LOMI LOMD1096 User manual

User Guide
LOMD1096
Vanity Mirror
Wireless Speaker

READ CAREFULLY AND SAVETHIS MANUAL
Customer Support
For any questions or problems with your product, please visit
our website at customersupport123.com and click on the Brand
of your item.
Caution
• THIS DEVICE IS NOT ATOY, do NOT allow children or
pets to use or play with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose the unit to extreme temperatures (heat
or cold), open flames, humid, or wet conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or
sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is
not damaged.
• Do not allow the USB port or the connectors of the
supplied USB cable to be exposed to dust, or water, or
come into contact with any conductive materials such
as liquids, metallic powders, etc.
• This device contains a built-in battery, and should not be
disposed of with regular household waste. Please
consult the local authorities on the correct way to
dispose of this device.
In the Box
• LOMD1096 - Vanity Mirror Speaker (x1)
• Micro-USB Charging Cable (x1)
• User Manual (x1)
Before You Begin...

Location of Controls
Getting Started
1
2
4 5 6 7 8 9
3
10
LOMD1096
1. Mirror
2. Micro-USB Charging Port
3. Built-In Speaker
4. [I/O] Button:
Press+hold: Power ON/OFF
5. Built-In Microphone
6. [ — ] Button:
Press: Skip to previous track
Press + hold: Decrease volume
7. [ ] Button:
Press: Play/pause, answer/end phone call
2x Press: Redial last outgoing number
Press+hold: Reject incoming call
Back of
Mirror
8. [ + ] Button:
Press: Skip to next track
Press+hold: Increase volume
9. LED Indicator
10. [Light] Button:
Power LED Light ON/OFF

Charging the Speaker
Plug the small connector of the included micro-USB charging cable
into the micro-USB charging port on the back of the mirror’s base.
Plug the large connector into a USB power source, such as the USB
port on a computer, or plug into a 5V USB adapter (not included)
and plug into a wall socket.
The LED Indicator will turn RED when charging and turn OFF when
fully charged. When low on power, a tone will be heard indicating
that the speaker needs to be recharged.
Powering the Speaker ON/OFF
• Press + hold the [I/O] button on the speaker
base to power the speaker ON and OFF.
• When powered on, the speaker will enter
Bluetooth pairing mode, and may automatically
re-pair to a previously-paired device in range.
Pairing the Speaker
1. Power the speaker ON. A tone will be heard and the speaker will
enter Bluetooth pairing mode. The LED indicator will flash BLUE.
2. Go to your device’s Bluetooth settings and set it to search for
new devices. Select LOMD1096 when it appears on the list of
found devices. (If your device prompts for a password, enter the
password “0000”).
3. Once successfully paired, a tone will be heard and the LED
indicator will turn solid BLUE. You should be able to play music
on the speaker.
4. When playing music, the LED indicator will slowly flash BLUE.
Adjusting Volume & Playback
Speaker playback, volume and phone controls can be controlled
using the buttons on the speaker base or your paired device.
• Press the [ + ] and [ — ] buttons to skip tracks.
• Press + hold the [ + ] and [ — ] buttons to adjust volume.
• Press the [ ] button to answer/end a phone call.
• 2x press the [ ] button to redial the last outgoing number.
• Press + hold the [ ] button to reject an incoming call.
Using the Mirror Light
• Press the [Light] button on the speaker
base to turn the mirror light ON or OFF.

Compliance Information
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modifications not expressly approved could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Radiation Exposure Information
This device has been evaluated to meet general RF exposure requirements.The device can
be used in portable exposure conditions without restriction.
WARNING Li-ion Battery Inside
This product is fitted with a Li-ion battery. Do not damage, open, or
dismantle the battery and do not use it in damp and/or corrosive
conditions. Use only with compatible chargers. Never dispose of
batteries in a fire, and never expose them to high temperatures. Do
not expose the product to temperatures exceeding 60°C (140°F).
Rating Label Definitions
This symbol signifies that the product must not be discarded as household waste, and should be
delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps
protect natural resources, human health and the environment.
This symbol signifies and declares that this equipment complies with battery charging which
complies with California CEC and energy efficiency.
Direct current symbol.
This symbol signifies that this is a wireless device powered by Bluetooth® technology. The
Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Southern Telecom is under license.
This symbol represents FCC Declaration of Conformity and compliance.

Printed in China
Designed in the U.S.
v1. 04/2021
Warranty Information
90-Day Limited Warranty
Territory: United States/Canada
LIMITED WARRANTYTO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by
Southern Telecom, Inc. to the original consumer purchaser against defects in materials and
workmanship (“Warranty”) as follows:
To obtain warranty service:
• Visit our customer support portal: www.customersupport123.com
• Select the brand and model of your device
• Select “Service Request” and fill out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer
Your product will be repaired or replaced, at our option, for the same or similar model of equal
value if examination by the service center determines this product is defective. Products
received damaged as a result of shipping will require you to file a claim with the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper
installation or operation, lack of reasonable care, unauthorized modification including software
modifications such as the installation of custom firmware.This warranty is voided in the event
any unauthorized person opens, alters or repairs this product. All products being returned to
the authorized service center for repair must be suitably packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, OTHERTHAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY.
DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY
PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY
PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON
DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE
- AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE REMEDIES OF THE
CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR
ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES
(SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS,
DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT.
EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING
THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED
THE PURCHASE PRICE OFTHE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY
SHALL NOT EXTENDTO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO
PURCHASEDTHE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or
consequential damages or allow limitations on warranties, so limitation or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may have other rights that
vary from state to state or province to province. Contact your authorized retailer to determine
if another warranty applies.
All product names, trademarks, and registered trademarks are property of their respective
owners. All company, product, and service names used in this document are for identification
purposes only. Use of these names, trademarks, and brands does not imply endorsement.
Table of contents
Popular Indoor Furnishing manuals by other brands

Allen + Roth
Allen + Roth WSVS1648C manual

Monarch Specialties
Monarch Specialties I 3464 Assembly instructions

CB2
CB2 Helix Assembly instructions

TEMPLE & WEBSTER
TEMPLE & WEBSTER BZISBROK Assembly instructions

Unique Furniture
Unique Furniture Nors Table 709-157-1020 Assembly instruction

Regency
Regency LWD6524 instructions