Lumina SK1305 User manual

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 1 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
1
Done: HB, HP
Check: KV
N11013
Retro Stainless Steel Kettle
the premier series
model number: SK1305
after sales support
tel: 1300 366 144

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 2 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
2
Retro Stainless Steel Kettle
What your 1 year warranty means
Great care has gone into the manufacture of this product and it
should therefore provide you with years of good service when used
properly. In the event of product failure within its intended use
over the course of the first 1 year after the date of purchase, we will
remedy the problem as quickly as possible once it has been brought
to our attention. In the unlikely event of such an occurrence, or if
you require any information about the product please contact us via
our after sales support services, details of which can be found in this
manual and on the product itself.

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 3 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
3
Thank you for purchasing this product from our Lumina Signature®
range. We believe that we have provided you with a product that is
both reliable and value for money. We encourage you and your friends
to choose from our range of Lumina Signature®products again in the
future.
PACKAGE CONTENTS
1 Kettle
1 360º Base
1 Instruction manual
2 Warranty stickers
1 Warranty certificate
Please ensure that all these contents are accounted for before disposing
of any packaging. Dispose of any objects which may pose a safety risk
for small children.
SAFETY INSTRUCTIONS
Please read these safety instructions before using your appliance,
and keep this instruction manual in a safe place for future
reference.
Make sure that you know how the appliance functions and how to
operate it.
Maintain the appliance in accordance with the instructions to
ensure that it functions properly.
Keep this manual with the appliance. If the appliance will be used
by a third party, this instruction manual must be supplied with it.
The safety instructions, by themselves, do not eliminate danger;
proper accident prevention measures must always be used.
For any customer service inquiries, or in the unlikely event of product
failure, please phone or email our helpline. Contact details provided
below. Use helpline before attempting to return the product to the
retailer.
Toll free Help line: 1300 366 144
Email: info@telefixsales.com.au
•
•
•
•
•
•
•
•
•
•
INTRODUCTION

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 4 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
4
INTRODUCTION ..................................3
PACKAGE CONTENTS.........................3
SAFETY INSTRUCTIONS ...................3
SAFETY wARNINGS ...........................5
OPERATION GUIDE.............................8
Parts guide ......................................8
Before first use ................................9
Using the kettle ..............................9
Troubleshooting ............................10
CARE AND CLEANING......................11
Cleaning the filter.........................11
Descaling .......................................11
TECHNICAL DATA .............................12
TABLE OF CONTENTS

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 5 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
5
Electrical safety
Check if the voltage indicated on the bottom of the
appliance corresponds to the local mains voltage before
you connect the appliance. If it does not match up,
contact the after sales support details listed in this
manual and do not use the kettle.
Do not operate the kettle on an inclined plane.
In order to be protected against electrical hazards,
do not immerse the power cord, plug, or appliance in
water or any other liquid.
Ensure your hands are dry before handling the plug or
switching on the appliance.
Power cord and plug
Check the power cord regularly for visible damage. If
the power cord is damaged, it must be replaced by the
manufacturer, the manufacturer’s authorized service
centres or similar qualified personnel.
The length of the power cord can be adjusted. To
shorten the cord, push the excess cord back into the
base. For added safety, only the minimum length of the
cord should be visible between the base and the socket.
Close supervision is necessary when any appliance is
used near children.
Do not unplug the appliance by pulling on the cord.
Instead, grasp the plug and pull.
Keep the cord away from heat sources and do not let
the power cord hang over a table edge.
Installation
Keep the appliance away from heat sources and place
only on heat resistant, dry and stable flat surfaces.
Do not place the kettle on hot surfaces or metal trays.
Do not use the kettle at subzero temperatures. The
control thermostat may reset to boil and energize the
element.
Turn the spout away from walls or cabinets during the
boiling process to avoid possible steam damage.
•
•
•
•
•
•
•
•
•
•
•
•
•
SAFETY wARNINGS

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 6 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
6
Water
Boiling water can cause serious burns. Be careful
when the appliance contains hot or boiling water.
Do not open the lid when the water is boiling. Boiling
water may spray out.
Pour slowly when pouring hot water. Do not over-tilt
the appliance. Exercise caution when carrying the
appliance when it is full of boiling water.
Do not move the kettle while it is switched on.
The water will remain hot for a considerable time after
boiling.
Do not immerse any part of the appliance in any liquid.
In order to avoid scalding yourself, always ensure the
lid is correctly positioned before operating. Do not
remove the lid while water is boiling.
Sharp objects
Keep the appliance, power base and the mains lead
away from the edge of worktops.
Children
Caution. Keep out of reach of children.
This appliance is not intended for use by young
children and unwell persons.
Close supervision is necessary when any appliance is
used near children.
Ensure that users are fully aware of the danger of the
escaping hot steam and splashing boiling water.
Handling
Use your appliance only for the heating of drinking
water. Other liquids or food will contaminate the
interior.
This appliance is for household use only. Do not use
outdoors or in a bathroom.
Do not fill to above the MAX level of 1.7 litres or below
the MIN level 0.7 litres. If the appliance is over-filled,
boiling water may be spilled.
Unplug the appliance from the wall socket when not in
use, and before moving and cleaning. Let the appliance
cool down completely before cleaning and storing.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SAFETY wARNING

