Living Fire Paul Agnew Designs ilektro Series User manual

Living Fire
361 Swan Street Richmond
VIC 3121 - Australia
Copyright © 2019 Living Fire
QUICK START
GUIDE

HEAT SETTINGS
PRESS THE RH MENU BUTTON TO SELECT THE
HEAT CONTROL
PRESS THE LH MENU BUTTON TO SWITCH
BETWEEN THE 3 MODES:
• MODE 1 MANUAL
• MODE 2 THERMOSTATIC
• MODE 3 7 DAY TIMER
MANUAL MODE
THE HEAT SETTING IS INDICATED BY A RED BAR.
ADJUST HEAT BY ROTATING FINGER ON
THE TOUCH DIAL. CLOCKWISE INCREASES
THE TEMPERATURE AND ANTI CLOCKWISE
DECREASES THE TEMPERATURE UNTIL HEAT IS
TURNED OFF.
THERMOSTATIC MODE
WHEN SET IN THERMOSTATIC MODE JUST A
TEMPERATURE IS DISPLAYED ON SCREEN.
ROTATE TOUCH DIAL CLOCKWISE TO INCREASE
TEMPERATURE SETTING AND ANTI-CLOCKWISE
TO DECREASE TEMPERATURE SETTING. THE
HEATER WILL AUTOMATICALLY MAINTAIN THE
SET TEMPERATURE.
7 DAY TIMER
IN 7 DAY TIMER MODE THE CURRENT
TEMPERATURE AND THE NEXT TIME AND
TEMPERATURE ,IS DISPLAYED, SEE MENU
SETTINGS.
CURRENT SETTING
RH MENU BUTTON
CURRENT SETTING

TO ADJUST THE LIGHT EFFECT
SELECT ‘EFFECT’ SETTING WHILE IN LIGHT
MODE.
THE LH MENU BUTTON WILL SWITCH THE
EFFECT ON.
ROTATING THE DIAL OR PRESSING THE MENU
BUTTONS WILL EXIT THE EFFECT MODE. THE
EFFECT MODE IS INDICATED BY A DASHED BAR,
THE LIGHT LEVEL IS INDICATED BY A SOLID
BAR.
TO ADJUST THE FUEL AND FLAME
COLOUR
PRESS THE LH MENU BUTTON TO SELECT THE
COLOUR OPTION
ROTATE THE TOUCH DIAL TO CHOOSE YOUR
COLOUR
HOW TO USE YOUR APPLIANCE
OPERATING INSTRUCTIONS
LEVEL
CURRENT SETTING
IMPORTANT
THIS DOCUMENT IS FOR STARTING
GUIDELINES ONLY
PLEASE READ THE FULL INSTRUCTION
MANUAL
THE HEATER OUTLET GRILLE BECOMES
VERY HOT WHILST IN OPERATION.
DO NOT COVER THE OUTLET GRILLE OR
ANY PART OF THE APPLIANCE.
FOR USE WITH 230V - 240V 50HZ
ELECTRICITY SUPPLY ONLY.
PLEASE READ THE FULL INSTRUCTIONS
CAREFULLY BEFORE INSTALLATION
KEEP THE INSTRUCTIONS IN A SAFE
PLACE.
THEY WILL BE NEEDED WHEN
MAINTENANCE OR SERVICING IS
REQUIRED.
THIS APPLIANCE MUST BE EARTHED
THIS GUIDE COVERS THE FOLLOWING
MODELS ONLY:
750L, 750A, 750S, 950L, 950A 950S
1250 L,1250S, 1650 L, 2000 L
A - ASPECT
L - LANDSCAPE
S - SUITE

- WARNING -
PARTS OF THE PRODUCT
MAY GET HOT DURING
OPERATION
TO TURN THE APPLIANCE ON I/O
OPERATE THE STANDBY SWITCH
LOCATED ON THE RIGHT HAND
SIDE UNDER THE FRONT TRIM, HERE ON YOUR
APPLIANCE:
THE FLAME EFFECT CAN BE TURNED ON/OFF
USING THE REMOTE. WHEN THE FLAME EFFECT
IS OFF THE APPLIANCE REMAINS IN STANDBY.
THE APPLIANCE CAN BE OPERATED BY THE
RADIO FREQUENCY HANDSET ONLY.
THE FOLLOWING FUNCTIONS CAN BE
CONTROLLED USING THE REMOTE HANDSET:
• ON/OFF - FLAME EFFECT
• HEAT SETTINGS
• BRIGHTNESS OF THE FUEL AND FLAME
EFFECT
• FLAME DUO COLOUR
• FUEL BED COLOUR
• THE FLAME EFFECT CAN BE TURNED OFF
USING THE REMOTE,
• RETURNING THE APPLIANCE TO STANDBY.
IF YOU DO NOT USE THE APPLIANCE AND
HANDSET FOR 2 MINUTES THE HANDSET WILL
GO WILL GO INTO SLEEP MODE. PRESS THE
POWER BUTTON TO REACTIVATE.
TURN THE APPLIANCE ON AND OFF BY USING
THE REMOTE HANDSET. PRESS THE POWER
BUTTON TO EXIT SLEEP MODE. ONCE OUT
OF SLEEP MODE PRESS THE POWER BUTTON
AGAIN TO TURN ON.
TURNING ON THE APPLIANCE
HOW TO USE YOUR APPLIANCE
OPERATING INSTRUCTIONS
CONTROLLING THE APPLIANCE
PRESS THE MENU BUTTONS TO SELECT THE
MODES YOU WANT TO CONTROL
HEAT - LIGHT - FLAME - EFFECT
TO ADJUST THE FLAME BRIGHTNESS
ENSURE ‘LIGHT’ SETTING IS SELECTED.
ROTATE FINGER ON THE TOUCH DIAL
ROTATE CLOCKWISE TO INCREASE
ROTATE ANTI CLOCKWISE TO DECREASE
MENU
LED DISPLAY
FLAME/HEAT/LIGHT
LEVEL DISPLAY
LH MENU BUTTON
POWER BUTTON
CURRENT SETTING
RH MENU BUTTON
TOUCH DIAL
LEVEL
CURRENT SETTING