Logan LWR3A243L User manual

QUICK GUIDE
Of Logan Router
All manuals and user guides at all-guides.com
all-guides.com

Connect Your Router
Tips. To configure your Router, connect your computer to the Router via
wireless or using an Ethernet cable. For specific steps of joining the Wi-Fi,
please refer to annexed 1 join your Wi-Fi. The default Wi-Fi name is
Logan_XXXXXX, where XXXXXX is the last six characters of the Routers
MAC address which is shown on the routers bottom label. Either the Wi-Fi
name or password is changed, device are required to connect with Wi-Fi
manually once again.
Select Telephone Line/FTTH/Cable Access or Ethernet Access according to the type of
WAN medium your ISP provided.
All manuals and user guides at all-guides.com

States Of indicators Of the router that is powered on
Led Indicator
Status Description
SYS
Blinking
The system is working fine
Off
There is no power supply, or the router malfunctions
Wi
-Fi
Solid
Wi
-Fi is enable
Blinking
The router is transmitting
Wi-Fi data
Off
Wi
-Fi is disabled
1/2/3
Solid
The LAN port is well
-connected
Blinking
The LAN port is transmitting data
Off
No link is detected on the LAN port
WAN
Solid
The WAN
port is well-connected
Blinking
The WAN port is transmitting data
Off
No
Ethernet cable is connected to the WAN port
WPS
Solid (5 minutes)
WPS negotiation is successful. This LED indicator stays
solid for 5 minutes, and then turns off
Blinking
The router is waiting or is
performing WPS negotiation
with a wireless client
Off
*
WPS function is disable.
*
WPS negotiation is failed
L
Reserved
Your routers buttons may differ. Please refer to the actual product
Button Description
WPS/RST
Press and hold it for about 8 seconds and then release it (all LED indicators will light
up once) to reset the router to
factory
default
settings.
Press and hold it for 1
-3 seconds, and then release it to enable the WPS feature.
Within 2 minutes, enable the wireless devices WPS feature to establish WPS
connection.
All manuals and user guides at all-guides.com

Configure Your Router
1. Start a web browser, type 192.168.1.1 in the address bar, and tap enter on the keyboard.
Tips: If the Router URL is inaccessible, try www.wifilogan.com
This field is required.
This field is required.
All manuals and user guides at all-guides.com

2. If you use the Router for the first time or after you reset the Router, the
Router automatically detects your internet connection type. You are
recommended to select the detected type to configure the internet
settings. Besides, the following table may help you understand your
internet connection type and complete the configuration.
Internet
Connection
Type
Features Instructions
PPPoE
If you can access the internet
only after setting up a dial
-up
connection on the computer
using a user name and password
provided by your ISP, select PPPoE.
Select
PPPoE, type the PPPoE
user name and password
provided by ISP, customize a Wi-
Fi name and password to secure
your wireless network, and click
OK.
Dynamic IP
If you can access the internet
without setting any parameters
on your
computer, select
Dynamic IP.
Select Dynamic IP, customize a
Wi
-Fi name and password to
secure your wireless network,
and
clicl OK.
Static IP
If you can access the internet
only after setting static IP address
and other related information on
your computer, select Static IP.
Select Static IP, type the static IP
address and related information
provided by ISP, customize a Wi-
Fi name and password to secure
your wireless network and click
OK.
End. You can now try accessing the internet.
All manuals and user guides at all-guides.com

Annexed 1 Join in Your Wi-Fi
The default Wi-Fi name is Logan_XXXXXX. There is no default Wi-Fi
password.
Windows 10
2. Click your SSID and then follow
onscreen instructions.
1. Click the icon on the bottom
right corner of your desktop
All manuals and user guides at all-guides.com
all-guides.com

Mac
Select Network from
Internet & Network.
1. Click Wi-Fi 2. Click here to
Turn Wi-Fi On
3. Click Name network selected .
4. Select the wireless network
name of your Router.
All manuals and user guides at all-guides.com

iPhone/iPad
3. Click Wi-Fi
4. Click here
to open Wi-Fi
5. Find the name of the
wireless network you wish
to connect.
6. Click on it.
1. Scroll screen to find
the settings icon.
2. Click the icon.
7. Enter a security
key
8. Click to join the
wireless network
All manuals and user guides at all-guides.com

Windows 10
1. Click the icon on the
bottom right corner of your
desktop
2. Select your wireless network from the
list, click connect and then follow
onscreen instructions.
Annexed Configure Your PC
2. Click open network and
Internet settings
1. Click the icon on the
bottom right corner of your
desktop
Procedure to obtain an IP address automatically
All manuals and user guides at all-guides.com

3. Click Local
Area Connection
4. Click properties
5. Find and double
click internet protocol
version 4(TCP/IPv4)
6. Select Obtain an IP address
automatically and obtain DNS server
address automatically
7. Click OK
All manuals and user guides at all-guides.com

Mac
Click Network.
1. Click on Ethernet.
2. Choose Using DHCP.
3. Click Ok.
All manuals and user guides at all-guides.com
all-guides.com

Congratulations! You can start enjoying your internet connection.
For more information visit our website www.logan-cam.com
Contact our technical support team from our Help Center
support.logan-cam.com
@Logantechnology
All manuals and user guides at all-guides.com