Installation instructions Lumlyx Wall LED
Powersupply in gridsystem
1: Components included in package:
2: Mount the brackets on the wall. Use the black markings on the back of the
Lumlyx Wall LED to secure measurement, about 10 cm from the edge of the
luminaire.
Mount the Lumlyx Wall LED on the brackets according to the image setup
shown in the attached illustration.
For Double or Triple Lumlyx Wall LED:
Use the connectors on the back of the luminaire to connect the Lumlyx Wall LED
to eachother. OBS, this is only used if you have Double or Triple units of Lumlyx
Wall.
After mounting the Lumlyx Wall LED, make sure that the distance between the
luminaries are 15 cm.
