Linksys 5G WiFi 6 User manual

1
Linksys
FGW3000
User Guide

2
Table of Contents
Table of Contents .............................................................................................................................2
Introduction......................................................................................................................................4
Product Overview.............................................................................................................4
LED Indicators...................................................................................................................5
Installation........................................................................................................................7
Web Interface...................................................................................................................................8
Login to Web-GUI .............................................................................................................8
Detailed Configuration Page ..........................................................................................10
Menu Structure ..............................................................................................................11
Mobile Network | PIN ............................................................................................................12
WiFi.................................................................................................................................15
WiFi | Status...........................................................................................................................16
WiFi | Settings | WiFi 2.4GHz.........................................................................................17
WiFi | Settings | WiFi 5GHz............................................................................................20
Network..................................................................................................................................23
Network | Status ............................................................................................................24
Network | WAN Setting (NAT Mode).............................................................................26
Network | LAN Setting ...................................................................................................27
Network | Port Management ........................................................................................30
IPv6 .........................................................................................................................................31
IPv6 | Status ...................................................................................................................32
IPv6 | Settings ................................................................................................................32
Firewall ...................................................................................................................................33
Firewall | Basic ...............................................................................................................34
Firewall | Access Restriction ..........................................................................................35
Management ..........................................................................................................................36
Management | Account .................................................................................................36
Management | Device Setting .......................................................................................38
Management | Time Settings ........................................................................................39
Management | Restore Default.....................................................................................40
Management | Software................................................................................................41
Monitoring..............................................................................................................................43
Management | Status ....................................................................................................44
Management | Iperf.......................................................................................................46

3
Management | Diagnostic Tools....................................................................................47
About......................................................................................................................................48
Specification ...................................................................................................................................49

4
Introduction
Product Overview
1. Power Input
2. Power on/off Switch
3. LAN Port
4. USB Port (Reserve)
5. WPS Button
6. Nano Sim Card Slot
7. Reset Button (Press 5 sec for Reset to Default)

5
LED Indicators
LED
Indication
Icon
LED
Status
Description
Power
ON Power ON
OFF Power OFF
WiFi
2.4GHz
ON 2.4GHz Wi-Fi ON
Blinking Transmitting data
OFF 2.4GHz Wi-Fi OFF
WiFi
5GHz
ON 5GHz Wi-Fi ON
Blinking Transmitting data
OFF 5GHz Wi-Fi OFF
WPS
Blinking WPS pairing (2min duration)
ON WPS paired. (LED off after 5 sec)
Off No WPS
SIM/4G signal
strength
Blue LED
On
Good Signal
Purple LED On Medium Signal
Red LED
On
Weak Signal
Red LED Blanking No SIM detect
5G signal
strength
(Primary cell)
Blue LED
On
Good Signal
Purple LED On Medium Signal
Red LED
On
Weak Signal
No LTE
Connection The LEDs of 4G & 5G are both off
Firmware
Upgrade All LEDs in chasing pattern with blue color
Reset All LEDs blinking with Blue color

6

7
Installation
Please follow the steps below to install the router:
Step 1. Insert SIM card into the router with instructions shown below until it clicks.
Step 2. Connect one of the LAN ports (any port will do) on the router to your PC with a RJ-45
Ethernet cable provided.
Step 3. Insert the power cord into the DC-12V power jack of the router; and insert the plug into
the power outlet.
Step 4. Switch the power ON. The router will start the booting process. After a few seconds, the
LED lights will start blinking.
Step 5. When the router has booted up, you will see the following LED lights on in solid color: the
WiFi 2.4GHz, WiFi 5GHz, LTE and 5G. You can now connect your device to the router via an
ethernet cable or over WiFi. The network name (SSID) and password (key) can be found on the
label underneath the router.
Note:
1. To remove the SIM card, please press the card in until it clicks and it will pop out automatically.
2. Do not remove the SIM card when the router is operating.

