To open
Hold cover on both sides and gently pull towards you. For additional information, declaration of confirmity, visit www.loxone.com/help/window_handle_airAbout the product
The Loxone Window Handle Air detects if a window has been left unsecured based on the three positions of the the handle - closed, open, tilt. Additionally an internal sensor can detect vibrations and alert you if the window is forcefully opened whilst you are not at home. It can be used to control a variety of non safety critical functions in your smart home, however, we recommend it is configured according to the Loxone Standard.InstallationAdjust the length of the square spindle to the required length and lock in place by tightening the fixing screw using the provided hex key. Next use the appropriate length mounting screws to secure the handle on the window frame.Power up your Window Handle Air by using the provided AA batteries. The Window Handle Air will now go immediately into learning mode for the pairing with your Miniserver.To finish the installation push the over towards the window frame.Information
Contains FCC ID: COR-ZWIR4512AC1This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1.This device may not cause harmful interference2.This device must accept any interference received, including interference that may cause undesired operationLearn Button Fixing ScrewStatus LEDSquare SpindleMounting Screws2 x M5This folder is a part of the product!