LOBSTER Elite grand five le User manual

grand five le owner’s manual
lobster elite
play more. win more.
®
TM
®

7340 Fulton Avenue
North Hollywood, A 91605
tel [phone] fax [phone]
www.lobstersports.com
[email protected]
customerser[email protected]
TO AVOID INJURY:
• Keep face out of ball path - balls can shoot out from opening at any time.
• Use only for tennis practice with conventional tennis balls.
• Turn off the machine when leaving it unattended or before performing
maintenance tasks.
• Never place body parts or objects into machine.
• Never operate with parts removed.
• Never add balls while machine is running.
• Never put wet tennis balls in machine.
WARNINGS
Serial Number:
Purchase Date:
TO OUR CUSTOMERS
Thank you for purchasing a Lobster ball machine.
Please read this owner’s manual in its entirety before operating
your Lobster ball machine. These instructions were written to
ensure your safety and to protect the machine from misuse.
CHECK FOR DAMAGE
Inspect your machine for damage. Test all of the machines functions.
Occasionally, internal parts can be damaged in shipping. If any problems
are found, contact ustomer Service immediately for a replacement.
SAVE THE ORIGINAL SHIPPING BOX
The original box and inserts should always be used if it is necessary
to ship the machine back to the factory.
®
In the US, if you have questions about your machine, please DO NOT
contact your dealer; call Lobster Sports directly at 800.526.4041
All rights reserved. PLAY MORE. WIN MORE. & the distinctive product configuration of the Lobster ELITE are registered tradem arks of Lob-ster, Inc.


MACHINE SETUP
Intended Use
Lobster tennis ball machines are intended to be used in a dedicated tennis facility.
For safety reasons, players should stand on the opposite side of the tennis net at a
minimum of 35 feet away from the machine. Lobster tennis ball machines are
designed to throw tennis balls only.
Unpack and Keep Shipping Box
Remove the machine from the box. Keep the box along with the packing materials
in case the machine needs to be shipped back to the factory.
Machine Assembly
• Detach the hopper, flip and reattach by pushing the hopper on to the case knobs,
starting with the front knob (side furthest from handle), then attach the hopper
to the back knob.
• Do not remove the wire deflectors.
• Snap-in the elevation level pointer on the front of red base by aligning t he
pointer with the slot located on the front edge of the bracket between the server
wheels and then push pointer into the slot until a click is heard/felt .
• Turn the Main Power Switch ON.
Ball machines ship with the main power
off. The switch is located at the base of
the machine, directly below the control
panel on the left side of the metal box.
( If you plan to not use your machine for
one month or longer, we recommend that
you turn this switch off.)
Handle Operation
To raise the handle, simply lift up on the handle until you hear the lock buttons click
into place. To fold the handle down, stand behind the machine and place hands on
each of the plastic handle hinges. Simultaneously press up on the hinge lock buttons
and gently push the top section of the handle forward over your machine.
The handle is provided to push or pull the machine. The machine is not designed to be
pulled up and down stairs. If the handle is damaged or breaks in this manner, please
be advised it is not covered under the warranty. Avoid rough or uneven surfaces that
may bend or damage the underside of the machine.
Transporting the Machine
To prepare the machine for transport, invert the hopper to cover the machine and
fold the handle. The machine weighs approximately 44 pounds depending on the
model purchased and may be lifted into a vehicle by one or two people. Use the
molded handholds on the underside of the machine to lift and carry the machine.
MAIN POWER SWIT H LO ATION

