Please note- if installed correctly, there is no need to press the pairing button on the back of the
keyboard during the installation process. If your installation fails and your keyboard does not pair with
the Receiver during this first installation attempt, we recommend that you press the Pairing button once
and see that the Num Lock indicator lights up for a few seconds. Alternatively, you can remove the USB
Nano Receiver and use it on another USB 2.0 port on you computer.
How to set up your Wireless
Slim Line PC Logickeyboard™
Your new Wireless Slim Line PC
keyboard and USB Nano Receiver is
made for easy installation on your
Windows© PC. Just follow the few
steps below:
1) Insert the USB Nano receiver into
any USB 2.0 port on your computer.
2) Let your PC complete the
installation of the USB Nano
receiver. Wait for the confirmation
message on you monitor. It may
take a minute. No driver installation
is needed.
3) Make sure that the Power Switch
on the back of the keyboard is turned
to the “Off” position
4) Remove the battery cover and
insert two AAA batteries according
to the embedded direction guide in
the battery tray. Put the battery cover
back on and turn the Power Switch to
“On”
Your Wireless Slim Line PC
logickeyboard™ is automatically
paired with the Receiver and ready
for use. Pairing is referred to Nano
receiver recognizing the radio
frequency transmitted from the
wireless keyboard.
www.logickeyboard.com