LK Systems S2 User manual

1
Assembly Instruction | Dismount and Re-Mount LK Room Thermostat S2
EN.33.C.163.1411
Dismount and Re-Mount LK Room Thermostat S2
1
2
3
4
This assembly instruction shows how to correctly
dismount and re-mount LK Room Thermostat S2.
With the help of a screwdriver, unsnap the clips
on either side of the thermostat.
The front of the thermostat disconnects from the
wall mount.
Bring the lower part of the thermostat outwards
from the wall.
Bring the thermostat straight upwards along the
wall.

2
Assembly Instruction | Dismount and Re-Mount LK Room Thermostat S2
EN.33.C.163.1411
5
6
7
8
The thermostat is separated from the wall mount.
The wiring and connectors are intact. This means
that the wall mount doesn’t need to be replaced.
To mount the thermostat to the wall mount again,
slide the thermostat downwards into the wall
mount.
Push the lower part of the thermostat towards
the wall mount. Take care not to damage the
connection pins on the wall mount when re-
mounting the thermostat.
The thermostat clicks into the wall mount
which completes the mounting. The thermostat
display will light up once connected the the LK
Connection Box.