CHARGING INSTRUCTIONS
Before the first use, charge the machine until the battery is fully charged.
Battery level is shown when the machine starts up as Full, High, Medium, or Low!
For optimal battery life, fully charge machine after each use otherwise the battery life
will be shortened. All Lobster chargers have t rickle charge technology which ensures
the battery will not be overcharged.
Use the LED indicator on the charger for battery charging status. A blinking
orange/red light indicates the battery is very depleted.
Charging the Battery with the Standard Charger
• Plug charger into an A outlet then plug the connector into charger port.
• The LED on charger is red when charging, turning green when fully charged.
• A depleted battery may take up to 18-22 hours to fully charge.
If you purchased a premium charger with the machine, you will not receive a standard charger.
Charging the Battery with the Premium Charger
• Plug the charger into an A outlet then plug the connector into the charger port.
• The LED on the charger is red while charging and turns green when fully charged.
• A depleted battery will be fully charged in 3 hours.
Using an Export (240v) Machine with the Premium Charger
F or ball machines used outside the US, you must charge the machine with the
appropriate premium charger to fit your country’s voltage requirements. Using a
110v charger outside the US will damage the ball machine and void the warranty.
BATTERY LIFE & MAINTENANCE
Battery Life
For optimal battery life, fully charge machine after each use. The most common reason
for reduced battery capacity and shortened battery life is chronically undercharging
the machine. Never let the machine go uncharged for more than one month.
Before storing the machine, fully charge the battery and then recharge
monthly. During the winter season or when the ball machine is not in use, the
battery should be charged every month, otherwise the battery life will be reduced.
Similar to a car battery, the battery in your ball machine will need to be replaced
depending on use and care. Replacement batteries are available on our website and
can be installed by the owner or the machine can be sent to Lobster for maintenance.
A video tutorial on battery replacement is available on the support section of our
website or on the Lobster Sports YouTube channel.


CONTROL PANEL
A. Power – Push and hold the POWER button to turn the machine on. Battery level is
shown at startup. Both the horizontal and vertical motors will perform functional
checks to calibrate the machine when it is turned on or off
.
B. Remote – Push to turn on/off the remote control receiver.
C. Drills – 12 different pre-programmed sequences that mimic opponent play.
D. Program – Press to create customized drills.
E.Manual – Machine will continuously throw a certain shot to a specific location.
F. Menu Buttons – Used to scroll through the menu options to be selected and adjusted.
A cursor on the L D will highlight the current selection.
G.Settings – Used to adjust a highlighted option on L D screen.
H. 1-18 Numbered Buttons – Used to select desired position for ball
to land in program mode.
( More detailed information can be found in the program section.)
I.Test – Used to align your machine for proper ball placement on the court.
.Play/Pause – Press to play and pause the machine.
K. Random – Random throws using variations of speed, spin and trajectory.
L. 2-Line – Alternating forehand and backhand shots, with varying degrees of difficulty.
M.Sweep – Throw balls randomly across the WIDTH (left-right) of the court.
N.Depth – Throws balls randomly the LENGTH of court, from
short to deep in one row.
0. Charger Port – onnect to charge the battery.
P. Main Power Switch – Located on the left side of the metal box directly below the control
panel at the bottom of the machine (shown above).
A
B
CD
H
K
L
C
D
E
FG
M
N
I
H
0
P


OPERATING INSTRUCTIONS
Court Placement / Test Button
Your Lobster elite grand five le is a computerized tennis machine and has been
designed to keep the ball in the full singles court.
• Ensure that the main power switch is in the up or on position.
• Start by placing the machine with the white Line Marker
positioned over the baseline, at the court’s center mark.
• Power on the machine and allow it to go through a
self test.
• Push the button. One tennis ball should be thrown over the
net to land within a 2 foot area of the opposite side of the court
where the service and center lines converge, just as depicted by
the diagram to the right.
- If the test ball lands outside of the 2 foot radius, long or short use
the and SETTINGS buttons to adjust the distance in .5 foot
increments. If the ball should fall outside of the area left or right,
nudge the front of the machine slightly to the left or right, as needed.
Retest and make adjustments as necessary.
• Once the test is complete, press any one of the oval shaped function buttons to
choose the desired mode of play, then press the play button to run that mode.
Random
Your Lobster machine will randomly throw balls on the court using variations of
speed, spin and trajectory.
• Feed – Adjust between random and 2 - 9 second intervals.
2-line Function
• Speed – hoose from 50 to 80 MPH in 5 mph increments.
• Spin – Increase and decrease top and back spin up to three levels.
• Depth – A (Deep), B (Mid), (Short), Random (the depth will constantly change).
• Feed – Adjust between random and 2 - 9 second intervals.
Sweep
Your Lobster machine will throw balls randomly across the width of the court. Shot
parameters remain at the same setting during play and include:
• Depth – A (Deep), B (Mid), (Short), Random (the depth will constantly change).
• Speed – hoose from 50 to 80 MPH in 5 mph increments.
• Spin – Increase and decrease top & back spin up to 3 levels.
• Feed – Adjust between random and 2 - 9 second intervals.

