
For use with iPad®and iPhone® (Apple iOS®)
1) Install batteries in the keyboard,
making sure that they are positioned
according to the embedded
directions in the battery cavity.
2) Turn the Power switch on the back
of the keyboard to the “On” position.
3) Press and hold the “Connect”
button on the back of the keyboard
for 3 seconds until the LED indicator
on the front of the keyboard flashes.
4) On your iPad / iPhone, go to
Settings > Bluetooth and select
“Bluetooth Logickeyboard” on your
list of Bluetooth Devices, to start
the pairing process.
5) A dialogue window appears on the
iPad / iPhone with a four-digit code.
6) Type the four-digit code on your
“Bluetooth Logickeyboard” followed
by Return/Enter.
7) Your keyboard should now be listed
as “Connected” on the Bluetooth
Devices list on your iPad / iPhone.
8) In order to make your new
Logickeyboard fully compatible to
the iPad / iPhone iOS, type the key
combination of Fn + Ctrl + W on
your “Bluetooth Logickeyboard”.
9) Your keyboard is now ready for use.
How to set up. This keyboard is compatible to the Apple iOS software for
use with an iPad and iPhone, or to the Mac OS X software when used with Mac
models. Follow the setup instructions below to connect your new keyboard, with
attention to whichtype of deviceit is meant for use with.