Lucci LEDlux 269318 User manual

Installation Instructions
1 | P a g e v1.0 ( 0 6 / 1 7 )
BAXTER LIGHT & BLUETOOTH SPEAKER
SKU# 269318, 269319
Input: 5V 1A
Battery: 3.7V 4400mAh
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before using the product. Please keep the instructions for future reference.
Warranty
This product is covered by a 3 year warranty from the date of purchase. Please retain proof of purchase.
Warranty will be void if there is any damage due to improper usage or modification to the product.
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
Installation Requirements
Select a suitable location for this product;
- Ensure it is on a flat and stable surface or it can be hung via the portable belt.
- This product is not waterproof, ensure it is not used in the rain or in any damp and wet areas.
- If it is used in an area prone to moisture, ensure that the area is well ventilated and an appropriately rated
exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is
not covered under warranty.
Lay out all the components on a smooth surface and make sure there are no components missing.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
Check whether the fitting has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Product Identification

Installation Instructions
2 | P a g e v1.0 ( 0 6 / 1 7 )
Charging the Fitting
1. Open the ‘silicon cover’at the back of the fitting.
2. Insert the cable into the ‘micro USB’port and connect to a USB port on a computer/laptop or 5V 1ADC power adaptor.
3. A red ‘charging indicator’will start flashing during the charging process.
4. The red ‘charging indicator’will be ON when it has finished charging the built-in battery.
5. When the battery is charging, the power bank function cannot be used.
Power Bank Function
1. Open the ‘silicon cover’ at the back of the fitting.
2. Insert the cable into the ‘USB’ output port to begin charging your mobile phone. USB power output: 5V 1A.
3. A green ‘charging indicator’ will be ON when the fitting is charging a device.
4. If the green ‘charging indicator’ begins to flash the built-in battery is low and cannot charge the external device
anymore. Please re-charge the fitting.
White Light Function
1. Short press to turn the white light ON.
2. Press and hold to dim the light or adjust the brightness level. (there is no memory function for brightness level)
3. Short press to turn the light OFF.
Colour Light Function
1. Short press to turn the colour light ON.
2. Press to change the colour. There are seven different colours to select.
3. Press and hold for automatic colour changing mode. It will continuously cycle through the different colours.
4. Short press to turn the colour light OFF.
Auxiliary Line-In Function
1. Open the ‘silicon cover’ at the back of the fitting.
2. Insert a 3.5mm audio cable into the Auxiliary Line-In port.
3. Press to turn ON. The blue status will turn on and the fitting is in auxiliary line-in mode.
4. During auxiliary line-in mode:
Short press to mute the sound.
Short press to increase volume. (Skip to next track function will not work during auxiliary line-in mode)
Short press to decrease volume. (Skip to previous track function will not work during auxiliary line-in mode)
5. Press and hold to turn OFF. There will be a descending power-down tone.

Installation Instructions
3 | P a g e v1.0 ( 0 6 / 1 7 )
Bluetooth Function
1. Ensure nothing is plugged into the Aux line-in jack when using Bluetooth function.
2. Press to turn ON. A blue status indicator will flash rapidly and there will be an ascending power-up tone.
3. Turn on your Bluetooth device and search for devices in the Bluetooth menu.
4. When “Baxter range” appears in the Bluetooth device list, select “Baxter range” to pair and connect together.
(If it asks for a password, enter 0000)
When your Bluetooth device has successfully connected the blue status indicator will begin to flash slowly.
5. During music play back:
Short press to PLAY/PAUSE music.
Short press for the NEXT TRACK.
Long press to INCREASE VOLUME.
Short press for the PREVIOUS TRACK.
Long press to DECREASE VOLUME.
6. If there is an incoming call:
Short press to answer the call.
Long press to reject the call.
7. Press and hold to turn OFF. There will be a descending power-down tone.
Tips
This product has a built-in lithium battery, keep away from fire and high temperature environments.
Select a suitable location away from liquids and hazards.
If the product has not been used for a long time, ensure the battery is fully charged before using again.
The LEDs are not replaceable and there are no serviceable parts, do not attempt to dismantle or open the product.
Young children should be supervised to ensure that they do not play with this product.
Handle the fitting and/or shade with care to avoid any damage or breakage.
To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
Ensure that the fitting does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.

Installation Instructions
4 | P a g e v1.0 ( 0 6 / 1 7 )
Specifications
SKU #
269318
269319
COLOUR
Black
Silver
INPUT
Micro USB, 5V 1A
BATTERY
3.7V, 4400mAh
BLUETOOTH
V2.1 + EDR
LED
White LED: 1.5W, 80 lumens, dimmable
Colour LED: 1W, 7 colours, non-dimmable
SPEAKER
5W, 80Hz-20kHz
POWER BANK
USB Output: 5V, 1A
AUXILIARY INPUT
3.55mm jack
WEIGHT
0.5kg
DIMENSIONS
H:235mm W:95mm L:95mm