test

OPERATING INSTRUCTIONS CONTINUED
Depth
Your Lobster machine will throw balls randomly from short to deep. Shot parameters
remain at the same setting during play and include:
• Position – At the top of the L D, choose the column you wish the balls to land
in. The column number matches the buttons in the top row of your
control panel.
• Speed – hoose from 45 to 75 MPH in 5 mph increments.
• Spin – Increase & decrease top & back spin up to 3 levels. (depending on speed)
• Feed – Adjust between random and 2 - 9 second intervals.
Manual
Press the MANUAL button to practice one particular shot repetitively. The machine
will pause while you make your adjustments. Use / Menu buttons to select
location and shot parameters. Use / SETTINGS buttons to increase or
decrease value of the selected menu option.
•Speed – hoose from 35 to 80 MPH in 5 mph increments.
•Elevation – Adjust elevation between 2 and 80 degrees in 1 degree increments
to change depth of the ball thrown on the court.
•Spin – Increase and decrease top and back spin up to three levels.
•Angle – hoose position along baseline. 0 is center court with positive numbers
moving to the right and negative numbers moving to the left.
•Feed – Adjust between 2-9 second intervals, or scroll down to random setting.
When you are satisfied with your adjusted settings press the play/pause
button to start your session.

PLEASE NOTE that not all combinations of SPEED, SPIN, FEED
and DEPTH will work in conjunction with each other.

CUSTOM DRILLS
Program Custom Drills
The program function allows you to create your own drills and set up your own
training exercises. You may create sequences of shots with anywhere from 1 to 6
balls that will cycle. This allows for many more combinations that will always give
you new challenges. There are limitations to what the machine can do…please read
this carefully.
• The serving wheels can speed up faster than they can slow down. Fast shots
followed by slow shots or drastic changes in spin will produce shots out the
back of the court if used with fast feed rates. If you wish to use faster feed
rates, keep your changes in speed and spin incremental. A good guide is not to
change the speed more than your feed rate times 5 in miles per hour (treat
each level of spin as 5 MPH).
As an example : A feed rate of 4 sec will let you have up to 20 mph of change
or 4 levels of spin.
• ertain combinations of speed and spin will not stay within the court. If a
setting will not produce a viable shot, the display will blink to tell you that the
shot is not possible and remain at the previous setting.
• When you have filled up the 6th shot in a program, selecting next will
automatically take you to the overall program screen.
Create Your First Custom Drill
1. Press the PROGRAM button
2. The screen will prompt you to select a location
for your first shot. Press any of the 1 - 18
buttons to advance to the
Shot Parameters Screen.
3. The machine is programmed to throw one ball
to the location selected. You may now adjust the
shot parameters for this shot:
• Speed – hoose from 40 to 80 MPH in
5 mph increments.
• Spin – Increase and decrease top and back spin up to three levels.
• Feed – Adjust ball feed rate between random and 2 - 9 seconds.
(applied to the entire program)
4. When the shot is satisfactory, use the menu buttons / to highlight the
“Next + Back –” line. Press to choose the location and shot parameters for
the next shot in your drill or to return to overall program screen.

