
8www.lloytronhelpdesk.com
Turn your temperature control dial to the position you desire according to the following fabric indications:
Synthetics Silk/Wool Linen/Cotton
Synthetiques Soie/Laine Toile/Coton
Chemiefasern Seide/Wolle Leinen/Baumwolle
TEMPERATURE CONTROL
ANTI CALC
This iron has an anti-calc lter that protects it from large calcium build ups. These types of calcium build ups
are usually found in hard water areas and can cause blockages in the pipework within the iron. The Anti-calc
feature makes cleaning and maintenance much easier and helps to prevent damage to the iron.
SELF CLEAN
Pressing the self clean button causes air to ow through all of the steam vents at a high pressure to remove
any mineral deposits. Performing this function regularly will help to prevent a build up of mineral deposits
from blocking any of the vents as well as the anti-drip system.
1. Fill the water tank to half full.
2. Move the adjustable steam rate control and the adjustable thermostat control to 'OFF'.
3. Plug the power cord into a suitable 220-240v~50Hz mains supply.
4. Turn the adjustable thermostat control to the maximum position and leave it to heat up until the pilot lamp
switches off.
5. Hold the iron horizontally over a sink or basin.
6. Press and hold the self clean button while shaking the iron lightly to eliminate any mineral deposits or
dirt etc.
7. During this you can press the steam button repeatedly, remembering to pause for at least ve seconds
between one burst of steam and the next.
8. When the tank is empty, release the self clean button and unplug the power cord from the mains supply,
leaving the iron to cool completely before storing.