Logic LGC-7598 User manual

INSTALLATION MANUAL
PUSH PULL WALL MOUNT
www.logicav.in
MODEL SERIES VESA DISPLAY SIZE MAX LOAD
LGC-7598 PUSH PULL 400x400 to 75” to 98” 265 lbs (120 kg)
WALL MOUNT 900x600

www.logicav.in
W-A: Concrete
Screw x 6
M-H:
Allen key x 1
Wall mount x 1 W-B: Fischer
expansion plug x 6
M-A: M8 X 25 x 4 M-D:
M6 X 25 x 4
M-F:
M5 X 25 x 4
Checklist
1. Product Dimension
M-B: plastic
washer x 4
M-C: Metal
washer x 4
M-E:
Plastic x 4
metal x 4
washer
M-G:
Plastic x 4
metal x 4
washer
W-C: Washer x 6
Interface
bracket x 2
Dimension in mm
VESA
400x400
900x600
630.00
966.00
IMPORTANT : Prior to installation, ensure that you have received all the parts as per the checklist

www.logicav.in
Choose below method for fixing wall mount.
ATTENTION: Drilling the wall for the wall mount should be executed by a craftsperson only
Exercise care to prevent any scar or damage to the wall.
2. Installation
CAUTION : Wear safety glasses while operating power equipment.
Failure to comply may result in eye injury
1. Place the mount on the wall
2. Place the unit on the wall and make marks on the wall.
Note: While marking make sure the mount is placed in a straight line using the surface leveler

www.logicav.in
3. Drill the wall and insert the Fischer expansion plugs into the holes
place the mount on the wall and insert concrete screw. (Refer W-A,
W-B, W-C in the checklist)
4. Place the interface bracket on the TV/ display and insert
the washer and screw (Refer the checklist for the suitable screw and washer)

www.logicav.in
5. After placing the mount to the wall,
pull the swivel mount towards the front
6. Place the TV/ display
on the wall mount

www.logicav.in
7. Rotate the three screw slightly, and than rotate the top knob anti-clockwise
for angle adjustment next rotate the bottom knob clock wise, than tighten the three screw.
8. Rotate the three screw slightly, and than rotate the top knob clockwise for angle adjustment
next rotate the bottom knob anti-clockwise, than tighten the three screw.
Angle adjustment details

www.logicav.in
9. Slightly loosen the below screw first and next rotate the top screw
for height adjustment. (Refer allen key M-H in the checklist)
BEFORE HEIGHT
ADJUSTMENT
AFTER HEIGHT
ADJUSTMENT
TOP SCREW
Height adjustment details
BOTTOM SCREW

Final view after installing the mounted display on the wall
Closed view
Opened view
www.logicav.in