P#1 SHOT#1 LOC ?
Press a location
To prgrm shot, or
Press – to erase
P#1 SHOT#1 LOC?*
SPEED: 70 MPH
Spin :0 FEED: 4
Next + Back -
SHOT LO ATION S REEN
SHOT PARAMETERS S REEN
*will display your selected location


CUSTOM DRILLS & PRE-LOADED DRILLS
5. Selecting and running a drill can be done from the Overall Program Screen
• The top line displays your program number. You can change the program
number from 1-6 by highlighting the top line with the menu buttons /
and adjusting the number with / settings buttons.
• Line 2 allows you to edit or view the
settings of an existing shot in the program.
• Line 3 and 4 will show you the court location
of each ball thrown. One number for each ball.
You may have up to six balls in a program.
• Pressing Play at any time on this screen will run the program.
Editing An Existing Program
Once you have created a program you may want to adjust or completely redesign
any aspects of the program.
1. If you are not already in the program function, press the PROGRAM button
to display the Overall Program Screen.
2. First use the / settings buttons to select the program you wish to adjust.
3. Next use the menu buttons / to highlight SHOT then adjust the number
to reflect which shot in the sequence you wish to adjust (1st, 2nd, 5th…)
4. Highlight edit and press the button to change to a yes. This will take you
to the Select Location Screen.
5. The current location of this shot is now displayed in the upper right corner.
If you are satisfied with the location, press the same number to select it again
and you will advance to the shot parameters screen which will display your
current settings.
6. If you chose another location, the defaults will reset.
7. You can remove a shot from the drill by pressing the button. This will return
you to the Overall Program Screen and the drill will run with one less shot.
PRE-LOADED DRILLS
Drills
The drills button offers 12 pre-programmed training exercises. Each of the 12
custom designed court drills consists of 6 sequential shots in a designated pattern
combining court location, ball speed, and spin. To adjust difficulty, the feed rate can
be set to fixed 2 - 9 seconds or set to random that will constantly change the feed
rate. Use the / buttons to adjust this rate. Low feed settings will have a short
pause between cycles.
P# 1 PLAY TO RUN
SHOT: 2 EDIT: NO
LOCS 3 12 18
2 11
OVERALL PROGRAM S REEN

Grinder Power Baseliner All-Courter
Approach Attack / Defend Forehand Plus
3
5
64
1
2
3
4
2
6 5
11
6
5
3
2
4

PRE-LOADED DRILLS CONTINUED
Pre-Loaded Court Drills
Each of the 12 drills consists of 6 shots in a designated pattern, changing location,
ball speed and spin. To alter difficulty, the feed rate can be adjusted.
Grinder – utilizes the full back court with different types of spin.
Power Baseliner – utilizes the full back court with little spin and more ball speed.
All-Courter – utilizes both the front and back court with some top spin and less
ball speed.
Approach – emphasizes the approach from behind the baseline into the front
court with balance and speed.
Attack/Defend – designed to move a player in all directions from the baseline.
Forehand Plus – challenges the player to maintain dominant court position by
using their forehand for every shot.


PRE-LOADED DRILLS CONTIN UED
Beginner – drill to help beginners improve and build confidence.
Intermediate – drill that will help intermediates improve their court coverage
and execute a variety of shots.
Advanced – drill for advanced players to develop higher shot tolerance and learn
to quickly identify ‘opportunity’ balls that can be attacked.
Moon Baller – utilizes a high arc over the net with moderate to heavy top spin.
Slicer – drill with backspin or underspin that utilizes a low arc over the net.
Lefty – simulates strong forehand groundstrokes and strong backhand volleys.
Beginner Intermediate Advanced
Moon Baller Slicer Lefty