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 7 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
7
Do not switch on unless the appliance contains at least
the MIN amount of water.
Use the appliance only with the lid closed, and with the
supplied base.
Before using the appliance for the first time, or if it has
not been used for a long period of time, fill the kettle to
the MAX mark and boil, then discard the boiled water
and rinse the appliance out with fresh cold water.
Use handles and do not touch the casing of the
appliance during use. The appliance heats up and can
cause burn wounds. The metal materials on top of the
appliance can become very hot.
Ensure that the appliance is correctly placed onto the
power base before switching on.
Use the appliance only with the power base supplied,
and vice versa. Do not use the base for any other
purpose.
If there is a malfunction, or if the appliance has been
damaged in any way, return the appliance to the
customer service centre for examination, repair, or
adjustment, as special tools are required for repairs.
Unattended
Do not leave appliance unattended while in use.
Disconnect from the mains.
Store in a safe place
When not in use, store your appliance and its
instruction manual in a safe and dry place.
Liability
No liability can be accepted for any damage or
personal injury caused by non-compliance with
these instructions or any other improper use or
mishandling. This appliance is intended for household
use only.
•
•
•
•
•
•
•
•
•
•
•
SAFETY wARNINGS

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 8 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
8
Parts Guide
1 Handle
2. Lid
3. Boil-dry protection
4. Water level indicator (MAX/MIN)
5. On/Off switch with indicator light
6. Connector
7. 360º Base
8. Power plug and cord
9. Kettle
10. Cord storage
11. Filter
12. Spout
OPERATION GUIDE
1
2
4
5
7
12
9
11
6
8
3
10

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 9 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
9
Before first use
Remove any adhesive labels and wipe the outside of the kettle with
a damp cloth.
Rinse the inside of the kettle and fill it with cold water, boil and
then empty the kettle. Repeat this procedure a couple of times to
clean the kettle of any remaining residue from the manufacturing
process.
Using the kettle
Remove the kettle (9) from its base (7) before you start filling it
with water. Be careful not to spill water onto the connector (6).
Fill the kettle (9) through the open lid (2) with water. Only fill
water between the MIN and MAX levels on the water level indicator
(4).
Close the kettle (9) with the lid (2).
Place the kettle (9) on the base (7) and press down the on/off switch
(5) to start boiling the water. The indicator light (5) lights up.
The kettle (9) cannot be switched on if it is not properly situated
on the base (7).
After the water is boiled, the on/off switch (5) will automatically
turn to the 0 position and the indicator light (5) will go off.
Do not try to alter or remove the boil dry protection (3).
Carefully pour the hot water into your cup, pot, or teapot.
You can switch off the kettle (9) manually by softly lifting up the
on/off switch (5).
After each use, empty the kettle (9) completely and disconnect it
from the main power supply.
Always fill with water before using the kettle (9). Do not use without
water. The kettle (9) is equipped with boil-dry protection (3) and
will automatically shut down, if there is no water inside.
•
•
•
•
•
•
•
•
•
•
•
•
•
OPERATION GUIDE

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 10 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
10
OPERATION GUIDE
Troubleshooting
If a problem occurs and you are unable to solve it with the information
below, contact the after sales support centre using the contact details
provided in this manual.
Problem Solution
Kettle is not working • Check the connection.
• Check if the kettle is correctly
positioned on its base.
• Check if the switch is locked in
the position “on”.
• Make sure that the kettle has
been filled with water.
Kettle is working intermittently • Scale may be interrupting the
boiling process. Descale the
kettle (Descaling).

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 11 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
11
The kettle should be cleaned and descaled regularly. This will prolong
the life of the kettle.
Always unplug the kettle and let it cool down before cleaning.
Never immerse the kettle and mains lead into any liquid.
The outside of the kettle and the base can be cleaned by simply
wiping with a cloth moistened with soapy water. Do not use abrasive
cleaning agents, scourers, metal utensils, etc.
To prevent damage to the appliance, do not use alkaline cleaning
agents.
Cleaning the filter
The filter prevents particles from being poured into your drink. As
the filter catches the particles it needs a casual cleaning to maintain
easy pouring of the kettle.
Clean the filter by taking it out of the spout and brushing it with a
soft nylon brush under running water.
Descaling
Scale consists of calcium carbonate (CaCO3). Depending on the amount
of calcium carbonate in your water, scale may build up in the kettle.
The amount of scale depends on the hardness of the water in your
area and the frequency with which you use your kettle. In order
to keep the kettle in good condition, it is recommended to descale
it regularly. If the hardness of your water is very high, meaning it
contains a high amount of calcium carbonate, you will need to descale
more frequently. If your water hardness is soft, meaning less calcium
carbonate, descaling will not be necessary as frequently. The water
hardness is measured in dH (degrees hardness). The following table
shows the guidelines:
water hardness
0-4 dH very soft
4-8 dH soft
8-12 dH medium hard
12-18 dH fairly hard
18-30 dH hard
•
•
•
•
•
CARE AND CLEANING

Client: ALDI AU (OPT)
Project: SK1305
Language: EN
Date: 11.01.2008
Version: 05
Page: 12 (of 12 pages)
Barcode: 930 5026 10 000 3 00251
12
CARE AND CLEANING
The recommended descaling frequency is:
Descaling frequenty
0-18 dH once every 3 months
18-30 dH once every month
Fill the kettle with 1.5l water and bring it to the boil.
After the kettle has switched off, add white vinegar to the MAX
level. Leave the solution in the kettle overnight.
Empty the kettle and rinse the inside thoroughly. Fill the kettle
with clean water and boil the water. Empty the kettle and rinse it
with clean water again.
If some scale still remains, repeat the procedure.
You can also use an appropriate descaler. In which case you should
follow the instructions on the packaging of the descaler.
TECHNICAL DATA
Voltage : 220-240V AC 50Hz
Power : 2000-2400W
Maximum fill capacity : 1.7l
Minimum fill capacity : 0.7l
•
•
•
•
•
Table of contents