Linksys WRH54G Original operating instructions

Model No.
Quick Installation
Model No.
Wireless
EConnect the AC power adapter to the Router's Power port and the
other end into an electrical outlet. Only use the power adapter sup-
plied with the Router. Use of a different adapter may result in product
damage.
FOpen your web browser and enter the Router’s default IP address,
http://192.168.1.1, in the Address field. Then press Enter.
GThe Utility’s Welcome screen will appear. Click the Setup Wizard but-
ton to run the Setup Wizard and follow the on-screen instructions.
Note: If the screen doesn’t appear, refer to Windows Help to see if your
PC’s TCP-IP is set up with Obtain an IP address automatically.
Home Router
Wireless-G
AInsert the Setup CD into your CD-ROM drive.
BThis Welcome screen will appear on your monitor.
Click the Click Here to Start button.
WRH54G
Start Here
for Setup and Connection
Package Contents
• Wireless-G Home Router
• Setup CD-ROM
• User Guide on CD-ROM
• Power Adapter
• Ethernet Network Cable
• Quick Installation Guide
• Use this guide for first time
setup of your Router.
• Setup Wizard requires a PC
with Microsoft Windows 98SE,
Me, 2000, XP or Vista and a
broadband Internet connec-
tion.
For advanced configuration, refer to the User Guide
on the CD-ROM.
There are two ways to set up and configure the Router. Choose one :
•Set up the Router with the Setup Wizard from the Web Utility, Step 1.
OR
•Run the Setup Wizard from the CD-ROM, Step 2.
APower down your network devices.
BLocate an optimum location for the Router. The best place for the
Router is usually high up and at the center of your wireless network.
Adjust the antenna so it is straight up in the air.
CConnect a standard Ethernet network cable to the Router’s Internet
port. Then, connect the other end of the Ethernet cable to your cable
or DSL broadband modem.
DConnect your network PCs or Ethernet devices to the Router’s num-
bered ports using standard Ethernet network cabling.
IMPORTANT: Make sure you use the power adapter that is supplied
with the Router. Use of a different power adapter could damage the
Router.
1
2
Web Setup Wizard
CD-ROM Setup Wizard

DWhen you are finished connecting the Router, this screen will
appear while your Internet connection and Router are being
detected. When the next screen appears, continue with the
steps on the Setup Wizard and follow the on-screen instruc-
tions.
EWhen you have successfully finished setting up the Router, this
screen will appear.
Congratulations. Setup is complete.
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in
the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved.
WRH54G_V10_QI_71126NC AI
For additional information or troubleshooting help, refer to the User Guide on the Setup CD-ROM. You
can also call or email for further support.
Technical Support 1 800 326 7114 (US)
Web Site http://www.linksys.com
Support Site http://www.linksys.com/support
CFollow the steps on the Wizard, as shown below.
Dealer Sales Person Name:
Dealer Name:
Product Model No:
Serial No:
Purchase Date:
Dealer Stamp