livecookintable 13234 User manual

Front blind for Table Professional
Assembly and operating instructions

2
Contents
Using assembly and operating instructions 3
Observing basic rules 3
Understanding and heeding warnings 3
Observing useful hints 3
Observing the appropriate document 3
Using the front blind correctly 4
Assembly 4
Finished 4
Disassembly 5
Cleaning and care 5
Disposal 5
Technical data 6
Front blinds for frame size no. 4 6
Front blinds for frame size no. 5 6

3
Using Assembly and operating instructions
Observing basic rules
Before assembling and using the "product name" product:
Read this manual "document type" carefully and fully.
Ask the manufacturer if there is something you do not understand.
Keep the manual close at hand.
If you are not sure about a work step, consult the manual.
Also observe the manuals of the accessories.
Understanding and heeding warnings
DANGER symbol
WARNING symbol
CAUTION symbol
ATTENTION symbol
Indicates an immediate
threat of danger.
Failure to observe the i
n-
struction to avert the danger
can result in death or severe
injury.
Indicates a possible threat of
danger.
Failure to
observe the in-
struction to avert the danger
can result in death or severe
injury.
Indicates a possible threat of
danger.
Failure to observe the i
n-
struction to avert the danger
can result in slight or minor
injury.
Indicates a possibly dan-
gerous situatio
n for the
product or its environment.
Failure to observe the i
n-
struction can result in da
m-
ages.
Observing useful hints
INFORMATION symbol
CROSS REFERENCE sym-
bol
TIP symbol
Indicates useful
information for a
better understanding.
Indicates a cross
reference to another
chapter or another
document.
Indicates a tip, e.g. to make
work easier.
Observing the appropriate document
This document is a supplement to the assembly
and operating instructions for the Table Profes-
sional.
It is essential that you also read the appro-
priate assembly and operating instructions
enclosed with the Table Professional.

4
Using the front blind correctly
The front blind is a supplement to the Professional livecookintable. It covers the front of the table.
Any other use is contrary to the intended use.
Assembly

Aax0226a.eps.jpg

Aax0227a.eps.jpg
Finished

Aax0253a.eps.jpg

5
Disassembly

Aax0257a.eps.jpg
Cleaning and care
Clean the front blind after every use.
Dry the front blind after cleaning.
Work material Soft sponges, cloths
Cleaning agents
Soap, detergent, commercially available glass cleaners
Disposal
At the end of the life cycle: Dispose of the front blind according to regional regulations.
The front blind is made of PETG.

6
Technical data
Front blinds for frame size no. 4
Art. No.
Article Length Height
Thick-
ness Weight
Usage
with AirWall without AirWall with side blinds without side blinds
13234
Front blind SET 4 Airwall
1,466 mm
520 mm
4mm
3.6 kg
X
X
13224
Front blind SET 4
1,466 mm
789 mm
4mm
5.6 kg
X
X
13214
Front blind SOLO 4 Airwall
1,540 mm
520 mm
4mm
3.8 kg
X
X
13204
Front blind SOLO 4
1,540 mm
789 mm
4mm
5.8 kg
X
X
Front blinds for frame size no. 5
Art. No.
Article Length Height
Thick-
ness Weight
Usage
with AirWall without AirWall with side blinds without side blinds
13235
Front blind SET 5 Airwall
1,854 mm
520 mm
4mm
4.6 kg
X
X
13225
Front blind SET 5
1,854 mm
789 mm
4mm
7.0 kg
X
X
13215
Front blind SOLO 5 Airwall
1,928 mm
520 mm
4mm
4.8 kg
X
X
13205
Front blind SOLO 5
1,928 mm
789 mm
4mm
7.3 kg
X
X

Sales
MEC2 GmbH
Grossglocknerstrasse 17
D 65199 Wiesbaden
Phone
[phone]
E-mail
Internet
[email protected]
www.mec2.de
Copyright
2013 MEC2 GmbH
This document is protected by copy-
right and may not be reproduced or
published without written permission.
Subject to change
Subject to technical modifications.
Edition
02/2013
Document No.
AAX0252C.DOCX