Seat cushion
Back Cushion
Arm/corner Cushion
5
8
" Bolt
(X8 for Lounge)
(X16 for Corner)
PFB
(X2 for Lounge)
(X4 for Corner)
P1_C
(X1 for Lounge)
(X2 for Corner)
PF Clip (X2) 1/2" button head (X4)
One set of this kit for each Ottoman, Lounge, Corner,
No Table Sofa, and 1 Table Sofa.
The 2 Table Sofa does NOT get the clip kit.
Otto/lounge/corner base
Back/Arm
X1 for lounge
X2 for corner
Seat cushion
Back Cushion
Arm/corner Cushion
5
8
" Bolt
(X8 for Lounge)
(X16 for Corner)
PFB
(X2 for Lounge)
(X4 for Corner)
P1_C
(X1 for Lounge)
(X2 for Corner)
PF Clip (X2) 1/2" button head (X4)
One set of this kit for each Ottoman, Lounge, Corner,
No Table Sofa, and 1 Table Sofa.
The 2 Table Sofa does NOT get the clip kit.
Otto/lounge/corner base
Back/Arm
X1 for lounge
X2 for corner
Seat cushion
Back Cushion
Arm/corner Cushion
5
8
" Bolt
(X8 for Lounge)
(X16 for Corner)
PFB
(X2 for Lounge)
(X4 for Corner)
P1_C
(X1 for Lounge)
(X2 for Corner)
PF Clip (X2) 1/2" button head (X4)
One set of this kit for each Ottoman, Lounge, Corner,
No Table Sofa, and 1 Table Sofa.
The 2 Table Sofa does NOT get the clip kit.
Otto/lounge/corner base
Back/Arm
X1 for lounge
X2 for corner
Seat cushion
Back Cushion
Arm/corner Cushion
5
8
" Bolt
(X8 for Lounge)
(X16 for Corner)
PFB
(X2 for Lounge)
(X4 for Corner)
P1_C
(X1 for Lounge)
(X2 for Corner)
PF Clip (X2) 1/2" button head (X4)
One set of this kit for each Ottoman, Lounge, Corner,
No Table Sofa, and 1 Table Sofa.
The 2 Table Sofa does NOT get the clip kit.
Otto/lounge/corner base
Back/Arm
X1 for lounge
X2 for corner
Seat cushion
Back Cushion
Arm/corner Cushion
5
8
" Bolt
(X8 for Lounge)
(X16 for Corner)
PFB
(X2 for Lounge)
(X4 for Corner)
P1_C
(X1 for Lounge)
(X2 for Corner)
PF Clip (X2) 1/2" button head (X4)
One set of this kit for each Ottoman, Lounge, Corner,
No Table Sofa, and 1 Table Sofa.
The 2 Table Sofa does NOT get the clip kit.
Otto/lounge/corner base
Back/Arm
X1 for lounge
X2 for corner
*Bolt shown actual size.
INCLUDED PARTS
1x
SEAT
1x
BASE ASSEMBLY
4x
5/8˝ BOLT
8x
LOUNGE CORNER
0x
ARM
1x
LOUNGE CORNER
1x
BACK
1x
LOUNGE CORNER
1x
BACKREST
2x
LOUNGE CORNER
1.
2.
3.
5.
4.
ASSEMBLY TIPS:5 Important Points You NEED to Read
Prior to beginning assembly, please inspect and inventory the parts to make sure
you have everything and that nothing was damaged during shipping. If damage has
occurred, please take photos and go to lolldesigns.com/damage. Rest assured we’ll
get it taken care of straight away!
To avoid scratching furniture, assemble on a clean soft surface like a blanket, carpet, or
the attened cardboard box the furniture was shipped in.
Start all bolts by hand to ensure proper alignment and to prevent cross threading.
Then using the Allen Key or Loll Tool, tighten until you feel resistance.
Bolts should not be forced, but some components, particularly the blocks will need a bit
of muscle to get them together as they are machined for a snug t. If parts are still not
going together, please send us a photo of the part you are having trouble with.
You can use a cordless screw gun if you have one and know how to use it. Set the
clutch setting at low to medium torque. We do not recommend using an electric drill
without a clutch to install bolts as you can easily overtighten and damage the product.
ASSEMBLY INSTRUCTIONS & PRODUCT INFO:
LOLL TOOL
Locate the box marked
“Tool Included” before
beginning assembly.
RECYCLE THE PACKAGING
We’ve gone through great lengths to make as much of our packaging as possible recyclable.
The cardboard box, paper wrap, ller and paper bags can all go in your recycling bin. The
muslin hardware bags replaced plastic bags with the intention of reducing plastic and
encouraging reuse. Loll Designs and Planet Earth thank you!
WE WANT YOU TO LOVE YOUR LOLL
For more info and visual aids, watch the assembly videos at www.lolldesigns.com/videos
For product care & maintenance, visit www.lolldesigns.com/care-maintenance
For further lollygagging assistance, please reach out!
+1 877-740-3387
5912 Waseca Street
Duluth, Minnesota 55807
BLOCK & BOLT INSTALLATION
Insert bolts through countersunk hole side of blocks
as shown below.
CORRECT INCORRECT
Countersunk
Hole
“Loll Designs inspires people to appreciate the outdoors.”
Greg Benson - Founder/CEO
PLATFORM ONE LOUNGE + CORNER
