LUMAHAWK LMM-PRO600 Manual

Introducon
Welcome to the world of LUMAHAWK LCD On-Camera Monitors.
The LMM-PRO600 is designed for composing and focusing images directly from your
DSLR or DV camera as well as viewing images and video clips from it. It’s simple
to use and accepts a variety of popular input formats. To take advantage of all the
features and to ensure safe operaon, please read through this instrucon manual.
Instrucons for Set-up of the
LMM-PRO600 On-Camera LCD Monitor
Front Panel Controls
The most frequently used monitor controls are directly accessed with the front panel
buons. These are:
• F1/F2/F3/F4/F5
User assignable funcon keys
• F6
Toggle between HDMI and SDI inputs. When the monitor switches from one input to the
other, it will breiy display the input type and resoluon in the top right corner of the
screen.
• Volume
Rotate the Volume knob to adjust the speaker or headphone volume. Push the knob to
access Brightness, Contrast, Saturaon and Sharpness. Rotate the volume knob to adjust
the selected parameter. When the OSD menu is visable, push the knob to hide it.
• MENU
Push the MENU knob to display the OSD menu. Rotate the knob to navigate through the
menu items.
Powering the LMM-PRO600
The LMM-PRO600 can be powered in the following ways:
• With the supplied AC adapter.
• A 12V DC power supply ed with an XLR plug.
• An F-style DV baery such as the LUMAHAWK F-550 Li Ion Baery.
NOTE: Remove the baery from the monitor when not in use to ensure maximum
baery life.
11
2 3 4 4 4 4 4 5 6 7
1. Sun hood slot
2. Speaker
3. Headphone jack
4. Function Key
5. Input Signal Select
6. Volume / Parameter
adjust
7. OSD Menu /
Parameter select
Front
Turning the monitor on and selecng a signal source
The power switch is located on the back of the monitor. Once the monitor is turned on, the
screen will turn blue and display the LUMAHAWK logo.
Push F6 to select the signal source. The LMM-PRO600 will display signals from HDMI and
SDI-HD video.
Included Accessories
• 7” LCD HD Camera Monitor
• F Style DV Baery Plate
• Shoe Mount Ball Head
• AC/DC Adapter
• XLR Power Input Socket
• Folding Sun Hood
• Mini HDMI to HDMI Cable
Back 8. HDMI output
9. HDMI input
10. SDI output
11. SDI input
12. Battery plate
13. Firmware port
14. Power switch
15. DC power input
16. XLR power input
8
9
10 11
13
12
14
15
16
HDMI / SDI Pass-through
The LMM-PRO600 features HDMI and SDI-HD output ports that allow for unmodied signal
pass-though.
This means that addional monitors can be aached to the PRO600 via these output ports.
These addional monitors will receive the unmodied image (e.g. no centre markers or
check eld display) from the original source (i.e. the source aached to the HDMI or SDI
input ports).
Using OSD to adjust monitor sengs
Push the MENU knob to display the OSD (On Screen
Display) menu.
From this menu you can access and make adjustments to
all the monitor’s parameters.
• Rotate the MENU knob to scroll through the main menu
secons and push again to enter a secon. Within a
secon, rotate the menu knob to highlight the desired
parameter or funcon.
• Once highlighted, rotate the VOLUME knob to cycle
through the funcon’s opons.
• Aer the funcon has been adjusted, rotate the MENU knob to move to another
funcon or push the VOLUME knob to hide the OSD.
Auxiliary Funcons
• Single Color
Use the Volume knob to select O, Red, Green, Blue or
Grayscale.
• Pseudo Color
Pseudo Color displays the luminance of the image using
the industry-standard IRE scale.
• Zebra Crossing
The Zebra Crossing lter highlights over exposed regions
of the image with a red zebra paern.
• Assist in Focus
The Assist in Focus lter highlights the in-focus regions of the image in Red, Blue or
Yellow, as selected in the ‘Focus Color’ seng. Use the Volume knob to choose between:
-Color image with focus highlighted
-Grey scale image with focus indicated
-O
• Focus Color
Set ‘Assist to Focus’ color to Red, Blue or Yellow.
• Histogram
Display a Histogram of the image on the screen.
• Audio Column
Display Audio level meters for the image source displayed on the screen.
• Paern Generator
Display an industry-standard set of color bars, connuous tone grey scale and stepped
grey scale image.
• 5D2 Camera
Turn the signal from the selected source camera O and On.
Aaching the sun hood
Always close the sun hood before aaching it to or removing it from the monitor.
• To aach the sun hood to the monitor insert the two teeth towards the boom
on the hood’s frame into the two slots on the front of the monitor, just above the
control buons. With the teeth inserted all the way in, apply rm pressure on the
top of the hood’s frame and slide it down into the slot.
• To open the hood, li the top panel up followed by the le panel out and then the
right panel out (i.e starng with the top panel, open in a counter-clockwise order.)
• To close the hood, start with the right panel going in, then the le and nally the
top (i.e opposite order from opening)
• To remove the hood, rst close it. Then push the hood frame upwards towards the
top of the monitor and li away from the monitor face.

About Nadel Enterprises and Lumahawk
Nadel Enterprises and the Lumahawk brand are recognized worldwide as the leading
brand of high quality equipment for both professional and amateur photographers.