REMOTE CONTROL SETUP
Grand Remote Controls (optional)
The optional grand remote or the smartphone remote allows you to operate many of
the functions on your elite grand ball machine from a distance.
To activate your remote, press the button located on the control panel. When
the LED is lit the machine will accept commands from your controller.
• PLAY/PAUSE button will start and stop the machine at any time.
• TEST - Allows you to calibrate your machine.
• RANDOM - Press button to activate the fully random function.
• 2-LINE - Press button multiple times to scroll through the narrow, medium,
and wide settings for the 2-line functions.
• DRILLS - Press button to scroll though the pre-programmed drills.
• SWEEP - Press multiple times to scroll through the short, mid, deep and
random settings for the sweep function.
• DEPTH - Press button multiple times to scroll through short, mid, deep and
random settings for the depth function.
• The 8 black buttons are used to change shot parameters on the fly for the presets.
• Speed – Adjust the ball speed for 2-line, sweep, depth, and manual
presets.
• Spin – Adjust the top or bottom spin for 2-line, sweep, depth, and
manual presets.
• Feed – Adjust the ball interval for all settings.
• Elevation – Adjust the elevation for 2-line, manual, and test function.
Using the remote while a drill is running will cause the next shots parameters to
change temporarily. Doing so may cause shots to land in unplayable areas.


SMARTPHONE REMOTE CONTROL SETUP
Grand Remote for Apple Set Up (optional)
You must purchase the grand remote for Apple and have it installed in your
machine for the free remote app to work.
• Download the Lobster grand remote control from the App Store®
• Turn your ball machine on and press the button on the control panel.
• On your device, go to the “settings” button and click “Wi-Fi”. A network
called “Lobster Sports(x)” will be detected. Select this network.
• Open the Lobster grand remote control app on your device and allow up to 90
seconds for your machine and device to sync - they are connected when the
remote ONNE T/DIS ONNE T button says DIS ONNE T.
• Upon first app launch, you may be asked:
- Allow “grand” to use your location? Select “Allow While Using App”
- “grand” would like to find and connect to devices on your local network.
Select “OK”
- The Wi-Fi network “Lobster Sports-xx” does not appear to be connected to
the Internet. Select “Keep Trying Wi-Fi” although “Use ellular Data” does
not cause a problem or actually use cellular data.
• When using Apple Watch, the iPhone must stay awake. To change “awake”
settings, navigate to Settings>Display & Brightness>Auto-Lock>Never.
• In the case of a disconnect, click the ONNE T button to reconnect.
Grand Remote for Android Set Up (optional)
You must purchase the grand remote for Android and have it installed in your
machine for the free remote app to work.
• Power on your Lobster machine and press the button on the control panel.
• On your phone, download and install the Lobster Ultimate Remote Control.
• When connecting for first time, you need to pair the devices:
1. On your phone, open the Bluetooth connection settings.
2. A device, RNBT-xxxx, should be available (xxxx will be a unique ID for
your installed Bluetooth module). If you don’t see it, press ‘Scan’.
3. Select RNBT-xxxx to pair. You may receive a pairing code (which you
may not need).
• Open the Lobster app. lick the three dots on the top right of app, select
“ onnect a device” and then select RNBT-xxxx to connect. When app shows
“connected” in the gray bar, the remote is ready to use. (If your phone doesn’t
show the three dots, please contact your phone manufacturer for settings help.)
The app may ask you to give access to contacts and call history - this is not needed.


