power MOSFETs.
The LTC4365 consumes 10µA during shutdown and 125µA
while operating.
Undervoltage/Overvoltage Test (Figure 1b)
8) Reverse the polarity of power supply connection across
VIN to GND (connect positive rail to VIN and negative
rail to GND).
9) Ramp supply up to 30V and verify green VIN LED, red
FAULT LED, green VOUT LED, and VOUT according to
Table 1 within the various voltage ranges.
10) Ramp supply down from 30V down to 0V and verify
green VIN LED, red FAULT LED, green VOUT LED, and
VOUT according to Table 1.
11) Repeat steps 9 and 10 with 8A load connected across
VOUT and GND.
Table 1
VIN VOUT VIN LED VOUT LED FAULT LED
0V to 5.77V = 0V Off/Dim/On Off On
6.56V to 13.51V = VIN On On Off
15.47V to 30V = 0V On Off On
Jumper Test
12) Remove load and set supply to 9V.
13) Move jumpers and verify LEDs according to Table 2.
Table 2
JP1 JP2/JP3 VIN LED VOUT LED
EN CONNECT LED On On
DIS CONNECT LED On Off
EN Open Off Off
Downloaded from Arrow.com.Downloaded from Arrow.com.

3
dc1555bfa
DEMO MANUAL DC1555B
0V TO 30V
–
+
dc1555b F01a
POWER
SUPPLY
0V TO 30V
+
–LOAD
dc1555b F01b
R
POWER
SUPPLY
qUick stArt proceDUre
Figure 1a. Reverse Voltage Measurement
Figure 1b. Undervoltage/Overvoltage Measurement
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

4
dc1555bfa
DEMO MANUAL DC1555B
pArts list
ITEM QUANTITY REFERENCE DESCRIPTION MANUFACTURERS PART NUMBER
Required Circuit Components
1 3 CLD1, CLD2, CLD3 Current Limiting, Diode, SOD-80 Central Semi. Corporation, CCLM2000
2 0 C1 (OPT) Capacitor, X5R, 4.7µF, 50V, 20%, 1210 Taiyo Yuden, UMK325BJ475MM-T
3 0 C2 (OPT) Capacitor, Alum, 47µF, 35V, 10%, OSCON-CE-6.3 Sanyo, 35CE47AX
4 0 C3 (OPT) Capacitor, X5R, 10µF, 25V, 10%, 1210 Taiyo Yuden, TMK325BJ106KM
5 2 D1, D2 LED, GRN Panasonic, LN1351CTR
6 1 D3 LED, RED Panasonic, LN1251CTR
7 1 D4 Diode, 75V/200mW, SOD-523 Diodes Inc., 1N4148WT
8 0 D5 (OPT) Zener Diode, 15V, SOD-523 Diodes Inc., BZT52C15T #PbF
9 0 D6 (OPT) Zener Diode, 20V, POWERDI-123 Diodes Inc., DFLT20A #PbF
10 0 D7 (OPT) Zener Diode, 40V, POWERDI-123 Diodes Inc., DFLT40A #PbF
11 4 E1, E2, E6, E7 Turret, Testpoint 0.094" Mill Max 2501-2-00-80-00-00-07-0
12 4 E3, E4, E5, E8 Turret, Testpoint 0.063" Mill Max 2308-2-00-80-00-00-07-0
13 3 JP1, JP2, JP3 Headers, Sgl. Row, 3 Pins, 2mm Ctrs. Samtec, TMM-103-02-L-S
14 1 Q1 Dual N-Channel, 30V, SO-8 Vishay, SI4230DY-T1-GE3
15 0 Q2 (OPT) Dual N-Channel, Low Current, SOT-563 Diodes Inc., 2N7002V-7
16 1 R1 (Bal to #1608A) Resistor, Chip, 1M, 0.06W, 1%, 0603 Vishay, CRCW06031M00FKEA
17 1 R2 Resistor, Chip, 54.9k, 0.06W, 1%, 0603 Vishay, CRCW060354K9FKEA
18 1 R3 Resistor, Chip, 36.5k, 0.06W, 1%, 0603 Vishay, CRCW060336K5FKEA
19 1 R4 Resistor, Chip, 510k, 0.06W, 5%, 0603 Vishay, CRCW0603510KJNEA
20 1 U1 IC, Over/Under/RevV/RevI Protection, SC8 Linear Technology Corporation, LTC4365CTS8
21 3 XJP1, XJP2, XJP3 Shunt, 2mm Ctrs. Samtec, 2SN-BK-G
22 4 Stand-Off, Nylon, 0.25" Tall Keystone, 8831(Snap On)
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