Using the most innovave photo-electronic technology coupled with simplicity of use,
Lumahawk products are specically designed for today’s digital studio and on-locaon
photography.
When it comes to capturing the image, Lumahawk exceeds the photographer’s demands
for reliability and versality.
Warranty
This product is warranted against poor workmanship and defecve materials for a period
of one (1) year from the date of purchase. This warranty does not include abuse, careless
handling, collateral damage and / or normal wear and tear. It is considered normal for a
minimal amount of pixels, to a maximum of three (3), to fail on the display acve viewing
area. Nadel Enterprises Inc. reserves the opon to refuse service for display pixel failure
if deemed unobtrusive to eecve use of the monitor by our technicians.
It is Nadel Enterprises Inc.’s opon and discreon whether to repair or replace or reject
the warranty claim.
To apply for a warranty claim, return your product with proof of purchase to your dealer.
You can also contact us at 416.745.2622, 9 a.m. to 5 p.m. EST or via e-mail at
[email protected]om.
We reserve the right to change warranty terms without noce.
LCD Panel TFT LCD 7” / 1843200 pixels
Resoluon 1024×600
Brightness 250 cd/m²
Contrast rao 700:1
Response me 10ms
Dot pitch 0.05(W) x 0.15 (H)
Viewing angle 75°/75 (L/R), 70°/75° (U/D)
Supported formats 480i, 480p, 576i, 576p, 720/ 50p /60p,
1080/ 24p/ 24psf/ 25p/ 50i/ 60i/ 50p/ 60p
Backlight LED
Signal input HDMI / 3GHD-SDI
Signal output HDMI / 3GHD-SDI
Input power voltage range DC 6V-24V
Power consumpon ≤10 W
Working temperature -20~50°c
Storage temperature -30~65°c
Dimensions 196mm X 156mm X 52mm
Weight .5kg
Specicaons
www.lumahawk.com
Color Seng
• Brightness
Adjust image brightness.
• Contrast
Adjust image contrast.
• Saturaon
Adjust image saturaon.
• Color Temperature
Adjust the color temperature of the monitor
image.
Use the volume knob to select 9300K, 7500K,
6500K or USER.
If USER color is selected, use the MENU knob to scroll through Red, Green and Blue
sengs and use the VOLUME knob to increase or decrease specic values.
Picture Seng
• Video Rao
Select 16:9, 4:3 and Auto image aspect rao.
• Scan Mode
Select between Underscan and Overscan of the
image on the screen.
• Pixel to Pixel
Toggle Pixel to Pixel display O and On.
• Zoom
Zoom into the image 1.4X, 5X, 10X and O.
• H Mirror
Flip the image horizontally.
• V Mirror
Flip the image vercally.
• Freeze
Toggle On to freeze image. Toggle O to return to the live source image.
Shortcuts
• F1/F2/F3/F4/F5
The F Buons 1 through 5 can be assigned to the
following parameters:
Assist in Focus, Zebra Crossing, Pseudo Color,
Single Color, Camera Mode, Freeze, V Mirror, H
Mirror, Zoom, Pixel to Pixel, Scan Mode, Video
Rao, Nine Grid, Safe Border, Center Mark, Paern
Generator, Audio Column, Histogram.
Use the Volume knob to scroll through and assign
the desired funcon to the highlighted Funcon
key.
Cauon
• Only use the supplied power supply when not powering the monitor with a baery.
• Remove the baery when not using the monitor.
• Do not expose the monitor to extreme heat or humidity.
• Do not use harsh chemicals to clean the monitor. Gently wipe the screen with a
clean cloth to remove smudges and ngerprints.
• This monitor does not contain any user-serviceable parts inside. Do not aempt
to open the casing, as this will void your warranty. If service is required, please
contact the LUMAHAWK oces directly.
Troubleshoong
It’s normal for the screen to go dark for a few seconds when turning the camera or
signal source on or when toggling between dierent sources. It’s also normal for bright
lines to briey appear on the screen when the monitor is turned on.
Image displayed is black and white
• Check that the hue and saturaon levels are properly set.
• Set the Single Color to None.
• Ensure that cables running from the camera to the monitor are securely and properly
connected.
Image displayed is an abnormal or distorted color
• Check that the hue and saturaon levels are properly set.
• Set the Single Color to None.
• Ensure that cables running from the camera to the monitor are securely and properly
connected.
No image being displayed
• Check that both monitor and camera are turned on.
• Ensure that cables running from the camera to the monitor are securely and properly
connected.
• Check that correct signal source is selected with the F6 buon.
No Sound
• Check that the volume on monitor is turned up.
• Ensure that cables running from the camera to the monitor are securely and properly
connected.
• Check that correct signal source is selected with the F6 buon.
OSD Seng
• OSD Language
Select OSD language. Choose between English and
Chinese.
• Blending
Adjust the transparency of the OSD background
• Timer
Display a mer in the top right corner of the screen
when the OSD is not showing. Turn o the mer
to reset it.
• Reset
Return the monitor to its factory default sengs.
Auxiliary Line
• Center Mark
Toggle center cross hairs O and On.
• Safe Border
Adjust Viewnder perimeter indicator from
80%,85%,90%,93%,96%, 2.35:1 and O
• Nine Grid
Display or hide a 3x3 grid superimposed on the
screen. The region that’s highlighted in red can be
zoomed in on by clicking the volume knob. Turn
the volume knob to scroll through the regions.