8
Web Interface
Login to Web-GUI
Users’ devices are assumed in CPE LAN side. Please follow the steps below to configure your
device through the web interface:
Step1: Open the Web browser (Ex: Internet Explorer, Firefox or Chrome) and enter the
default IP address of CPE, which is : http://192.168.15.1
Web browser
Step2: Enter USERNAME/PASSWORD to access the web management interface. The
default USERNAME/PASSWORD is admin/admin.
Web management interface

9
Step3: After successful login, you can see “Brief Summary Page”. Brief Summary Page is
composed of many blocks and each block contains its own feature. A concise
description is presented in the block. Users can click on it to enter “Detailed
Configuration Page” to see the complete settings or tweak the configuration.
Detailed information about this page will be stated belo
Brief Summary Page
Brief Summary Page
After
you’ve opened up GUI page, the first page you see is “Brief Summary Page”. This
window
shows
all the current settings and system information. It gives you an overview of the
current
status of your device.
After login, users can see a “Brief Summary Page” about all functions of FGW3000, each
block is a link to “
Detailed Configuration Page”.
(Ex: Click “
Network”, you can go to “Network” main menu with sub-menu like WAN Setting or Port
Management and other settings about Network)

10
Detailed Configuration
Detailed Configuration Page
After clicking any block in “Brief Summary Page”, the webpage would be switched to the
“Detailed Configuration Page”. (Take“Mobile Network” block for example)
Main Menu Show the current main menu
Sub Menu Clickable, can jump to another Sub Menu under the same Main Menu

11
Menu Structure
After entering “Detailed Configuration Page”, the user can quickly jump to the specified Sub
Menu.
Users can refer to the menu structure given below:
Mobile Network PIN
WiFi Status
Settings
Network
Status
WAN Setting
LAN Setting
Port Management
IPv6 Status
Settings
Firewall
Basic
Access Restriction
Management
Account
Device Setting
Time Settings
Restore Default
Software
Monitoring
Status
Iperf
Diagnostic Tools
About Status

12
Mobile Network | PIN
Mobile Network>PIN
Mobile Network >PIN >Enable PIN
Mobile Network >PIN > Change PIN

13
Enable PIN: Enable/Disable PIN code protection.

14
If users want to change the PIN code of SIM card, they need to enable
“Enable PIN code check” function in advance.
Remaining Attempts is just an example.
Real number is determined by user's SIM card.
If you enter wrong PIN more than three times (maximum numbers of
attempts allowed), your SIM card will become “PUK-locked” status.
Please contact your service provider for further unlock instruction.
Please make sure the current technology is 5G. It can be checked from
upper left corner of Web-GUI.
Change PIN: Change the PIN code.
Remaining Attempts: remaining times to try PIN code.
Cancel button Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.

15
Menu Structure:
Display in Brief Summary Page
WiFi
In WiFi main menu, you can display and configure settings about WiFi. Users can see SSID,
current channel and working mode as well as configure wireless setting, security and access
control list
WiFi Status
Settings

16
WiFi | Status
WiFi> Status
State: Possible states are ON and OFF.
ON: WiFi is on.
OFF: WiFi is off.
Radio Channel: The channel used by CPE.
Working Mode: This sows the working mode you designate in WiFi->Setting.
WiFi MAC: As titled.
Network Name (SSID): As titled.
SSID Broadcast: As titled.
Refresh button
Click the “Refresh” button to trigger refresh manually.
Auto button
This button will update the status information periodically.
(The period can be configured by changing “
GUI Refresh
Time”in page Management/Device Setting)
Radio channel, WiFi MAC and Network Name (SSID) are all examples
here.

17
WiFi | Settings | WiFi 2.4GHz
WiFi> Settings>WiFi 2.4GHz
Wireless Settings
Interface Status: Click “Disable” button to disable WiFi, or click “Enable” to activate WiFi
function.
Network Name (SSID): SSID (service set identifier) is a label representing wireless AP. Wireless
clients would see the SSID broadcasted by AP.
Radio Channel: The channel to use. Selecting “Auto” will allow CPE to choose the best channel
automatically.
To avoid the interference , “Radio Channel” will be automatically
changed due to the selected “LTE Band”
Working Mode: There are “802.11axg”, “802.11b/g”, “802.11g/n”, “802.11b”, “802.11g”.
Bandwidth: The setting is only available when the wireless protocol is used; select the
bandwidth from the drop-down list.
•20M – Set the bandwidth to 20M.
•40M – Set the bandwidth to 40M.
•20M/40M – The bandwidth setting will automatically be switched to either 20M or 40M by
CPE based on the environment.
SSID Broadcast: Having SSID broadcast disabled essentially makes your CPE invisible unless a
wireless client already knows the SSID. The default option of SSID Broadcast is “Enabled”.
AP Isolation: Enable or disable AP Isolation feature

