Lippert Components Reel Away Installation instructions

1
lci1.com 574-537-8900 CCD-0001717 Rev: 08.02.18
Reel Away™
(cord reelers)
Installation and Owner’s Manual
(For Aftermarket Application)
Table of Contents
Introduction .................................. 1
Features ................................... 1
Safety Information ............................. 1
Resources Required .......................... 1
Reel Away Options ............................ 2
Installation ................................... 2
Operation .................................... 3
Standard Reel Away ......................... 3
Deluxe Reel Away .......................... 3-4
Notes ......................................... 4
Introduction
The LCI Reel Away™cord reeler is the latest product in
the RV industry designed to easily store 30 or 50 amp
power cords. The Reel Away can be easily installed on the
oor of any storage compartment, screws provided! This
convenient storage solution frees up storage space and
provides a simple way to use and store power cords.
Features
• The Standard Reel Away stores cords up to 36 feet in length.
• The Deluxe Reel Away stores cords up to 50 feet in length.
• Mounted for left- or right-handed operation.
• Powder coated steel construction.
• Convenient way to store power cords.
Safety Information
Resources Required
• Cordless or Electric Drill or Screw Gun
• Appropriate Drive Bits
FAILURE TO FOLLOW THE INSTRUCTIONS
PROVIDED IN THIS MANUAL MAY RESULT IN DEATH,
SERIOUS INJURY, UNIT DAMAGE, OR VOIDING OF
THE COMPONENT WARRANTY.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
Reel Away™
(cord reelers)
Installation and
Owner’s Manual
(For Aftermarket Applications)

2
lci1.com 574-537-8900 CCD-0001717 Rev: 08.02.18
Reel Away™
(cord reelers)
Installation and Owner’s Manual
(For Aftermarket Application)
Installation
Reel Away Options
1. Locate the four provided wood screws.
2. Locate the four pre-drilled mounting holes on the Reel
Away (Fig.1A and Fig.2A).
3. Fasten the Reel Away to the surface using the four
provided screws.
NOTE: The four screws are intended for fastening the
Reel Away to a wood surface only. A minimum of ¾"wood
surface is recommended.
NOTE: If the surface is not wood, contact unit
manufacturer for installation recommendations.
C
A
A
A
Letter Part # Description
A677584 Reel Away Standard
B677583 Reel Away Deluxe S
C677582 Reel Away Deluxe T
MAKE SURE TO HAVE SUFFICIENT BACKING MATERIAL
BEFORE FASTENING REEL AWAY TO THE UNIT.
Fig.1
A
A
A
Fig.2
A
B

3
lci1.com 574-537-8900 CCD-0001717 Rev: 08.02.18
Reel Away™
(cord reelers)
Installation and Owner’s Manual
(For Aftermarket Application)
Operation
Standard Reel Away
Storing Detachable Cord
1. Feed the cord into the center opening (Fig.3A) on the
spooler with the socket end rst.
2. Slide the socket end of the cord to the left or right. Turn
the handle clockwise while guiding the cord.
Removing Detachable Cord
1. Remove the cord completely by pulling it out of the Reel
Away.
2. If the cord gets caught, guide the cord back through
the Reel Away by turning the handle clockwise and
counterclockwise until the cord is free. Continue to remove
the cord.
Fig.3
A
Storing Hard Wired Cord
1. Feed the cord into the center opening (Fig.3A) on the
spooler with the plug end rst.
2. Slide the plug end of the cord to the left or right.
Turn the handle clockwise while guiding the cord.
Removing Hard Wired Cord
1. Pull the cord completely out of the Reel Away to access
the plug end.
If the cord gets caught, guide the cord back through the
Reel Away by turning the handle clockwise and counter-
clockwise until the cord is free. Continue to remove the cord.
Deluxe Reel Away
Storing Detachable Cord
1. Turn the tension adjustment knob (Fig.4A)
counterclockwise to allow the reel to move freely.
2. Feed the cord into the center opening (Fig.5A) on the
spooler with the socket end rst.
3. Slide the socket end of the cord to the left or right.
Turn the handle clockwise while guiding the cord.
4. When complete, make sure to lock the Reel Away by
turning the tension adjustment knob (Fig.4A) clockwise.
This prevents the cord from unwinding.
Removing Detachable Cord
1. Make sure the tension adjustment knob (Fig.4A) is kept
tight while removing the cord. Remove the cord completely
by pulling it out of the Reel Away.
NOTE: If the tension adjustment knob (Fig.4A) is not kept
tight, the cord can get caught in the Reel Away when it is
pulled out and damage to the product may occur.
2. If the cord gets caught, guide the cord back through
the Reel Away by turning the handle clockwise and
counterclockwise until the cord is free. Continue to remove
the cord.

4
lci1.com 574-537-8900 CCD-0001717 Rev: 08.02.18
Reel Away™
(cord reelers)
Installation and Owner’s Manual
(For Aftermarket Application)
Manual information may be distributed as a complete
document only, unless Lippert Components provides
explicit consent to distribute individual parts.
All manual information is subject to change without
notice. Revised editions will be available for free
download at lci1.com. Manual information is considered
factual until made obsolete by a revised version.
Please recycle all obsolete materials and contact
Lippert Components with concerns or questions.
A
Storing Hard Wired Cord
1. Turn the tension adjustment knob (Fig.4A)
counterclockwise to allow the reel to move freely.
2. Feed the cord into the center opening (Fig.5A) on the
spooler with the plug end rst.
3. Slide the plug end of the cord to the left or right.
Turn the handle clockwise while guiding the cord.
4. When complete, make sure to lock the Reel Away by
turning the tension adjustment knob (Fig.3A) clockwise.
This prevents the cord from unwinding.
Removing Hard Wired Cord
1. Make sure the tension adjustment knob (Fig. 4A) is kept
tight while removing the cord. Pull the cord completely out
of the Reel Away to access the plug end.
NOTE: If the tension adjustment knob (Fig. 4A) is not kept
tight, the cord can get caught in the Reel Away when it is
pulled out and damage to product may occur.
2. If the cord gets caught, guide the cord back through
the Reel Away by turning the handle clockwise and
counterclockwise until the cord is free. Continue to remove
the cord.
Fig.5
Fig.4
A
Notes