1110
1|SAFETY GUIDELINES
1.1
GENERAL
ATTENTION! Please read the following instructions carefully.
This manual is an extension to the printed DIN A6 flyer for „startup &
maintenance“ that comes with your LITE BLOX battery. It is part of the
product and contains important notes for correct handling &
maintenance. Therefore please make sure to store this document at a
safe place in order to have it at hand at all times in cases of uncertainties
and when the product is passed on.
1.
ADVICES
Please pay close attention to the following advices in order to ensure an immaculate
operation at any time for maximum product life:
• Refer to this manual for appropriate installation, maintenace & charging.
• Do not remove the LITE BLOX battery from its original packaging until required for use.
• Always keep your LITE BLOX clean and dry.
• Only use as starter battery on common automotive alternators.
• Pay attention to the plus (+) & minus (–) marks on the LITE BLOX battery as well as on the
peripherals to ensure correct use at any time.
• Do not short circuit your LITE BLOX & treat as described in this manual.
• Only use appropriate chargers, validated for Lithium Iron Phosphate batteries (LiFePO4).
• Do not mix batteries of dierent manu facture, capacity, size or type in one application.
• Never leave your LITE BLOX plugged to a battery charger without attendance.
• Never charge your LITE BLOX at an environment temperature below - 0°C.
• Disconnect from the vehicles peripherals when not in use for longer sitting periods.
• Recharge on extended storage periods (>150days when fully charged).
• Do not dismantle, crush, puncture, open or shred your LITE BLOX.
• Do not expose your LITE BLOX to heat or fire. Avoid exposure to direct sunlight.
• In the event of a chemical reaction of the battery cells, avoid contact with skin or eyes.
