Livoo DOS189 User manual

User manual
WWW.LIVOO.FR
Reference: DOS189
Version : 1.4
Language : Englis
Connected Jump rope

User manual
1
You ave purc ased a product LIVOO brand and we t ank you. We take great care in design, ergonomics
and ease of use of our products. We ope t at t is product will give you complete satisfaction.
T is instruction manual is available too on our website www.livoo.fr
GENERAL INSTRUCTIONS
PLEASE, TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE
PARTICULARLY BEFORE THE FIRST USE.
A misuse of t e appliance can damage it or urt t e user. Assure
t at you use t e appliance for t e use for w ic it is designed;
we refuse any responsibilities as for t e damages by an incorrect
use or a bad manipulation.
1. Do not put t e rope in very wet or ot environment.
2. Avoid itting or dropping t e rope violently, ot erwise
damage may occur.
3. Treat t e rope wit care as it is an electronic instrument.
4. Do not immerse t e andle into water or use it w ile
raining, because it is not water-proof and damage may
occur to t e built-in electronic device.
5. T e rope is only used for t e purpose of p ysical exercise.
Do not use it for ot er purposes.
6. Be careful w en using t e rope to avoid any injuries, and
c ildren under 10 are suggested to use t e rope under t e
watc of parents.

User manual
2
FEATURES
PRODUCT DESCRIPTION
1. LCD display
2. Power on/ Power off/ Reset/ Mode Button
3. Micro USB c arging port
4. PVC steel rope
Note: T e jump rope is installed wit 3.7 V lit ium cell battery, please make sure to
c arge t e USB battery for 1 our before usage.
60 seconds
Product Size
Ф23 x 164mm
Product Weig t
0,18 kg
LCD Display
19,6 x 8,1 mm
Power
3,7 V Rec argeable Lit ium Cell Battery 60mA
USB cable
1 meter micro USB cable
Max. Jumps
9999 times
Max. Time
99 Mins 59 Seconds
Min. Jump
1 time
Min. Time
1 second
Auto off Time
60 seconds

User manual
3
PRODUCT LCD display
Display in different modes
Free Jumping
Battery indication
Numbers
countdown Jumping
Jumping number
Jumping time
Bluetoot Icon
Time countdown
Jumping
1.
Countdown Timer Mode
2. Countdown Number
Mode
3.
Free Skipping Mode

User manual
4
SET UP
T e jump andle and t e rope are packed separately in t e box, please
follow t e below steps to install t e rope and adjust t e lengt
accordingly.
Important Note: To avoid inaccurate, please make sure t e longer rope
is installed in t e inside part of t e andle.

User manual
5
USE
Installation of the Jump Rope
1. Before starting using t e jump rope, please download t e App: Skipjoy
from App store or Google play.
Or you can scan below QR code to download t e App.
2. W en you install t e application, please make sure t at your bluetoot is enabled under IOS and your
location is enabled under Android.
Note: Google requires t at all smartp ones running Android Ver. 6.0 or ig er must request location
aut orization w ere applicable.
No private information will be collected by t e application. You can also refer to t is official document,
for more information: ttps://source.android.com/devices/bluetoot /ble

User manual
6
.
3. Open Skipjoy App, fill in your personal info, and start t e App
Allow Bluetoot for IOS Allow location for Android

User manual
7
4. Skipjoy will automatically pair t e jump rope, you can c eck t e main
interface on t e App to c eck t e status of connection.
● “Connected” s own on t e main interface means successful pairing.
● “Disconnected” s own on t e main interface means unsuccessful
pairing.
-Press “Mine” --> “Device” -->“+” to add t e device manually
5. Click t e mode you need on t e main interface on t e App to start your
jumping;
Jump Modes
3 different jump modes are available: Free jump / Jump wit time countdown / Jump wit countdown
of a defined number of jumps
-Keep pressing t e button for about 3 seconds to s ift t e mode you need.
-You can also c oose t e mode from t e application

User manual
8
Free Jumping
Jump t e rope freely and t ere is no limit on time and number of
jumps
Time countdo n Jumping:
-set t e total jumping time.
-options for time can be set on t e application: 30 sec, 1 min, 5
min, 10 min, and customized time
-Wit out t e App, t e rope will use t e last countdown setting
of time from t e application.

