OWNER’S MANUAL
7
Lift Chair
Operation
To recline your chair, press the
down button (S1) and hold until you
reach your desired position. Then
release the button.
To return to a seated position from
recline, press the up button (S2) and
hold until the chair returns to a
closed seated position. Then release
the button.
To lift your chair, press the up button
(S2) and hold until you reach your
desired height. Then release the
button.
To return to a seated position from
lift, press the down button (S1) and
hold until the chair returns to
the floor seated position. Then
release the button.
To lift your chair from a reclined
position, press the up button (S2)
and hold. The chair will keep going
past the seated position and start to
lift. Release the button when the
chair reaches the desired height.
S1
S2
Getting into your lift chair. While
standing next to your chair, press
the chair up button (S2) and raise
the chair to a height you can sit
against. This height will vary from
person to person depending on the
individual’s needs. Raise the chair
high enough so you do not have to
flop down into the chair. Flopping
down into the chair will damage it
and could cause personal injury.
Press the chair down button (S1). As
the chair continues downward,
adjust yourself into a position that is
comfortable to you. Continue
pressing the button until chair is in
the seated position (chair firmly on
the floor), then release the button.
To recline your chair from
the lift position, press the
down button (S1) and
hold. The chair will keep
going past the seated
position and start to
recline. Release the
button when the chair
reaches the desired
reclined position.
ver 2018.08.16E