18
Security
Security Types Setup: There are 10 different security types provided as below –
Authentication
Encryption
Open Systems
NONE
802.1x WEP
802.1x Settings -
Rekey Interval
RADIUS Server
RADIUS Port
RADIUS Key
WPA3-Personal CCMP
Pre-shared Settings -
Key Pass Phrase
WPA2-Personal
AES
TKIP
TKIP/AES
CCMP
TKIP/CCMP
Pre-shared Settings -
Rekey Interval
Key Pass Phrase
Wi-Fi Protected Setup(WPS)–
Enable WPS
WPA-Personal
AES
TKIP
TKIP/AES
CCMP
TKIP/CCMP
Pre-shared Settings -
Rekey Interval
Key Pass Phrase
Wi-Fi Protected Setup(WPS)–
Enable WPS (only for AES and TKIP/AES.)
WPA2/WPA3-Personal
Mixed Mode
CCMP
Pre-shared Settings -
Key Pass Phrase
WPA/WPA2-Personal
Mixed Mode
TKIP/AES
TKIP
AES
Pre-shared Settings -
Rekey Interval
Key Pass Phrase
Wi-Fi Protected Setup(WPS)–
Enable WPS (only for AES and TKIP/AES.)
WPA2-Enterprise
TKIP/AES
TKIP
AES
802.1x Settings -
Rekey Interval:
RADIUS Server
RADIUS Port
RADIUS Key

19
WPA-Enterprise
TKIP
AES
TKIP/AES
802.1x Settings -
Rekey Interval:
RADIUS Server
RADIUS Port
RADIUS Key
WPA/WPA2-Enterprise
Mixed Mode
TKIP
AES
TKIP/AES
802.1x Settings -
Rekey Interval:
RADIUS Server
RADIUS Port
RADIUS Key
Wi-Fi Protected Setup(WPS)
Enable WPS: User can share their WiFi via WPS when this box is checked.
Access Control List: Users can block or allow clients with certain MAC addresses to access to CPE.
Disable: Any clients can establish the connection.
WhiteList: Only clients with MAC addresses in “Access Control List” can establish the
connection, other clients will be blocked.
BlackList: Only clients with MAC addresses in “Access Control List” will be blocked, other
clients can establish the connection.
Cancel button
Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.
If you select “WhiteList” and have no MAC address in the list, no one
can establish the connection.

20
WiFi | Settings | WiFi 5GHz
WiFi> Settings>WiFi 5GHz
Wireless Setting
Interface Status: Click “Disable” button to disable WiFi, or click “Enable” to activate WiFi
function.
Network Name (SSID): SSID (service set identifier) is a label representing wireless AP. Wireless
clients would see the SSID broadcasted by AP.
Radio Channel: The channel to use. Selecting “Auto” will allow CPE to choose the best channel
automatically.
Working Mode: There are “802.11axa”, “802.11a/n”, “802.11ac”, or “802.11a”
Bandwidth: Select the bandwidth from the drop-down list.
•20M – Set the bandwidth to 20M.
•40M – Set the bandwidth to 40M.
•80M – Set the bandwidth to 80M.
•20M/40M/80M– The bandwidth setting will automatically be switched to either 20M or
40M or 80M by CPE based on the environment.
SSID Broadcast: Having SSID broadcast disabled essentially makes your CPE invisible unless a
wireless client already knows the SSID. The default option of SSID Broadcast is “Enabled”.
AP Isolation: Enable or disable AP Isolation feature
Security
Security Types Setup: There are 10 different security types provided as below –
Authentication
Encryption