LUCIDE TENSO SOLAR User manual

INSTALLATION MANUAL
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the
installation process. We aim to inspire and illuminate our clients
by offering trendy, high-quality and affordable lighting.
Welcome to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!
Visit our website and discover
our entire collection
CURIOUS ABOUT OUR BRAND?
Our brand video gives you a
glimpse behind the scenes at
Lucide
#ILLUMINATESYOURWORLD
Take a look at how others
around the world use Lucide
products
Follow us for the latest lighting trends!

For more specifications of this product please visit
www.lucide.com
Dimensions LxWxH: 14cm x 14cm x 50cm
Main material: Aluminum
Color: Anthracite
Style: Modern
Shape: Rectangle
Weight: 1,40kg
Dimmable: No
Light direction: Downlight
Adjustable in height: Not In Height Adjustable
Directional: Not Directional
Cable: No Cable On Product
Sensor: With Motion Sensor & Day/Night
Sensor
Control: On/Off Switch - On The Product
Power supply: Solar Energy
IP-Class: 54
Electric Class: 1
Number of light sources: 1
Lamp socket: Integrated LED
Maximum wattage: 2,2W
Power requirements: 220-240V~50Hz
Lumen: 264Lm
Colour temperature: 3000K
Expected lifetime: 15000h
Warranty: 3 Years
General
Specifications
Item number: 27892/02/30
EAN code: 5411212271648
TENSO SOLAR

For more specifications or dimensions of this product please visit
www.lucide.com
TECHNICAL DRAWING & DIMENSIONS
Item number: 27892/02/30
EAN code: 5411212271648
TENSO SOLAR
The explanation of the
IP ratings can be found
in the safety
instructions.

INSTALLATION DRAWING SPECIFICATIONS
TENSO SOLAR
Item number: 27892/02/30
EAN code: 5411212271648

Safety Instructions for outdoor items
Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functi-
oning of the light xture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation
should always be done by a qualied electrician.
Always isolate the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualied electrician.
Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see
further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inammable products. Always
respect the minimal distance (indicated on the light) to inammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external exible cable is damaged, it needs to
be replaced exclusively by the manufacturer, his service agent, or a qualied electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (res-
pect type and maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the xture
IP 44
IP 44
This item is only suitable for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned
to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth
connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 44 : Splashproof
IP 54 : Dust protected and splashproof
IP 65 : Dust-tight and protected against water jets
IP 67 : Dust-proof and protected against
immersion for 30 minutes
If the protection glass is damaged or broken,
it needs to be replaced immediately.
Please respect the minimum distance from the
bulb to inammable objects.
7