OPTIONAL ACCESSORIES
External AC Power Supply
For extended court time, the external AC power pack transforms
our battery ball machines into an A powered ball machine. Using
the external ac power supply with our machine allows for
continuous, uninterrupted use. The battery must be mostly or fully
charged for this feature to work. With this optional accessory, the
machine can run off whichever power method the user prefers.
External Battery Pack
The external battery pack provides an additiona l 4-8 hours of
court time and can be used with any of our portable machines.
Storage Cover
Our heavy duty, lined, fabric elite storage cover protects your
ball machine from the elements, as well as from dust and
moisture when in storage.
BALL CONSISTENCY
Best Type of Balls for Consistent Throws
The consistency of ball throws is dependent on the consistency
of the tennis balls used. The same age and type of tennis balls
will produce consistent ball throws. A mixture of new and old
balls will produce inconsistent ball throws. Pressureless balls
provide the best results in both toss and bounce—it’s like
playing with new balls almost indefinitely. Lobster recommends
Tretorn Micro X balls for best results, and are available from
LobsterSports.com. Never put damp or wet balls in the machine.
SERVER WHEELS
Server Wheels Maintenance
Lobster ball machines have two server wheels which throw the tennis balls. Like a
car, Lobster ball machines can last for decades if taken care of properly. And like
car tires, the server wheels will need to be replaced throughout the life of the
machine. Parts are available from lobstersports.com and customers can replace the
wheels themselves or the machine can be shipped back to Lobster for maintenance.
We have created a tutorial video showing how to replace the server wheels which can
be found on our website’s support section or the Lobster Sports YouTube channel.


TROUBLESHOOTING
Machine Doesn’t Power On
Ensure the Main Power switch is ON. Ensure the battery is charged. If both of
these things are fine, the battery wires may have become disconnected or loosened.
To check the wires:
• Make sure the MAIN POWER switch on the machine is in the off position and
ensure there are no balls in the machine.
• Undo the four screws on the control panel and gently pull back. (Be careful
not to touch the electronic board directly)
• Follow the red and black wires from the battery terminals to the control board.
If they are loose, reconnect.
Machine Error
The electronics are programmed to help the user diagnose his/her machine.
Error messages will appear on the L D screen when the machine is turned on.
If there is no obvious problem, turn the machine off and back on again to check
error message. Troubleshooting information and help videos can be found on our
website’s support section. Please visit www.lobstersports.com/support. If the error
message continues, call Lobster ustomer Service at 800.526.4041 or email
customerser[email protected] for assistance.
CLEANING & STORAGE INSTRUCTIONS
Cleaning the Machine
Always turn the power OFF when cleaning the machine. The outside of the machine
may be wiped down with a mild detergent. The inside of the machine may be
vacuumed to remove dirt and debris (i.e. leaves, sand particles, dirt, etc.) To help
keep the inside the machine clean, remove all small debris from the balls before
refilling the hopper.
Storing the Machine
If you plan to not use your machine for one month or longer, we recommend that you
turn the Main Power Switch off. Always store the machine indoors in a clean, dry
location. Exposure to rain and snow will damage the electronics. Never store the
machine in a closed vehicle—which can reach 180°—as excessive heat can negatively
affect the machine’s electronics and battery. We recommend the elite storage cover
to protect machine from dust and moisture.


CUSTOMER SERVICE & SUPPORT
Since 1970, Lobster Sports has been dedicated to providing outstanding customer
service. We invite our customers call 800.526.4041 between 8:00am - 4:30pm
PST, Monday through Friday or email us at customerser[email protected]
When contacting Lobster about your machine, please include your machine’s serial
number, which can be found on the underside of the machine.
• Lift the front of the machine using the molded handhold.
• The serial number is found on the white sticker affixed to the metal platform.
Shipping Damage
If an order arrives with shipping damages, contact ustomer Service to coordinate
sending a replacement. If a replacement part can resolve the issue, Lobster will ship
the part immediately. If not, a damage call tag will be issued. Upon pick up of the
damaged machine, the customer must call in the pick-up tracking number and a
replacement will be shipped immediately.
WARRANTY ACTIVATION
2-Year Warranty Activation
To activate your 2-year warranty, please register your machine within 30 days of
purchase by filling out and returning the Warranty Registration on the last page.
Please either email the completed form to war[email protected] or mail it in
an envelope to Lobster Sports, 7 340 Fulton Avenue, North Hollywood, A 91605.
Extended Warranty Activation
An extended warranty can also be purchased for machines in the United States.
The extended warranty must be activated within 60 days of purchase. Extend
machine coverage by 1, 2 or 3 years in addition to the standard 2-year coverage.
Please see the warranty card on the last page for details.
In the US, if you have questions about your ball machine, DO NOT
contact your dealer; please call Lobster Sports directly at 800.526.4041

