Loocam C1 User manual

For more information about this camera,
please visit our official website: www.loocam.com
Wire-Free Battery Powered Security Camera
User Manual

01 / What's in the Box
Quick Start Guide *1 Reset Pin *1
Battery Camera *1 USB Cable *1
Bracket *1Magnetic Bracket *1
1
Mounting Screw Bag *1 Adhesive Pad *2

02 / Gallery & Specs
Part Description
Solid Red - Activate
Slow Blinking Red - Wait for network
configuration
Solid Blue - Network is connected
Fast Blinking Red - Connecting Network
Sound pickup
Support up to 128GB local storage
Press and hold for 5 seconds to
reset the camera (cannot remove
the camera in App)
Micro SD
Card Slot
Press and hold for 4 seconds to
turn ON/OFF
DC 5VPower Supply
Power Switch
Status Light
Microphone
Reset Hole
HD Lens
IR-LEDs
Status Light
Microphone
PIR Sensor
Speaker
2
Magnetic Chuck
Wall Mount
DC 5V Power Port
Power Switch
Micro SD Card Slot
Reset Hole
Charging Indicator
Alarm
Spotlight

3.2 Register an Account
3
3.1 Search "CloudEdge" in App Store or Google Play Store,
or scan the QR code below to download and
install on your smartphone.
Note: Please authorize the following settings when running
the app for the first time.
New users need to sign up using email/phone number, tap
the "Sign Up", set a nickname and password. Follow the
instructions to sign up and log in.
03/ Install CloudEdge App
(1) Allow "CloudEdge" to use data and wireless network
( it would fail to add device if not allowed ).
(2) Allow "CloudEdge" to push notifications ( for smartphone
to receive push alert when PIR motion sensor is triggered)

04/ Add Device
4.1 Insert a Micro SD Card
4.2 Turn On the Camera
4
Please insert a Micro SD card to record and replay the
motion detection video. *MicroSD Card sold seperately
(Up to 128GB)
NOTE: Please insert the Micro SD card before powering
on, otherwise the Micro SD card cannot be read.
Press the power button for 3-4 seconds to turn on the
camera (if the device cannot be turned on, please plug
in the DC5V 1A/2A charger and charge it for 15 minutes),
and make sure that the indicator red light is on.
NOTE: DC 5V-1A/2A power adapter is not included.
Insert a Micro SD Card
Press the Power button

4.3 Connect to WiFi
Camera Router Smartphone
5
(1) Keep the camera, phone and router within range of 30
inches and connect to the wireless network.
(2) Run CloudEdge App, tap “+” and select “BATTERY
CAMERA”, tap NEXT.
(3) Press the camera reset button for 3-5 seconds.
Once the device is reset successfully, status led will
show red light slow blinks. Tap Next.
(4) Select 2.4Ghz WiFi SSID and input password, tap NEXT.
NOTE: The camera currently only supports 2.4GHz
wireless network.
xxxxxxxxx

6
(5) Follow the instructions on the APP.
Face the QR code towards the camera lens at a range
of 5-8 inches.

7
(6) Upon successful scan, a tone can be heard. Tap "Next" to
start connecting the camera to WiFi. Once connected, you will
be redirect to confirmation screen.

8
5.1 Installation Tips
05 / About CloudEdge App
(1) Installation guide prompt will pop up when entering live
view for the first time. Recommend to use the guide if the
camera is not yet installed.

(2) Place the camera and smartphone at the location
where the camera is to be installed and tap "Next"
9