5
dc1555bfa
DEMO MANUAL DC1555B
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use.Linear Technology Corporation makes no representation
that the interconnection of its circuits as described herein will not infringe on existing patent rights.
scheMAtic DiAgrAM
5 5
4 4
3 3
2 2
1 1
D D C C B B A A

 

 





 




 
REVISION HISTORY
DESCRIPTION DATE
APPROVED
ECO REV

 
REVISION HISTORY
DESCRIPTION DATE
APPROVED
ECO REV

 
REVISION HISTORY
DESCRIPTION DATE
APPROVED
ECO REV

 
SIZE MODIFY DATE:
IC NO. REV.
SHEET OF
TITLE:
APPROVALS
PCB DES.
APP ENG.
TECHNOLOGY

 


CUSTOMER NOTICE
LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS; HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL APPLICATION. COMPONENT SUBSTITUTION AND PRINTED CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT PERFORMANCE OR RELIABILITY. CONTACT LINEAR TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE. THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND
SCHEMATIC
SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.
SCALE = NONE
www.linear.com
1


11




Vlad O.

SIZE MODIFY DATE:
IC NO. REV.
SHEET OF
TITLE:
APPROVALS
PCB DES.
APP ENG.
TECHNOLOGY

 


CUSTOMER NOTICE
LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS; HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL APPLICATION. COMPONENT SUBSTITUTION AND PRINTED CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT PERFORMANCE OR RELIABILITY. CONTACT LINEAR TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE. THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND
SCHEMATIC
SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.
SCALE = NONE
www.linear.com
1


11




Vlad O.

SIZE MODIFY DATE:
IC NO. REV.
SHEET OF
TITLE:
APPROVALS
PCB DES.
APP ENG.
TECHNOLOGY

 


CUSTOMER NOTICE
LINEAR TECHNOLOGY HAS MADE A BEST EFFORT TO DESIGN A CIRCUIT THAT MEETS CUSTOMER-SUPPLIED SPECIFICATIONS; HOWEVER, IT REMAINS THE CUSTOMER'S RESPONSIBILITY TO VERIFY PROPER AND RELIABLE OPERATION IN THE ACTUAL APPLICATION. COMPONENT SUBSTITUTION AND PRINTED CIRCUIT BOARD LAYOUT MAY SIGNIFICANTLY AFFECT CIRCUIT PERFORMANCE OR RELIABILITY. CONTACT LINEAR TECHNOLOGY APPLICATIONS ENGINEERING FOR ASSISTANCE. THIS CIRCUIT IS PROPRIETARY TO LINEAR TECHNOLOGY AND
SCHEMATIC
SUPPLIED FOR USE WITH LINEAR TECHNOLOGY PARTS.
SCALE = NONE
www.linear.com
1


11




Vlad O.










 

 












+
 


+
 


     










 






     
     
 

  












  
 

 



 










   




     






  

 

 








  




 

 





VIN

GATE

UV

VOUT

FAULT

OV

GND

SHDN

 

 


 
     
   








Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

6
dc1555bfa
DEMO MANUAL DC1555B
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone] ●FAX: [phone] ●www.linear.com
 LINEAR TECHNOLOGY CORPORATION 2011
LT 0413 REV A • PRINTED IN USA
DEMONSTRATION BOARD IMPORTANT NOTICE
Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions:
This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT
OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use. As such, the DEMO BOARD herein may not be complete
in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety
measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union direc-
tive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations.
If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date
of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LTC from all claims
arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all
appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or
agency certified (FCC, UL, CE, etc.).
No License is granted under any patent right or other intellectual property whatsoever. LTC assumes no liability for applications assistance,
customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind.
LTC currently services a variety of customers for products around the world, and therefore this transaction is not exclusive.
Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and
observe good laboratory practice standards. Common sense is encouraged.
This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LTC applica-
tion engineer.
Mailing Address:
Linear Technology
1630 McCarthy Blvd.
Milpitas, CA 95035
Copyright © 2004, Linear Technology Corporation
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.