Lumina LUFJ141 User manual

triple cyclonic
vacuum cleaner
instruction manual
model number LUFJ141
after sales support
tel: [phone]
[email protected]
N15151

After sales support TEL: [phone]
Triple Cyclonic
Vacuum Cleaner
What your 1 year warranty means
Great care has gone into the manufacture of this product and it should therefore
provide you with years of good service when used properly. In the event of
product failure within its intended use over the course of the first year after
the date of purchase, we will remedy the problem as quickly as possible once it
has been brought to our attention. In the unlikely event of such an occurrence,
or if you require any information about the product please contact us via our
after sales support services, details of which can be found in this manual and on
the product itself.

DESCRIPTION
A. Floor brush
B. Pedal for changing functions
C. Accessory stand
D. Narrow nozzle and Small
brush
E. Sofa brush
F. Extension tube
G. Wind control knob
H. Handle
I. Flexible tube
J. Air intake duct
K. Plug tube
L. Front cover
M. Carrying handle
N. Front cover button
O. Sliding lock button
P. Cord crewing button
Q. Plate for wind output
R. Plug
S. ON/OFF button
After sales support TEL: [phone]

Please read all instructions carefully before using
Do not use outdoors or on wet surfaces
Do not touch the power cord or plug with wet hands
Do not use the appliance to vacuum inflammable substances, like cigarette
and hot ashes
Keep the openings free to avoid blockage.Hair, loose clothing may
Turn off the control before unplugging
Always turn off after use.
This appliance is not intended for use by persons including children with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
If the supply cord is damaged, it must be replaced by the manuafcturers,
its service agent or similarly qualified persons in order to avoid a hazard.
If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order to avoid a hazard.
If the cleaner is damaged, don’t use it any more, it must be repaired by the
service agent authorized by the factory.)
Do not remove the plug from the
socket by pulling the cable or the
appliance itself.
Do not run the appliance over
the power cadle.
Do not the appliance to vacuum
lighted matches, cigarette ends
or hot ash.
reduce the air flow.
Do not use the appliance on wet
surfaces.
Do not use the appliance when it
is upright)
Do not use the appliance to
vacuum needles, drawing-pins
or sting.
ASSEMBLING THE VACUUM CLEANER
Always remove the plug from the power socket before
Fitting or removing accessories.
After sales support TEL: [phone]
IMPORTANT SAFETY GUIDELINES

Fitting the flexible tube
Insert the flexible tube into the air intake duct on the appliance. To do this, slide
the intake duct cover,insert the tube and press until it clicks into position.
Removing the flexible tube
Remove the plug from the power socket. To release the flexible tube, press the
button on the end of the air intake duct firmly.
Fitting the extension tubes and accessories
Removing the extension tubes and accessories
To remove the accessories, pull firmly apart.
INSTRUCTION FOR USE
1. Before using the appliance, unwind the cabel and insert the plug into the
power socket, A YELLOW mark on the power cable shows the ideal cable length.
Do not extend the cable beyond the REDmark. To rewind the power cable, press
the rewind button and guide the other hand to ensure that it does not whip causing
If the power cable can not be rewined completely pull the cable out a little
and press the rewinder button again.
This process can be repeated until the cable is completely rewound.
2. Press the ON/OFF button to switch the appliance on. It is advisable to set the
electronic power regulator to MIN before switching the appliance on.
3. By turning the speed control control knob the absorption power can be adjusted.
damage.
After sales support TEL: [phone]

HOW TO CLEAN THE DUST CONTAINER
1. To take out the dust container, push the lock button and slide the button
2.
3. Turn the dust container and pull it way to obtain the filter.
4. Take out and clean filter ensure that it is correctly assembled after it is cleaned.
The dust container is released when the button is pressed.
,
carefully in water. Allow the
filter to dry completely before
replacing it.
. To clean or replace the air outlet filter, firstly detach
the grille by pulling firmly away from the appliance.
from the appliance.Clean or replace the .The filter should be
washed regulary under the before
MAINTENANCE
When the motor filter is dirty
remove the filter and wash
1
2. Remove the filter filter
tap and allowed to dry replacing it in the filter
g
3. R i g on how frequently is used.
rille.
epace the filter every 2-3 months,dependn
After sales support TEL: [phone]
at the same time.

USING THE CLEANING ACCESSORIES
os,1:bristles extended,for hard floors Pos.2:bristles restracted,for carpets
shelves, books,
Draw s.
hile cleaning, please clean the floor brush
Dual-positon carpet/floor brush
P
Narrow nozzle Small brush
For cleaning radiators, comers, edges For cleaning curtains,
ers etc, lamps and other delicate object
NOTE:
In order to reach high-level efficiency w
regularly.
After sales support TEL: [phone]

Accessory compartment
he sofa brush and small brush are stored in the accessory compartment,
FTER USING
ou may fix the stand for floor brush onto the vacuum cleaner.
T
A
Y
orrect Disposal of thC is product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your
used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmental
safe recycling.
After sales support TEL: [phone]

HELPLINE 1300 366 144
Warranty Details
Product Name TRIPLE CYCLONE VACUUM CLEANER
Brand Name LUMINA
Product Number 4941 Model Number LUFJ141
Serial Number
Name
Address
Email Daytime Tel No
Date of purchase
We recommend that you attach your product receipt, showing the date of purchase, to this
Warranty Card and keep for your reference.
In the event of a product fault, please call the After Sales Support telephone number. Please
ensure that you have the product details (as shown on this card) at hand so that we are able to
respond as quickly and efficiently as possible.
AFTER SALES SUPPORT
1300 366 144
[email protected]om.au

1YEAR
WARRANTY
PRODUCT NUMBER: 4941
MODEL NUMBER: LUFJ141
AFTER SALES SUPPORT: 1300 366 144
AFTER SALES SUPPORT: [e-mail]
PURCHASE DATE:

4941
LUFJ141
Made in China
12
After sales support
TEL: [phone]
Triple Cyclone
Vacuum Cleaner
11/2007
220-240V 50Hz 2000W
N15151