Logik L5SSTB12 User manual

First Time Installation
44
Unpacking
11
Operating Your Remote Control
22
Connection
33
Well done, your new 500GB Freeview SDTV PVR is now ready to use. You will nd that there are many exciting
features available.
To get to know all these features, please take some time to read the instruction manual provided.
500GB Freeview
SD TV recorder
Quick Start Guide
L5SSTB12
Remove all packaging from the unit. Retain the
packaging. If you dispose of it please do so
according to any local regulations.
1. Squeeze the cover lever and lift the battery cover
to access the battery compartment of the remote
control.
2. Insert two AAA size batteries (included).
3. Close the battery compartment cover.
1. When your unit is switched on for the rst time, it will
go straight into the First Time Installation menu.
Main Unit
Instruction Manual
(QSG-L5SSTB12-20120918-V2)
Quick Start Guide
Mains Adapter
Remote Control
and Batteries
Thank you for purchasing your new
Logik 500GB Freeview SD TV recorder
set-top box.
Please follow this quick start guide for a
successful rst time set up.
We recommend that you spend some time reading
the instruction manual in order to fully understand
all the operational features it offers.
Read all the safety instructions carefully before
use and keep the instruction manual for future
reference.
The unit will take a while to load.
ANTENNA
IN
ANTENNA
OUT
OPTICAL
AUDIO OUT
SCART (TV)
DC IN
Aerial
OR
To aerial
wall
socket
To RF IN
socket
To SCART
socket
RF Coaxial
Cable
(not
included)
RF Coaxial Cable
(not included)
SCART Cable
(not included)
To Mains Socket
Mains Adapter Cable
(included)
Digital Optical
Cable
(not included)
To SPDIF
socket
TV
Audio System
3. Press the buttons to select Yes and then press
the OK button to begin automatic channel scan.
4. The tuning progress screen will be displayed,
showing you how many channels have been found
and saved. The tuning may take several minutes to
complete. You can press the MENU button to cancel
the auto tuning.
Target Region Descriptor
During tuning your TV may have received signals from
more than one transmitter. If this has occurred the
Target Region Descriptor screen will be displayed. This
will enable you to select the correct regional
transmission for the local news service that you require.
1. Press the buttons to adjust each option’s setting
and then press the OK button to conrm.
2. When the tuning is complete, a message will be
displayed on the screen. Press the OK button to
restart the unit after 3-5 seconds. The channels are
arranged in a preset order. When the search progress
is completed, you can watch saved broadcasts after
the restart process.
2. After hard disk initializing process, First Time
Installation Menu window is displayed on the
screen. Press the buttons to select the TV type
and then press the OK button to conrm.
Country This will be shown as UK for the UK.
Primary
Region
This will show the regional country
(e.g. England, Wales, Scotland, NI).
Secondary
Region
This will allow you to set the region for your
local news service.
Tertiary
Region
You may receive signals from more than one
transmitter within the Secondary Region
(e.g. Beds and Cambs may have Luton or
Sandy Heath).
1
3
2