User manual
9
Numbers countdo n Jumping:
-set t e total jumps;
-options for number of jumps can be set on App: 50, 100, 500, 1000 and customized number of
jumps.
Offline storage function
Wit out t e running of App, t e data of your jumping will be recorded
temporarily by t e rope and sync ronized wit t e App after re-connection.
Reset the rope
Press t e button on t e back of t e LCD display for 8 seconds, t e rope
will be reset. T e LCD will s ow all t e signals for 2 seconds and t en s ut
down. Press t e button again to enter t e normal use

User manual
10
Battery usage
T e skipping rope is equipped wit a built-in Lit ium-ion battery t at can wit stand normal use for
approximately 25 days (calculated based on 15 minutes of daily use, actual usage time will vary depending
on t e environment and usage time).
Typical standby time is 33 days (manufacturer's experimental data).
Charging your device
If t e signal appears on t e display, please rec arge t e cord using a normal cell p one c arger wit a
standard Micro USB socket.
During t e c arging process, t e battery signal on t e LCD screen will flas until t e battery is full.
Important:
For best battery life, do not leave t e jump rope wit a disc arged battery for a long period of time.
It is suggested to c arge t e skipping rope w en t e battery is low.
W en you do not use t e skipping rope for a long period of time, we recommend t at you c arge
t e battery at least once a mont .
Procedure to observe for battery’s end of life
T e appliance batteries must be removed before discarding t e equipment. Please follow t e procedure
below:
Ensure t at your appliance is disconnected so as to reduce any risk of electrical s ock. Disc arge t e batteries
fully.
Remove t e protection cover situated in a location w ere you connect t e mains voltage adapter and it is
removed so as to access t e batteries compartment. Carry a screwdriver to remove t e screw.
Remove t e batteries from t e equipment. Cut t e cables and tab connecting t e batteries in t e printed
circuit and remove t em.
ATTENTION: THESE NI-MH CELLS MUST BE RECYCLED OR ELIMINATED IN ACCORDANCE WITH THE
EQUIPMENT SCRAPPING.
Do not burn, dismantle, crus or break out t e batteries because t ey can release toxic substances.
Do not expose t em to extreme temperatures.
Drop t em in t e batteries recycling bins designed for t is purpose or return t em to your retailer.

User manual
11
EU DECLARATION OF CONFORMITY
We
DELTA
BP61071
67452 Mundols eim – France
Herewit declare under our sole responsibility, t at t e radio equipment
Vlogging video kit
DOS189 (Frequency range 2402 – 2480MHz)
Fulfils t e essential requirements of t e Directive 2014/53/UE
T e following standards were applied:
Radio:
EN 300 328 V2.2.2
EMC:
EN 301 489-1 V2.2.3
Draft EN 301 489-17 V3.2.2
Healt and Safety:
EN 62479 : 2010
Mundols eim, 12/02/2021

User manual
12
Correct Disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries ith separate collection systems)
T e European Directive 2012/19/EU on Waste Facilities Electrical and Electronic (WEEE)
T is marking s own on t e product or its literature, indicates t at it s ould not be disposed wit ot er ouse old
wastes at t e end of its working life.
To prevent possible arm to t e environment or uman ealt from uncontrolled waste disposal, please separate t is from ot er types
of wastes and recycle it responsibly to promote t e sustainable reuse of material resources.
House old users s ould contact eit er t e retailer w ere t ey purc ased t is product or t eir local aut ority office, for details of w ere
and ow t ey can take t is item for environmentally safe recycling .
•P oto no contractual
•Worried about t e quality of is products t e manufacturer reserves t e rig t to make modifications wit out advance notice
LIVOO
BP 61071
67452 Mundolsheim - FRANCE