LIMITED WARRANTY
Lobster Sports warrants to the original purchaser of Lobster Sports ball machine (the “Product”) that the Product will be free of
defects in materials and workmanship under normal use for a period of two years from the date of purchase, except for the battery
and server wheels, which are warranted for six months. hargers, accessories, demonstration models, and reconditioned machines
shall have a one year warranty. (Each respective warranty period hereinafter referred to as “Warranty Period”). Unless otherwise
prohibited by law, this Limited Warranty is void unless the purchaser completes and returns the attached warranty response form to
Lobster Sports within 30 days of purchase of the Product.
REMEDIES
If such a defect arises and a return authorization request is received by Lobster Sports within the applicable Warranty Period,
Lobster Sports will, at its option and to the extent permitted by law, either (1) repair the Product at no charge, using new or
refurbished replacement parts, or (2) replace the Product with a new or refurbished Product. In the event of such a defect, to the
extent permitted by law, these are your sole and exclusive remedies. Shipping and handling charges may apply. This Limited
Warranty is valid only in the jurisdiction where the Products are sold by Lobster Sports itself or through its authorized reseller or
agent and is valid to the extent permitted by the applicable laws of such jurisdictions. Any replacement Product will be warranted
for the remainder of the original Warranty Period or 30 days, whichever is longer, or for any additional period of time that may be
required by applicable law. Lobster Sports reserves the right to authorize warranty service or repairs to be done by others.
HOW TO OBTAIN WARRANTY SERVICE
To make a warranty claim, the purchaser must request a return authorization by contacting Lobster Sports by calling 1-800-526-
4041 or emailing customerser[email protected]. As may be required by applicable law, Lobster Sports may require you to
furnish proof of purchase details and/or comply with other requirements before receiving warranty service. The purchaser is
responsible for all costs of returning the Product to Lobster Sports, including, but not limited to, the cost of packaging, shipping
and applicable taxes. If Lobster Sports determines that any returned Product is not defective, within the terms of this warranty, the
purchaser shall pay Lobster Sports all costs of handling and return shipping.
EXCLUSIONS AND LIMITATIONS
Lobster Sports does not warrant that the operation of the Product will be uninterrupted or error-free. This Limited Warranty
applies only to the original purchaser of the Product that was purchased from an authorized reseller or sales channel and
manufactured by or for Lobster Sports that can be identified by an authorized “Lobster” trademark, trade name, or logo affixed to
it. Without limiting the foregoing, the Limited Warranty does not apply to any (a) Lobster Sports products and services other than
the Products, (b) non-Lobster Sports products, even if included or sold with a Product, including, without limitation, any counterfeit
products, (c) products that are, or Lobster Sports reasonably believes to be, stolen, (d) Product with altered or removed logos
and/or brand markings, (e) consumables (such as batteries), or (f) software, even if packaged or sold with the Product or embedded
in the Product.
This Limited Warranty does not apply to a Product or part of a Product that has been serviced, altered, refurbished, or modified by
anyone who is not authorized by Lobster Sports, nor does it apply to any cosmetic damage such as scratches and dents. In addition,
this Limited Warranty does not apply to damage or defects caused by (a) accident, abuse, misuse, mishandling, flood, fire,
earthquake or other external causes; (b) normal wear and tear or aging of the Product such as discoloration; (c) repairs that have
been made or attempted by you or others without authorization; or (d) operating the Product (i) outside the permitted or intended
uses described by Lobster Sports, (ii) not in accordance with instructions provided by Lobster Sports, or (iii) with improper voltage
or power supply.
No Lobster Sports reseller, distributor, agent or employee is authorized to make any modification, extension, or addition to this
Limited Warranty. If any term contained herein is held to be illegal or unenforceable, the legality or enforceability of the remaining
terms shall not be affected or impaired.
IMPLIED WARRANTIES
EX EPT TO THE EXTENT PROHIBITED BY APPLI ABLE LAW, ALL IMPLIED WARRANTIES (IN LUDING, WITHOUT
LIMITATION, WARRANTIES OF MER HANTABILITY AND FITNESS FOR A PARTI ULAR PURPOSE) SHALL BE LIMITED IN
DURATION TO THE DURATION OF THIS LIMITED WARRANTY. Some jurisdictions do not allow limitations on the duration of an
implied warranty, so the above limitation may not apply to you.
LIMITATION OF DAMAGES
EX EPT TO THE EXTENT PROHIBITED BY APPLI ABLE LAW, LOBSTER SPORTS SHALL NOT BE LIABLE FOR ANY
IN IDENTAL, INDIRE T, SPE IAL, OR ONSEQUENTIAL DAMAGES, IN LUDING, WITHOUT LIMITATION, LOSS OF
PROFITS, REVENUE OR DATA, RESULTING FROM ANY BREA H OF EXPRESS OR IMPLIED WARRANTY OR ONDITION
OR UNDER ANY OTHER LEGAL THEORY, EVEN IF LOBSTER SPORTS HAS BEEN ADVISED OF THE POSSIBILITY OF
SU H DAMAGES. Some jurisdictions do not allow the exclusion or limitation of special, indirect, incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
GOVERNING LAW
This Limited Warranty shall be governed by the laws of the State of alifornia, USA, without giving effect to any conflict of laws
principles that may provide the application of the law of another jurisdiction.


