LST AC-58000-300 User manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
AC-58000-300_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Carbon Monoxide Detector
AC-58000-300
Description
• ADM loop technology with
Apollo/Discovery protocol
• Ideal supplement to common smoke
detectors
• Sensitivity selectable in 5 steps
• Optional connection of remote
indicator
• Sealed electronics
The Carbon Monoxide Detector AC-58000-300 uses a
durable electrochemical CO sensor. It is an ideal sup-
plement to common smoke detectors because it is in-
sensitive to the usual vapors and household products,
in low concentrations. The carbon monoxide detector
does not respond to smoke particles and heat, and
therefore it shall only be used in addition to smoke or
heat detectors. Besides, the size of the fi re area shall
not exceed 50m2.
The proven ADM loop technology with Apollo/Discovery
protocol establishes a permanent communication bet-
ween the fi re detection control panel and the detector.
That ensures a periodical function testing of the detec-
tor.
The two LEDs with 360° visibility indicate the activated
condition of the detector. The detector address is se-
lected by means of a code card in the detector base.
Therefore the detector can be changed without additi-
onal tools.
The detector can be attached to different types of ba-
ses, and it can be protected against theft.
Specifi cations
Operating voltage Supply through loop voltage
Current consumption typ. 400µA (quiescent)
Ambient temperature 0°C to +40°C (no condensation)
Relative humidity 15 – 90% (no condensation)
Dimensions ø × H 100 × 42 (mm)
Colour white
Weight 105g
Order number 243100
Order name CO-Detector/Anal./Disc/Apo AC-58000-300