Little Seeds Haven 4540013COM User manual

inside for Assembly Manual
Check us out!
lileseedskids.com
B344540013COM00PK
102020PK

Haven 6 Drawer Dresser White
4540013COM
2
Do NOT return this product!
For missing or broken parts
- Visit lileseedskids.com
- Call 1-800-489-3351
Two Adults
recommended
for assembly This product is not intended for commercial use
Keep this Assembly Manual for future reference
Follow lile seeds on

lileseedskids.com 3
Visit lileseedskids.com to view the
limited warranty valid in the U.S and Canada
Helpful Hints
Do NOT return this product!
Contact our friendly customer service team rst for help
Assembly Tips
- Open your item in the area you plan to keep it for less heavy liing
- Idenfy, sort and count the parts before aempng assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (le) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
PEOPLE NEEDED FOR ASSEMBLY: 2
ESTIMATED ASSEMBLY TIME: 30 MINUTES

lileseedskids.com 4
Before You Start
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cauon: If using a power drill or power screwdriver for screwing,
please beware to slow down and stop when screw is ght. Failure
to do so may result in stripping the screw,
1
3
2
4

lileseedskids.com 5
x1
T4540013010PK
TOP PANEL
x1
T4540013040PK
RIGHT SIDE PANEL
x2
T4540013070PK
BRACE RAIL
x1
T4540013020PK
BOTTOM PANEL
x1
T4540013050PK
PARTITION
x3
T4540013080PK
LEFT DRAWER FACE
x1
T4540013030PK
LEFT SIDE PANEL
x1
T4540013060PK
TOP RAIL
x3
T4540013090PK
RIGHT DRAWER FACE
1 2
5
4
87
3
6
9
Board Idencaon
Not actual size

lileseedskids.com 6
x6
T4540013100PK
LEFT DRAWER SIDE
x6
T4540013110PK
RIGHT DRAWER SIDE
10 11
Board Idencaon
Not actual size
x6
T4540013130PK
DRAWER BOTTOM
x1
T4540013160PK
SUPPORT LEG
x6
T4540013140PK
DRAWER SUPPORT
x6
T4540013120PK
DRAWER BACK
x1
T4540013150PK
BACK PANEL
14
13
16
12
15

lileseedskids.com 7
Part List
Not actual size
x15
TPK0004
DOWEL 8 X 30
x46
TPK0001
Cam Bolt
x46
TPK0002
Cam Lock 15-9
x36
TPK0008
CBS 4 x 38
x84
TPK0007
CBS 3.5 x 16
x12
TPK3006
HANDLE SCREW
x1
TPK2004
ANTI TIPPING KIT
x6
TPK1004
DRAWER SLIDE 350 MM
24540013COM0PK
Hardware Bag Reference Number:
x6
TPK3001
HANDLE
x20
TPK0015
NAIL

lileseedskids.com 8
Proper orientaon of CAM LOCK
Step 1
4
5
3
x8
TPK0001
Insert hardware as shown below.
x8
TPK0002 x8
TPK0004

lileseedskids.com 9
Step 2
 
x3
TPK1004
x24
TPK0007
Insert hardware as shown below.
4
3

lileseedskids.com 10
Step 3

number 5.

number 5.
x3
TPK1004
x24
TPK0007
Insert hardware as shown below.
“Le Face”
“Right Face”
5
5

lileseedskids.com 11
Proper orientaon of CAM LOCK
Step 4
1
x4
TPK0002 x3 TPK0004
x8
TPK0001
Properly insert Cam Lock
and dowel.
X 2
7
6
x1
TPK2004

lileseedskids.com 12
Step 5
Important!,
Please make sure bigger
hole facing outside.

the panels using provided screws.
x4
TPK0008
1
6

lileseedskids.com 13
Proper orientaon of CAM LOCK
Step 6
x4
TPK0002
Properly insert Cam Lock and dowel.
2
x4
TPK0004

lileseedskids.com 14
Step 7
2
5

the panels using provided screws
x2
TPK0008

lileseedskids.com 15
Step 8


2
4

lileseedskids.com 16
Step 9


5
4
7
7
9.1
9.2

lileseedskids.com 17
Step 10
3
2


7

lileseedskids.com 18
Step 11
1
3


cam lock.

lileseedskids.com 19
Step 12
4



x20
TPK0015


corner in same dimension. Spread evenly the
iron nails.
15
16

lileseedskids.com 20
Proper orientaon of CAM LOCK
Step 13
x30
TPK0002
x30
TPK0001
Properly insert Cam Lock.
X 3
X 3
X 6
X 6 X 6
8
9
10
11 14