LIVING ELEMENTS Clever Cube Compact 423291 User manual

  (12mm)

Assembled Size: 610mm High x 310mm Wide x 295mm Deep. Internal Cube Size: 285mm High x 285mm Wide x 295mm Deep
The only tools you require are an Allen key (supplied in Hardware Kit) and a small hammer
LIST OF S
x1 x2 x2 x1
 

x12
•This product contains small parts.
Hardware Kit
 
x10 x1
'
0 G
x10 x10
Hints:  
STEP 1
Note: Ensure all raw edges face UP.
This will be the back of the unit.
e·
STEP2


x2



x2
0
STEP3



x8
  (12mm)

Assembled Size: 610mm High x 310mm Wide x 295mm Deep. Internal Cube Size: 285mm High x 285mm Wide x 295mm Deep
The only tools you require are an Allen key (supplied in Hardware Kit) and a small hammer
LIST OF S
x1 x2 x2 x1
 

x12
•This product contains small parts.
Hardware Kit
 
x10 x1
'
0 G
x10 x10
Hints:   
STEP 1
Note: Ensure all raw edges face UP.
This will be the back of the unit.
e·
STEP2


x2



x2
0
STEP3



x8
1 x 2 Compact Cube
ASSEMBLY INSTRUCTIONS
F
x2
G
x4




IMPORNT:

SUGGESTION:
10 nails per back panel,
positioned evenly around edge
as shown.
T
l l
T l
l l l
0
0
NOTE:
Place nails towards the centre
of the edge of the panel
to avoid splitting
ATTACH BACK PANEL:
PUSH:
To ensure all joints
are even and unit
is square
PUSH



IMPORNT:

SUGGESTION:
10 nails per back panel,
positioned evenly around edge
as shown.
T
l l
T l
l l l
0
0
NOTE:
Place nails towards the centre
of the edge of the panel
to avoid splitting



IMPORNT:

SUGGESTION:
10 nails per back panel,
positioned evenly around edge
as shown.
T
l l
T l
l l l
0
0
NOTE:
Place nails towards the centre
of the edge of the panel
to avoid splitting



IMPORNT:

SUGGESTION:
10 nails per back panel,
positioned evenly around edge
as shown.
T
l l
T l
l l l
0
0
NOTE:
Place nails towards the centre
of the edge of the panel
to avoid splitting



IMPORNT:

SUGGESTION:
10 nails per back panel,
positioned evenly around edge
as shown.
T
l l
T l
l l l
0
0
NOTE:
Place nails towards the centre
of the edge of the panel
to avoid splitting
living-elements.co.uk
1 x 2 Compact Cube
ASSEMBLY INSTRUCTIONS
WARNING: TO AVOID THE RISK
OF STORAGE TIPPING OVER,
PLEASE ATTACH WALL MOUNT
SUPPLIED TO THE PRODUCT
AND WALL AS SHOWN.
As wall materials vary, screws for
xing to wall are not included.
For advice on suitable screw
system, contact your local dealer.
WALL
x2
x4
F
G