
10
1Please contact the manufacturer’s service: www.litex.pl
Control activities Check the canopy Check the handle for unfolding the
canopy and the locking bar Check the frame for damages
Problem solution In case of damage replace the
sheathing1
In case of damage change the
string1
In case of damage replace the
frame1
Control activities
Check the connection between the
mast tube and the square prole
of the telescope at the top of the
frame
Check the stability of parasol base Check visually the parasol technical
condition
Problem solution If damaged, replace the frame1If damaged, replace the damaged
part1Replace the damaged part
8. Maintenance and care
The customer should carry out a thorough inspection of the parasol using the list below, after the rst installation
or before storing the parasol. Do not use any sharp tools such as knives or metal scrapers or caustic cleaners to
clean the parasol. Do not use water garden hoses or high pressure cleaners when cleaning.
Canopy / Textile:
- Do not chemically clean the canopy / fabric,
- Water wash by hand - lightly squeeze,
- Surface wash - lightly rub heavily soiled areas with a wet sponge. Washing temperature-maximum 40°C,
- Type of washing agent - light washing agents for coloured products, e.g. grey soap,
- Draining and drying - do not twist, dry upright hanging in the open air at 19 - 25 degrees Celsius,
- Do not use organic or chemical solvents and do not chlorinate,
- Keep away from open ames. In case of arson, extinguish with water, powder or snow extinguisher.
Frame construction elements:
- Clean with a damp cloth soaked in soapy water or washing-up liquid. To remove dust, dirt and other
contaminants deposited on the structure.
- Before the start of the summer season it is recommended to maintain the mast tube on which the parasol
opening mechanism moves. The mast tube should be cleaned with a cloth soaked in benzine (do not use on
plastic parts) and then a thin layer of silicone oil should be applied to make the mechanism work easier.
Removing the sheathing:
Necessary tools: phillips screwdriver
STAGES:
- Detach the Velcro fasteners from the main frame arms.
- Remove the pockets securing the sheathing to the frame on the long arms.
- Unscrew the straps securing the sheathing to the frame on the short arms.
- Remove the sheathing.
Putting the sheathing on is carried out in reverse order.
Annual maintenance:
The customer should carry out a thorough inspection of the parasol using the list below, after the rst assembly
or before storing the parasol for a long time.