WARRANTY REGISTRATION - To validate warranty, fill out card and send back via email to war[email protected]. or mail to
address below. If you bought from a authorized dealer, please also include proof of purchase. (*Required Fields)
Machine Serial Number*______________________________________________________________________________________________________ Name*______________________________________________________________ Email*________________________________________________ Mailing Address*________________________________________________ ity*_____________________________State*_____ Zip*____________ Phone*______________________________________________________
___
Purchase Date*______________________________________ Where Purchased*________________________________________________________ How did you learn about Lobster? (circle) LobsterSports.com Google Pro Player Friend Instagram Facebook Magazine Ad lub
Dealer__________________________________ Website__________________________________ Other__________________________________ What attracted you to this product? (circle) Quality Design Price Reputation Previous ustomer Portability Better Features
Income (circle) $50-69K $70-$99K $100-$119K $120-149K $150-$199K $200-$299K $300-$499K $500K+ Gender M F
Age (circle) 15-25 26-35 36-45 46-55 56-65 66-75 76-85 86+ Occupation ______________________________________________
OPTIONAL EXTENDED WARRANTY** Please send in a separate envelope within 60 days of purchase.
One Year $65 redit ard # ____________________________________________________ Expiration Date________________________ Two Years $110 Verification ode (last 3 digits in signature bar)___________________ Select (circle) Visa Mastercard Discover ard Three Years $149 Authorization Signature______________________________________
Lobster Sports warrants each Lobster ball machine purchased will be free from DEFE TS IN MATERIAL AND WORKMANSHIP for the extended
period specified above past the normal 2 year limited warranty. The extended warranty period will run consecutively from the warranty period determined
at time of purchase. It does not cover parts worn under normal use, specifically the battery and the server wheels.
**Extended warranties only apply to machines located in the United States.
1 Year . . . . . . . . . . . .$110 2 Years . . . . . . . . . . .$165 3 Years . . . . . . . . . . .$249
Please select from the following:
0321
MAILING ADDRESS: Lobster Sports, 7340 Fulton Avenue, North Hollywood, A 91605