Logic CAM-120 User manual

CAM
-
1
2
0
–
Technical Manual 1.0
0
CAM-120
Technical Manual
Version 1.00

Logic IO ApS. Ph: (+45) 7625 0210
Ho mboes A é 14 Fax: (+45) 7625 0211
8700 Horsens Emai : info@ ogicio.com
Denmark www. ogicio.com / www.rtcu.dk
CAM
-
1
2
0
–
Technical Manual 1.0
0
Page 2 of 9
Introduction
This manua contains technica documentation a owing easy insta ation and use of the
CAM-120 camera modu e designed for the RTCU X32 units. For information on the high-
eve programming of the CAM-120, p ease refer to the RTCU IDE documentation.
The CAM-120 extends the capabi ity of the RTCU p atform with the abi ity to take JPEG
compressed snapshots. Snapshots can be taken in four different reso utions.
A who e new range of app ications becomes avai ab e with CAM-120, such as:
• Remote monitoring of equipment, devices, work areas or ocations.
• Any triggered event app ication.
• Security app ication.
• “A picture is worth a thousand words…”
Snapshots taken can either be saved to a SD-CARD, which can be accessed remote y, or
it can be sent direct y over GPRS to a server.

Logic IO ApS. Ph: (+45) 7625 0210
Ho mboes A é 14 Fax: (+45) 7625 0211
8700 Horsens Emai : info@ ogicio.com
Denmark www. ogicio.com / www.rtcu.dk
CAM
-
1
2
0
–
Technical Manual 1.0
0
Page 3 of 9
Table of Contents
Introduction ......................................................................................................................... 2
Tab e of Contents................................................................................................................ 3
Graphica view..................................................................................................................... 4
Insta ation........................................................................................................................... 5
MX2i Pro/Pro+ and DX4 Pro Connection......................................................................... 5
AX9 Pro Connection ........................................................................................................ 5
Lens adjustment .............................................................................................................. 6
Appendix A.......................................................................................................................... 8

Logic IO ApS. Ph: (+45) 7625 0210
Ho mboes A é 14 Fax: (+45) 7625 0211
8700 Horsens Emai : info@ ogicio.com
Denmark www. ogicio.com / www.rtcu.dk
CAM
-
1
2
0
–
Technical Manual 1.0
0
Page 4 of 9
Graphical view
igure
1
: ront and backside view

Logic IO ApS. Ph: (+45) 7625 0210
Ho mboes A é 14 Fax: (+45) 7625 0211
8700 Horsens Emai : info@ ogicio.com
Denmark www. ogicio.com / www.rtcu.dk
CAM
-
1
2
0
–
Technical Manual 1.0
0
Page 5 of 9
Installation
MX2i Pro/Pro+ and DX4 Pro Connection
The CAM-120 is connected to seria port 1 (service port) on the RTCU MX2/DX4. For this
purpose a 3 meter cab e is de ivered, which a so a ows p acement of the CAM-120 away
from the RTCU X32 unit itse f.
Power supp y for the CAM-120 is contro ed by the RTCU unit. This keeps the power
consumption kept at a minimum, on y turned on when taking snapshots.
AX9 Pro Connection
The CAM-120 is de ivered with the same 3 meter cab e as for MX2i and DX4, but there
isn’t a 6-po ed TYCO connector for easy-to-p ug. The co or coded 4 cab es need to be
connected to the AX9 manua y. Cab es are co or coded, and these co ors wi be used in
the fo owing description:
As seen on the above picture, there are 4 signa s to be connected to the AX9 Pro. The
cab e co or and the signa name on the AX9 Pro are given in the fo owing tab e:
Co or Signa Name
B ack SGND
Ye ow SER1_TXD
White SER1_RXD
Red DCOUT33
Connect the 4 co ored cab es to their respective abe ed ang ed screw termina s as
mentioned in the above tab e. P ease refer to AX9 Pro Technica Manua to ocate the
termina s.

Logic IO ApS. Ph: (+45) 7625 0210
Ho mboes A é 14 Fax: (+45) 7625 0211
8700 Horsens Emai : info@ ogicio.com
Denmark www. ogicio.com / www.rtcu.dk
CAM
-
1
2
0
–
Technical Manual 1.0
0
Page 6 of 9
Lens adjustment
After the CAM-120 is p aced correct y, the focus needs adjustment. This is done by
oosening the screw that ocks the ens and turning the ens carefu y eft or right manua y,
depending on the distance to the objective to focus on.
igure 2: Lens adjustment
Screw

Logic IO ApS. Ph: (+45) 7625 0210
Ho mboes A é 14 Fax: (+45) 7625 0211
8700 Horsens Emai : info@ ogicio.com
Denmark www. ogicio.com / www.rtcu.dk
CAM
-
1
2
0
–
Technical Manual 1.0
0
Page 7 of 9
Specifications
160 x 128 640 x 480 (VGA)
Without mounting bracketW 36 x H 36 x D 2External Dimensions (mm)
320 x 240 (QVGA)80 x 64Resolution 160 x 128 640 x 480 (VGA)
Without mounting bracketW 36 x H 36 x D 2External Dimensions (mm)
320 x 240 (QVGA)80 x 64Resolution
+70 °C-15 °CWorking Temperature
MaximumTypicalMinimum
3.3 3.63.0Power supply (VDC)
120 (diagonal)0 (diagonal)Field of View (degrees)
+70 °C-15 °CWorking Temperature
MaximumTypicalMinimum
3.3 3.63.0Power supply (VDC)
120 (diagonal)0 (diagonal)Field of View (degrees)
AutomaticAuto Gain Control
AutomaticExposure
AutomaticWhite Balance
1/4 CMOSImage Sensor
Still Image JPEG Compression VGA Camera ModuleCamera type
AutomaticAuto Gain Control
AutomaticExposure
AutomaticWhite Balance
1/4 CMOSImage Sensor
Still Image JPEG Compression VGA Camera ModuleCamera type

Logic IO ApS. Ph: (+45) 7625 0210
Ho mboes A é 14 Fax: (+45) 7625 0211
8700 Horsens Emai : info@ ogicio.com
Denmark www. ogicio.com / www.rtcu.dk
CAM
-
1
2
0
–
Technical Manual 1.0
0
Page 8 of 9
Appendix A
igure 3: Area overview

Logic IO ApS. Ph: (+45) 7625 0210
Ho mboes A é 14 Fax: (+45) 7625 0211
8700 Horsens Emai : info@ ogicio.com
Denmark www. ogicio.com / www.rtcu.dk
CAM
-
1
2
0
–
Technical Manual 1.0
0
Page 9 of 9
igure 4: Room overview
Table of contents
Other Logic Security Camera manuals