LumiSource LSH-ICICLE FLR User manual

v
Icicle Floor Lamp
Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
Part # LSH-ICICLE FLR 22-0914
www.LumiSource.com
ON/OFF
1:Twist to secure X3
2:Pull cord through then twist to secure X3
4: Twist to secure X3
5:Insert bulbs X3
6:Insert glass tubes X3
3:Pull cord through then connect wires X3
7:Plug in adaptor
8:
B
G
PARTS
A B C D E F G
WARNING: LIGHTING
!
•Warning: Risk of re; Use 60 watt bulb max.
• DO NOT use if cord is frayed/damaged.
• Electrocution hazard.
• DO NOT use power tools to assemble OR overtighten hardware.
• Read all instructions carefully and completely before assembly and use. Retain for future reference.
• Keep plastic bags and small parts away from children. • Periodically check for loose hardware; retighten as necessary.
• DO NOT use product if any component becomes damaged.• For residential (non-commercial) use only.
• DO NOT stand on product. Use only for intended purpose.
• Max weight limit 25 lbs.
ON/OFF
A
B
D
C
F
G
EB
(x6)
x3 x3
On/O dimmer switch

Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
STEP 1
STEP 2
Icicle Floor Lamp
ABx3
Feed wire through tubing *Aligned tubing to the base matching
the xed angle. Thread into place
*Threading must be aligned
for a ush connection
Parts needed
Bx3
Parts needed Feed wire through tubing Twist into place
until ush Final Criss-cross orientation
*Align tubing
with xed angle
Repeat x3
Repeat x3
*Assemble on the ground

Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
STEP 3
Icicle Floor Lamp
Parts needed
C D E
*Compare cord lengths Longest cord = PART C
C
*Assemble in order:
Connect cord plugs together Tuck wires in tubing Align tubing & thread into place Twist into place until ush
Medium cord = PART D Shortest cord = PART E
D
E

Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
STEP 4
STEP 5
Icicle Floor Lamp
Fx3
Parts needed
STEP 6
G x3
Parts needed Snap G-9 Bulb into socket
Slide Sconce into sleeve cavity
-Plug in lamp to turn on
-Adjust dimmer switch to
desired lamp brightness
*Clear side
down