Luda Elektronik CRV8-M701R User manual

Usermanual
Key Features & Functionality
•supportup to 200 meterof Secured video transmissions
•Wireless Monitor with 7” LCD screen, support Video display from rear-view camera up
to VGA@25FPS(Single Camera);orQVGA@20fps(Multiple Camera)
•Support up to 4 camera connection,with Rear-camera fixed atCH1
•Wireless monitorsupport CH auto-switch functions,with a signaltrigger cable connect
from the monitorto the power switch of the rear-gearwarning light;wheneverthe rear-
gearis selected, wireless monitorwillauto-switch to CH1 for rear-viewing,and switch
back to previous selectedCH when R-gearis no longerselected.
•Camera SupportDC Powerinput from 12~48V,and MonitorSupportDC Powerinput
from 6~48V so this system can be installed to any type of car battery.
•IndividualCamera BrightnessSetting is available to suit differentuser installation
environment
•Video from each connectedcameras can be display in the monitorin normalmode or
Mirror mode (The “M” Sign will be display in the screen) individually.
•MonitorsupportIR remote controllerfor easy operation.

Assembly to Car

7” LCD Monitor
Assembly to car

7” LCD Wireless Receiver
1. Pairing Indicator
2. PowerIndicator
3. Channel Switch( CH1, CH2, CH3, CH4 )
4. Enter Manual Key
5. Scan On/Off Key (Scan from CH1,CH2,CH3,CH4)
6. Quad mode On/Off
7. IR
8. DC IN
9. Trigger for back camera (Once Car back lightbeen
started, Monitorbeen triggered to play the back
camera’s image)
10. PowerOn/Off
11. Antenna
1
2
3
4
5
67
8 9 10
11

1
EXIT Exit Menu
Scan 3/8/15S Auto Scan Interval Time Setting
CAM1 On/Off/ Mirror Select Camera on/off/mirror
CAM2 On/Off/ Mirror Select Camera on/off/mirror
CAM3 On/Off/ Mirror Select Camera on/off/mirror
CAM4 On/Off/ Mirror Select Camera on/off/mirror
Pair CAM 1 2 3 4 Pair Selected CH
Brightness Settings Enter Brightness setting
(New Page will be display)
Version Check Check Current Software Version (Photo 3)
Factory Reset Restore Factory Reset
Brightness Setting Menu: （Photo 2）
EXIT Return o main menu
Monitor 08 Brightness Control (Level 01~15)
CAM1 08 Brightness Control (Level 01~ 15)
CAM2 08 Brightness Control (Level 01~ 15)
CAM3 08 Brightness Control (Level 01~ 15)
CAM4 08 Brightness Control (Level 01~ 15)
2
3
CRV8-M701R Car Rear-viewing System Operation flow

Assembly to Car

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should
be installed and operated with a minimum distance of20cm between the radiator and
your body.