Linkedpro GAP-V4 Series User manual

X
625 mm600 mm
NOT INCLUDED
NOT INCLUDED
SISTEMAS Y SERVICIOS DE COMUNICACIÓN S.A. DE C.V.
Calle 20 de Noviembre #805, Col. Centro
[phone]
C.P. 31000, Chihuahua, Chih, México
Read this user manual before using the equipment
and keep it for future reference.
User Manual GAP-V4 Series
Folding cabinet (with back door) for
wall mounng with 19" Rack.
KIT DE TORNILLERÍA
Wall fixing.
1. Once the ideal anchors have been defined according to the wall material,
proceed to fix the assembly to it.
2. Place 4 1/2" screws and washers (NOT INCLUDED) to the wall coinciding
with the cabinets perforations.
3. Place the screws into the mount ensuring the stability of the cabinet.
4. Tighten all the screws.
Model Height (X)
SR1906GAPV4 352mm
SR1909GAPV4 487mm
SR1912GAPV4 620mm
SR1916GAPV4 795mm
SR1924GAPV4 1,150mm
ELEMENT QUANTITY
1/4" HEX SCREW 32
1/4" NUT 32
CAGE NUT 14
10-24 HEX NUT 1
10-32 ANTI-SLIP NUT 8
10-32 CONE SCREW 22
BLACK PLASTIC WASHER 12
PLASTIC PLUG 4
HINGE FOR MOUNTING 2

1
ASSEMBLE
MOUNTING
INSTALLATION (LEFT)
INSTALLATION (RIGHT)
2
OPENS TO THE RIGHT
(LATCH POINTING UP)
OPENS TO THE LEFT
(LATCH POINTING DOWN)
Thanks for adquiring this cabinet SR19XXGAPV4.
The information contained in this manual will
help you to assemble this product.
Recommendations
Begin to Install the equipment(s) only until you •
have finished installing the Cabinet.
Place the components and tighten the pieces •
until everything is assembled.
Tools
- 7/16" wrench or socket.
- Cross screwdriver.
3 4
5
SCREW
6
POSITION AND SCREW
ASSEMBLE
POSITION AND SCREW
SWING-OUT LEFT or RIGHT
ASSEMBLE